Table of Contents

spa112-122-rn-1-4-1-SR1.fm

Release Notes for Cisco Small Business SPA112/SPA122 Analog Telephone Adapter Firmware Release 1.4.1SR1

First Published: August 15, 2017

Introduction

This document describes describe the updates and fixes in Cisco Small Business SPA112/SPA122 ATA Firmware Release 1.4.1SR1.

IMPORTANT

As with any firmware release, read these release notes before you upgrade the firmware. We also recommend that you back up the configuration before you perform any firmware upgrade.

SPA112, SPA122

(2 types of devices)

Model

SN Range

1.4.1SR1 and 1.4.1(SPA112/SPA122)

1.4.0 (SPA112/SPA122)

1.3.5p and 1.3.2p (SPA112/SPA122)

1.3.5, 1.3.4,

1.3.3, 1.3.2n

1.3.2 or

earlier

Device 1

(128MB Flash + New SLIC)

SPA112

CCQ18400001 to CCQ1841033K

After CCQ18500DAE

Yes

No

No

SPA122

CCQ1834031U to CCQ1834037D

CCQ1847066I to CCQ184707YA

CCQ184902ED to CCQ184904UL

CCQ184904UM to CCQ184904Y3

CCQ184904Y4 to CCQ184904Y5

After CCQ185001YH

Device 2

(128MB Flash + Old SLIC)

SPA112

CCQ175106J3 to CCQ175106OM

CCQ181607OO to CCQ181607U7

CCQ18240E34 to CCQ18400000

CCQ1841033L to CCQ18500D9K

Yes

Yes

No

SPA122

CCQ174602V3 to CCQ1746030M

CCQ181502B7 to CCQ181502GQ

CCQ182002W3 to CCQ1834031T

CCQ1834037E to CCQ18470660

CCQ184707YB to CCQ184902EC

CCQ184904UM to CCQ184904UL

CCQ184904Y4 to CCQ184904Y3

CCQ184904Y6 to CCQ185001YH

Device 3

(32MB Flash + Old SLIC)

SPA112

Before CCQ182002W2

Yes

Yes

Yes

SPA122

Before CCQ181805KR

Note Do not upgrade any device to an unsupported firmware version as detailed in the Hardware and Firmware Compatibility Matrix table.

Note New SLIC devices have a label that reads S/W: Must use 1.3.5(004p) or later.

Upgrade the Firmware

Follow these instructions to upgrade the phone adapter.

Step 1 Download the latest firmware by using the Firmware link on the following web page:

https://www.cisco.com/c/en/us/products/unified-communications/small-business-voice-gateways-ata/index.html

Step 2 Access the adapter Configuration Utility in one of the following two ways:

- If the adapter is SPA112, connect one analog phone to its FXS port, press ***# to access IVR, enter 110 to get SPA112 WAN IP address. Then, launch a web browser, and enter WAN IP address.

- If the adapter is SPA122, connect one PC to its LAN port. Then, launch a web browser, and enter the LAN IP address. The default value is 192.168.15.1.

Step 3 Log in to the Configuration Utility.

Step 4 Click Administration in the menu bar, and then click Firmware Upgrade in the navigation tree.

Step 5 Click Browse and select the location of the upgrade file that you downloaded.

Step 6 Click the Upgrade button to upgrade the firmware.

Note Upgrading the firmware may take several minutes. Until the process is complete, do not turn off the power, press the hardware reset button, or click the Back button in your current browser.

New and Changed Feature

Identifier

Description

CSCvf45915

Payton:  Downgrade Rev Limit not recognize SR version.

CSCvf53408

SPA112 IVR should not have option 210 LAN IP address

Resolved Caveats

The following caveats are resolved after release 1.4.1

Identifier

Description

CSCuq91775

spa122: Call forward still can be set after disable Service

CSCux56548

SPA122-RC stops offering DHCP

CSCuy90064

SPA112 Does not send more than 39 characters SIP Digest Authentication

CSCvd15758

spa112: Config DNS from RC doesn't work

CSCvd62257

SPA122 TR069 (Router parameters) not saved if device is factory reset from ACS server

CSCve79214

spa112&&SPA122 cannot compare SR version when provisioning

Behavior During Times of Network Congestion

Anything that degrades network performance can affect voice and video quality, and in some cases, can cause a call to drop. Sources of network degradation can include, but are not limited to, the following activities:

- Administrative tasks, such as an internal port scan or security scan

- Attacks that occur on your network, such as a Denial of Service attack

To reduce or eliminate any adverse effects to the devices, schedule administrative network tasks during a time when the devices are not being used or exclude the devices from testing.

Documentation, Service Requests, and Additional Information

For more information on Cisco Small Business, see https://www.cisco.com/cisco/web/solutions/small_business/index.html

For more information on Cisco Small Business Support Community, see https://supportforums.cisco.com/community/5541/small-business-support-community

For more information on Cisco Small Business Support and Resources, see https://www.cisco.com/cisco/web/solutions/small_business/small_business_support_and_resources.html

To access the Technical Support and Documentation, see https://www.cisco.com/c/en/us/support/index.html

For downloading the documents, see https://software.cisco.com/download/navigator.html

For more information on Cisco Small Business Voice Gateways Documentation, see https://www.cisco.com/c/en/us/products/unified-communications/small-business-voice-gateways-ata/index.html

Obtain Documentation and Submit a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: https://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2017 Cisco Systems, Inc. All rights reserved.