Step 3 Launch a web browser, and then enter the LAN IP addresses of the ATA. The default value is 192.168.15.1.
Step 4 Log in to the Configuration Utility. (On first use, enter admin as the username and the password. After logging in, you should configure a unique password that is hard to guess.)
Step 5 Click Administration in the menu bar, and then click Firmware Upgrade in the navigation tree.
Step 6 Click Browse and select the location of the upgrade file that you downloaded.
Step 7 Click the Upgrade button to upgrade the firmware.
Note Upgrading the firmware may take several minutes. Until the process is complete, do not turn off the power, nor press the hardware reset button, nor click the Back button in your current browser.
1.3.2p Open Caveats are the same as in the 1.3.2n Release Notes.
1.3.5p Open Caveats are the same as in the 1.3.5 Release Notes.
SPA100 and SPA232D require new firmware 1.3.2p 1.3.5p to support new SLIC.
Behavior During Times of Network Congestion
Anything that degrades network performance can affect voice and video quality, and sometimes, can cause a call to drop. Sources of network degradation can include, but are not limited to, the following activities:
Administrative tasks, such as an internal port scan or security scan
Attacks that occur on your network, such as a Denial of Service attack
To reduce or eliminate any adverse effects to the devices, schedule administrative network tasks during a time when the devices are not being used or exclude the devices from testing.
Documentation, Service Requests, and Additional Information
Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.