Using Cisco Unified Communications Manager License Count Utility, Release 9.1(2)
- Updated:
- February 8, 2014
Chapter: Download Cisco License Count Utility
Download Cisco License Count Utility
This section provides information about downloading and logging on to Cisco License Count Utility. It includes these topics:
- System requirements
- Download Cisco Unified Communications Manager License Count Utility software package
- Log in to Cisco License Count Utility
System requirements
The table below lists the software and hardware requirements for the Cisco License Count Utility workstation.
| Requirement Type | Minimum Requirement |
|---|---|
Software |
Operating system:
Java 6: www.java.com/en/download/faq/java_6.xml Java 7 is not currently supported. |
Download Cisco Unified Communications Manager License Count Utility software package
You can download the Cisco Unified Communications Manager License Count Utility software package to your workstation.
Before You Begin| Step 1 | From the appropriate server host or client workstation, access http://www.cisco.com/cisco/software/navigator.html |
| Step 2 |
On the Download Software page:
|
| Step 3 | Verify that the software and image information are what you want, and click Proceed With Download. |
| Step 4 | Accept the Conditions by entering the appropriate information into the User Details section and by clicking Accept. |
| Step 5 | Read the Cisco End User License Agreement, and click Agree. |
| Step 6 | Select the appropriate Java download option. |
| Step 7 | Download and save the Cisco Unified Communications Manager License Count Utility zip file to your host or workstation. |
| Step 8 | Locate the saved file on the host or workstation, and unzip the file to your local drive or disk. |
Log in to Cisco License Count Utility
Use the following procedure to log in to Cisco License Count Utility. After you log in to Cisco License Count Utility, you can add the Unified Communications Manager servers and generate license reports.
Before You BeginIf you have DLUs that you have not yet installed, and you intend to include them in the migration, install them on your system prior to generating a license report. This will ensure that you have an accurate assessment of your available licenses.
Once you upgrade to Cisco Unified Communications Manager Release 9.0 (or higher), you will no longer be able to install DLUs. To use any currently installed DLUs, you must install them on your Cisco Unified Communications Manager servers prior to upgrading.
Feedback