Custom Phone Rings
This chapter provides information about how you can customize
the phone ring types that are available at your site by creating your own PCM
files and editing the Ringlist.xml file.
Custom Phone Rings Description
Cisco Unified IP Phones ship with two default ring types that are implemented in hardware: Chirp1 and Chirp2. Cisco Unified Communications Manager also provides a default set of additional phone ring sounds that are implemented in software as pulse code modulation (PCM) files. The PCM files, along with an XML file (named Ringlist.xml) that describes the ring list options that are available at your site, exist in the TFTP directory on each Cisco Unified Communications Manager server.
You can get a copy of the Ringlist.xml file from the system using the following admin cli "file" commands:
- file list*
- file view*
- file search*
- file get*
- file dump*
- file tail*
- file delete*
Customize and Modify Configuration Files
You can modify configuration files (for example, edit the xml files) and add customized files (for example, custom ring tones, call back tones, phone backgrounds) to the TFTP directory. You can modify files and/or add customized files to the TFTP directory in Cisco Unified Communications Operating System Administration, from the TFTP Server File Upload page. See the Cisco Unified Communications Operating System Administration Guide for information on how to upload files to the TFTP folder on a Cisco Unified Communications Manager server.
Ringlist.xml File Format Requirements
The Ringlist.xml file defines an XML object that contains a list of phone ring types. Each ring type contains a pointer to the PCM file that is used for that ring type and the text that will display on the Ring Type menu on a Cisco Unified IP Phone for that ring.
The CiscoIPPhoneRinglist XML object uses the following simple tag set to describe the information:
The following characteristics apply to the definition names:
- DisplayName defines the name of the custom ring for the associated PCM file that will display on the Ring Type menu of the Cisco Unified IP Phone.
- FileName specifies the name of the PCM file for the custom ring to associate with DisplayName.
The DisplayName and FileName fields must not exceed 25 characters.
The following example shows a Ringlist.xml file that defines two phone ring types:
<DisplayName>Analog Synth 1</DisplayName>
<DisplayName>Analog Synth 2</DisplayName>
You must include the required DisplayName and FileName for each phone ring type. The Ringlist.xml file can include up to 50 ring types.
PCM File Requirements for Custom Ring Types
The PCM files for the rings must meet the following
requirements for proper playback on
Cisco Unified IP Phones:
Raw PCM (no header)
8000 samples per second
8 bits per sample
Maximum ring size - 16080 samples
Minimum ring size - 240 samples
Number of samples in the ring evenly divisible by 240
Ring starts and ends at the zero crossing.
To create PCM files for custom phone rings, you can use any
standard audio editing packages that support these file format requirements.
Configure a Custom Phone Ring
The following procedure applies to creating custom phone
rings for only the
Cisco Unified IP Phones 7940, 7960, and 7970.
||Create a PCM file for each custom ring (one ring per file). Ensure
that the PCM files comply with the format guidelines that are listed in the
PCM File Requirements for Custom Ring Types.
||Use an ASCII editor to edit the Ringlist.xml file. See the
Ringlist.xml File Format Requirements
for information on how to format this file, along with a sample Ringlist.xml
||Save your modifications and close the Ringlist.xml file.
||Upload the Ringlist.xml file by using the
Cisco Unified Communications Operating System. See the
Cisco Unified Communications Operating System Administration Guide.
||To cache the new Ringlist.xml file, stop and start the TFTP
service by using
Cisco Unified Serviceability or disable and reenable the
"Enable Caching of Constant and Bin Files at Startup" TFTP
service parameter (located in the Advanced Service Parameters).