For SPA51xG, the openssl upgrades from 0.9.7k to openssl 0.9.8zc.
New and Changed Features
BLF Call Pickup Feature
If you configure the BLF call pickup function on a programmable line key, the user can select any registering line key explicitly to pick up the call, regardless of the "vid" setting.
For example: On UUT, register Ext 1 and 2 to server, and map line key 1 and 2 to Ext 1 and 2 respectively. On sidecar, set < Unit 1 Key 1 > = "fnc=sd+cp+blf;firstname.lastname@example.org;nme=1000;vid=1”.
When number 1000 receives an incoming call, line key 1 on UUT sidecar will keep flashing. The call can be answered on UUT ext 1 if user presses line key 1 directly.
If user selects UUT line key 2 (phone changes to dialing status) and presses sidecar line key 1, UUT will find a idle call appearance of Ext 2 to pick up the call. If no idle call is found on Ext 2, UUT uses the Ext line specified by "vid" to find the idle call, and the next behavior is the same as 7.5.5.
SSLv3 disable by default
The Enable SSLv3 feature allows the user to enable or disable the SSLv3. By default, SSLv3 is disabled. SSLv2 is always disabled.
This release contains no Installation information.
The SPA 30x/50x phone do not support font size 12, for Hebrew language.
For SPA phones, option to add “+” sign is missing in the numeric inputs for PAB number entry.
The SPA phones do not support Xuser and Xpassword.
The SPA5x5 phone, displays the CFWD softkey for other call states (dialing), even if the CFWD service is disabled.
For SPA5x5/51x phone, the string, “Blind transfer number” is missing in XML Dictionary.
The following caveats are resolved after release 7.5.6.
The SPA500S phone re-orders lines, if the User ID is same for different domain in email address.
Cisco SPA 5XX and 525 Codec negotiation.
For SPA phones, No SUBSCRIBE messages for shared line after TCP disconnection
For SPA5x5/525 phone, CFWD indication tone is incorrect, after the CFWD on web GUI is enabled.
For SPA5x5/SPA525 phone, there is no audio with SRTP key changes during a call.
The SPA5x5/SPA525 phone, Call Pick on KEMS only works from the first registered SIP line.
For SPA5x5/SPA525 phones Group Paging RTP transmits to intercom even after call ends.
For SAPA525/SPA5X5: 631101733:No transfer softkey when the incoming call is anonymous.
For SPA5x5 phone Group Paging has issue with Symmetric RTP, set to yes in 7.5.6a.
For TR69/104: HTTPS connection between ACS and SPA525/SPA51x is not working
For SPA514G, BLF is broken in firmware 7.5.6.
The SPA5x5 SCA Line seizure - phone reboot issue.
The SPA5x5 Phone freeze after group paging call.
Documentation, Service Requests, and Additional Information
Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.