After you have completed your installation, find out where to go next.
Applications and Apply Licenses
applies to application licenses, not VMware licenses.
steps to access each application, perform first-time setup for some
applications, and apply the licenses.
To access the
administration portal for each individual application, browse to the IP address
of application. Consider the following information:
Optional. For Paging Server
installations: Collect information about the application URL from the virtual
machine console. The default first-time username and password are
Cisco Prime Collaboration
Provisioning: Browse to the IP address and use
globaladmin as the username.
After you purchase an application license, Cisco sends a Product
Authorization Key (PAK) via mail or email. You can use the PAK to generate a
license key for your specific installation using the Cisco Product License
Registration portal at
www.cisco.com/go/license or you can enter the information directly in
Cisco Prime License Manager.
keys using the application administration portal. Refer to the following points
for licensing information specific to whichever applications that you have
Provisioning: No license is required to use Prime Collaboration Provisioning
Standard Edition. You may purchase an upgrade to Advanced Edition if required.
Paging Server: No license
is required to use Basic Paging Server. You may purchase an upgrade to Advanced
Edition if required.
Manager, Cisco Unity Connection, and Cisco Emergency Responder: Browse the IP
Address of Unified Communications Manager and click
Cisco Prime License Manager. Select
License > Install License File and follow
instructions. Having installed your licenses, add application instances for
your UCM Publisher, Unity Connection and Emergency Responder VMs.
For Cisco VCS, Expressway,
TelePresence Server, and Conductor installations: After registering the license
PAK two keys are provided—Release key and Option key. In the administration
Maintenance > Option keys. Apply the Release key
first, and then apply the Option key (s).