FindIT Network Management Discussions
Join the FindIT Network Management discussion community and gain valuable insights from industry exp...
63 PostsActivity in Small Business Support Community
Reconnect new iPhone to 150AX APs
I have existing AP which I configured with my old phone. Does anyone know how to reconnect with my new phone without factory resetting the APs?
Poly Voyager 5200 UC
Hello,I wanted to see if the Poly Voyager 5200 UC, Model # 2-206110-333 is compatible with the Cisco CP-8851 phone.Thank you
CBS350 firmware issue
Hi,I have a problem with this configuration as of certain FW. I know version 3.1.0.17 was OK and current one 3.4.0.17 is not and unfortunately it is not possible to downgrade to confirm the issue. I am running DANTE alongside WYrestorm Network HD vid...
Line con 0 and ssh
Hi everyone!Please help me to understand, why under "line con 0" is "transport input|output ssh|telnet" command, how it used and how should I connect devices (ex.:RTR <-> RTR ) on L1 and configure them to make it work?Thank you in advance!
SBS350 mac address secure one port outside building
Hi,I want to secure one LAN port of my CBS350-48P switch. It is located to PoE camera outside the building.It would be great to shut down the port, if another device is put into this port.How can this be solved?Best regards,Heinz
SG350-10-p
Trying to set up new sg350 10 p - tried using the config file from one used and working but it failed and needed factory resetmy other one has the leds turned off so have no idea what I should see ports 1 to 8 light green on left light only when usi...
Update warranty status
Please share the warranty status of the below switches:PSZ27351CMMPSZ27351ADCPSZ27351AU1PSZ27351CCHPSZ27351ASWPSZ273519EGPSZ27351CJUPSZ27351BR2PSZ27351CQMPSZ27351CLZ
Editing My Phone APPS
I enabled SNR on a users line. Works fine.Customer does not like that other phones show the option under CME Services URL>My Phone APPS> Single Number Reach, even when the phone line is not programmed to allow SNR. Is the SNR option something that ...
Does CBS350 have Perpetual PoE
Hello All, Do the CBS350 switches support Perpetual PoE?Best Regards,Issa Abbadi
Can't save or copy config on CBS350
Update:Looks like there's a discrepancy from one Version of Xterm to another, the commands are interpreted differently. This can be closed, thank you very much I'm trying to configure a CBS350 24T-4X with a pre written config file, it's not the first...
Cisco Business App
I can’t seem to find any information about this in the forums or on YouTube. But I have 3 access points on my network in a mesh and I can’t seem to use the iphone app to view my network. I have the Cisco business dashboard enabled. I tried disabling...
Cisco admin app for iOS not accepting my switch’s PID
SLM2016T V02 is not accepted as a valid PID
Caller ID problem in Mexico SPA9000 and SPA400
Hi everyone i'm having issues with caller ID here in mexico, my telephone provider is Telmex and i can figure out the way to get the called Id working. Can you help me with this? I have selected european Fsk in the spa400 and in some calls the caller...
Adding microphones to cisco telepresence touch 10
Hello Cisco communityWe currently utilize the Cisco telepresence touch 10 in our conference rooms. This device seems to work well in smaller rooms but in our large conference room, we would like to add a couple microphones so that people sitting far ...
Cisco Business 250 Management Interface Intermittently Disconnects
Hello,I am new to networking and have been unable to pin point the source of the issue. We have two CBS 250 devices that have been acting odd lately. 2-4 times a week the management interface would disconnect for about 5-20 mins. I've compared config...
| User | Helpful Count |
|---|---|
| 3 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
