The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter provides information about IP phone services. Using Cisco Unified Communications Manager Administration, you can define and/or maintain IP phone services that can display on supported Cisco Unified IP Phones models. IP phone services comprise XML applications or Cisco-signed Java Midlets that enable the display of interactive content with text and graphics on some Cisco Unified IP Phones models.
Cisco Unified Communications Manager provides Cisco-provided default IP phone services, which install automatically with Cisco Unified Communications Manager. You can also create customized Cisco Unified IP Phone services for your site.
After you provision the IP phone services, you can perform the following tasks:
Assign the service to phones, that is, if the service is not marked as an enterprise subscription
Provision the IP phone service as a speed dial (service URL button) on the phone, that is, if the service is not marked as an enterprise subscription
Users can log in to the Cisco Unified Communications Self Care Portal and subscribe to these services for their Cisco Unified IP Phones; that is, as long as these IP phone services are not classified as enterprise subscriptions.
Using Cisco Unified Communications Manager Administration, you can define and/or maintain IP phone services that can display on supported Cisco Unified IP Phones models. IP phone services comprise XML applications or Cisco-signed Java Midlets that enable the display of interactive content with text and graphics on some Cisco Unified IP Phones models.
Cisco Unified Communications Manager provides Cisco-provided default IP phone services, which install automatically with Cisco Unified Communications Manager. You can also create customized Cisco Unified IP Phone applications for your site.
After you provision the IP phone services, you can perform the following tasks:
Users can log on to the Cisco Unified Communications Self Care Portal and subscribe to these services for their Cisco Unified IP Phones; that is, as long as these IP phone services are not classified as enterprise subscriptions.
To configure Cisco Unified IP Phone services refer to the following steps.
Step 1 | Provision the
Cisco Unified IP
Phone Service, including the list of parameters that personalize the
service. ( )
Cisco-provided default services display in the Find
and List IP Phone Services Configuration window after a
Cisco Unified Communications
Manager installation or upgrade. If you want to do so, you can update
these services. If you update these services, you may need to update the
Service Provisioning drop-down list box.
Installation and Upgrade Considerations for IP Phone Services To determine the parameters for your IP phone service, see the documentation that supports your IP phone service. |
Step 2 | Configure the
Service Provisioning drop-down list box. How you configure this setting depends
on the phone models that are in your network. If all phone models in your
network can parse the service configuration information from the phone
configuration file, you can choose Internal. If you have phone models in your
network that cannot parse the service configuration information from the phone
configuration file, choose Both. Choosing Both allows you to support phones
that can parse the service information from the phone configuration file and
phone models that can only obtain the service information from a service URL;
some phone models, for example, the
Cisco Unified IP
Phone 7960, can only obtain the service information from a service
URL; to support all phone models in your network, choose
Both.
This drop-down list box displays in the Enterprise Parameter Configuration window ( ), in the Common Phone Profile window ( ), and in the Phone Configuration window ( ). |
Step 3 | For phones that have Messages, Directory, or Service buttons/options, you can specify under which button/option on the phone the service will display. (You do this in the Phone Services Configuration window.) If you want the service to display as a speed dial button on the phone, create and customize a phone button template that includes the service URL button; then, assign the IP phone service to the service URL button. You can only add services as speed dials if the service is not marked as enterprise subscription. |
Step 4 | Notify users
that the
Cisco Unified IP
Phone Services are available.
See the phone documentation for instructions on how users access Cisco Unified IP Phone services. |
Cisco Unified IP Phone services comprise XML applications or Cisco-signed Java Midlets that enable the display of interactive content with text and graphics on Cisco Unified IP Phones. Typical services that might be supplied to a phone include weather information, stock quotes, and news quotes.
With IP phone service provisioning, you can perform the following tasks:
Configure how the phone provisions the service.
You can specify whether the phone gets the service from its configuration file, whether the phone retrieves the service from a custom Service URL, or whether the phone supports both options.
Configure whether the IP phone service displays on the phone.
You can enable or disable a service in Cisco Unified Communications Manager Administration, which allows you to display or not display the service on the phone without deleting the service from the database.
For example, if you do not want to display any call history information on the phone, choose Enable check box for the Missed Calls, Received Calls, Placed Calls, and Intercom Calls in each configuration window.
, and uncheck theConfigure where the IP phone services display on the phone.
By default, for phones with Directory, Messages, or Services buttons/options, the service displays either under one of the buttons/options on the phone. If you want to do so, you can change this assignment in Cisco Unified Communications Manager Administration.
If you want to display the IP phone service as a speed dial on the phone, you can do so. (See the Configure Cisco Unified IP Phone Service.)
Configure whether a service displays on all phones in the cluster that support services (or whether phone users can subscribe to the service through the Cisco Unified Communications Self Care Portal).
If the service is not marked as an enterprise subscription, you (or an end user) can subscribe the service to the phone; for example, you can subscribe a lobby phone or other shared devices to a service if the service is not marked as an enterprise subscription.
If the service is marked as an enterprise subscription, the service displays on all phone in the cluster, unless you disable the service in Cisco Unified Communications Manager Administration (by unchecking the Enable check box in the Phone Services Configuration window).
When the user clicks the Subscribe button, Cisco Unified Communications Manager builds a custom URL and stores it in the database for this subscription. The service then appears on the device services list.
Configure a list of parameters for the IP phone service. These parameters personalize a service for an individual user. Examples of parameters include stock ticker symbols, city names, zip codes, or user IDs. To determine the parameters for your IP phone service, see the documentation that supports your IP phone service.
Tip | IP phone service provisioning allows you to install Cisco-signed Java MIDlets or XML applications on the phone. In addition, IP phone service provisioning provides Cisco-provided default services after an installation or upgrade. |
If you provisioned services before a Cisco Unified Communications Manager upgrade, you may need to perform additional configuration tasks after the upgrade. For example, if you use a custom directory that points to a specific service URL, you may need to update the Service Provisioning drop-down list box.
If you upgrade Cisco Unified Communications Manager and your services do not display or work on the phone, change the Service Provisioning setting to Both.
Cisco Unified Communications Manager automatically provisions Cisco-provided default services. These services display in the Find and List IP Phone Services window ( ). To update these services, click the link in the window. You can change the name of the service, where the default service displays on the phone, and the service URL. If you change the service URL for the default services, choose Both from the Service Provisioning drop-down list box, which allows you to support various phone models in your network; that is, your network can support phone models that can retrieve the service information from the phone configuration file and phone models that can retrieve the service information from an external service URL (for example, the Cisco Unified IP Phone 7960).
Consider the following process, which indicates how a Cisco Unified IP Phone supports XML services and Cisco-signed Java MIDlets:
The phone receives its configuration file after a reset, restart, or boot up and updates its local service configuration if changes exist.
If any service in the configuration file is a Cisco-signed Java MIDlet, the phone compares the provisioned Java MIDlet services to the list of installed Java MIDlet services to determine whether the services need to be installed, uninstalled, upgraded or downgraded. The phone automatically attempts to perform the necessary actions. If the phone fails to install the Java MIDlet on the phone, the phone retries to perform the necessary actions.
For XML services, the information in the phone configuration file points to a web script/file, which returns an XML object. Because these services are not installed on the phone, the phone invokes the service URL only when the user selects the option for the service on the phone.
The phone automatically uninstalls the Cisco-signed Java MIDlet under the following circumstances:
When Cisco Extension Mobility is used to change the current active user on the phones, which occurs during login and logout
If a phone user is not logged into the phone via Cisco Extension Mobility, but the Owner User ID field is updated in Cisco Unified Communications Manager Administration (which changes the current active user for the device)
If the phone registers with a different Cisco Unified Communications Manager cluster that does not support Cisco-signed Java MIDlets (or if the other cluster has a different service configuration for the device)
If the configuration is cleared on the phone by any method; for example, via the Settings menu on the phone or a factory reset on the phone.
Consider the following guidelines and tips when you provision IP phone services in Cisco Unified Communications Manager Administration:
To minimize the impact to performance and call processing, do not put IP phone services on any Cisco Unified Communications Manager server at your site or any server that is associated with Cisco Unified Communications Manager, such as the TFTP server or the Cisco Unified Communications Manager publisher node.
If you do not want to display the service on the phone, uncheck the Enable check box in the IP Phone Services Configuration window ( ).
If you want to display IP phone services on a different button than the button that is specified as the default, update the Services Type setting.
If you change the default service URL for a Cisco-provided default service, for example, you change the service URL for the corporate directory from Application:Cisco/CorporateDirectory to a custom URL, make sure that you choose Both from the Service Provisioning drop-down list box. (See Configure Cisco Unified IP Phone Service.)
If you want to do so, you can configure the Services Provisioning enterprise parameter, which applies the configuration to all phones in the cluster that support IP phone services. (In Cisco Unified Communications Manager Administration, choose .)
If an end user or you subscribe to a disabled service, the phone does not display the service on the button/menu.
If you upgrade Cisco Unified Communications Manager and your services do not display or work on the phone, change the Service Provisioning setting to Both.
To find devices that a specific Cisco Unified IP Phone service is using, in the IP Phone Services Configuration window in Cisco Unified Communications Manager Administration, choose Dependency Records from the Related Links drop-down list box and click Go. The Dependency Records Summary window displays information about devices that are using the Cisco Unified IP Phone Service. To find out more information about the device, click the device, and the Dependency Records Details window displays. If the dependency records are not enabled for the system, the Dependency Records Summary window displays a message.