- Preface
-
- Add or Edit Call Pickup Group Settings
- Administrator Settings
- Attendant Group Settings
- Auto Attendant Settings
- Backup Settings
- Call Detail Reports
- Carrier Selection Profiles Settings
- Country/Locale Settings
- Cisco Extension Mobility Report
- Configuration Export Settings
- Connection Groups
- Date and Time Settings
- Department Settings
- Devices Settings
- Diagnostics Settings
- Dial Plan Settings
- Hunt List Settings
- Health Summary
- License Settings
- Music On Hold Settings
- Network Settings
- Phones Settings
- Phone Applications Settings
- Post-Setup Wizard
- PSTN Connection Settings
- Reach Me Anywhere Settings
- Restart/Shutdown Settings
- Restore Settings
- Search Settings
- Setup Mode Settings
- Sites Settings
- System Notifications Settings
- Summary Settings
- Upgrade Settings
- Installed Software Settings
- Usage Profiles Settings
- User Settings
- User Preferences Settings
- Voice Feature Settings
- Voicemail Notification Settings
- Index
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
- Updated:
- October 27, 2013
Chapter: Date and Time Settings
Date and Time Settings
Impacted GUIs: Cisco Business Edition 3000 First Time Setup Wizard and Cisco Business Edition 3000 Administrative Interface
The Date and Time page allows you to set the system settings such as the time zone and time. The phones and server use the information that you provide on this page; that is, the phones display the time that you select, and the server uses the information for logs, call processing, and so on. The following table describes the settings that display on the Date/Time page (System Settings—Date and Time).
After you complete the Cisco Business Edition 3000 First Time Setup Wizard, you access the Cisco Business Edition 3000 Administrative Interface to update the date and time for the system ().
| Setting |
Description |
|---|---|
| Country |
This setting, which is read-only, displays the country where your central site and server are located. |
| User Locale |
This setting, which is read-only, displays the locale that is running on your system. This setting displays in the Cisco Business Edition 3000 Administrative Interface. |
| System Time Zone (or Time Zone) |
From the drop-down list box, select the time zone that supports your central site. Time Zone comprises a list of time zones for the selected region. Scroll through the list to select the appropriate time zone. |
Set date and time automatically using time server (NTP) |
Enter the URL of the NTP (Network Time Protocol) server here. The Cisco Business Edition 3000 will then synchronize its time and date from the server provided. Check the Set date and time automatically using time server (NTP) checkbox to let you enter the URL of the NTP server. If you do not want Cisco Business Edition 3000 to synchronize its date and time with an NTP server, leave this box unchecked. |
| System Date |
Click the calendar icon and select a date from the calendar that displays. You can also enter a date in MM/DD/YYYY format. |
| System Time |
To specify the time, click the field and either enter a new time or select a time from the drop-down list box that displays. |
Feedback