Column Heading
|
Creating
|
Updating
|
Deleting
|
Descriptions
|
Alias
|
Required
|
Required
|
Required
|
The unique
text name for the user account.
Any
combination of ASCII or unicode alphanumeric characters, periods, commas,
spaces, and the special characters `, ~, !, @, #, $, %, ^, &, -, _, ', up
to a maximum of 64 characters.
You should
use only printable ASCII characters in the Alias field, because some messaging
features do not support non-printing ASCII characters or Unicode. (The
non-printing ASCII control characters are those below code 0x20.) For example,
IMAP only supports user names that contain printable ASCII characters, so users
with aliases that contain non-printing characters or unicode are unable to
access their Connection messages via IMAP clients. In addition, the Cisco
Object Backup and Restore Application Suite (COBRAS) is unable to back up
messages for such users, because COBRAS uses IMAP to perform the backup.
|
Extension
(Users With
Mailbox Only)
|
Required
|
Optional
|
N/A
|
The number
that callers dial to reach the user.
The value
must be unique among users in the partition.
Any
combination of ASCII alphanumeric characters, from 3 to 40 characters long.
|
TemplateAlias
|
Required
|
N/A
|
N/A
|
The unique
text name for the user template to apply to the account during creation.
Caution
|
If you specify an administrator template for TemplateAlias, the
users do not have mailboxes.
|
|
Password
|
Optional
|
Optional
|
N/A
|
The unique
characters that the user enters to access Unity Connection web applications.
Any
combination of alphanumeric characters, and the following special characters:
~!@#$%^&*()-_+={}|[]:"';<>?/\.
To help
protect Unity Connection from unauthorized access and toll fraud, enter a long,
eight or more characters and non-trivial password.
|
PIN
(Users With
Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The unique
digits that the user enters to access voice messages by phone.
Any
combination of digits 0 through 9.
To help
protect Unity Connection from unauthorized access and toll fraud, enter a
long-six or more digits-and non-trivial PIN.
Note
|
Whenever you update the phone PIN for multiple users through BAT
on Unity Connection, the PIN gets updated on Cisco Unified CM for the users if
the PIN synchronization feature is enabled on the Edit AXL Server page.
|
For more
information on PIN Synchronization, see the "PIN Synchronization between
Unity Connection and Cisco Unified CM" section of the "User Settings"
chapter.
|
Address
|
Optional
|
Optional
|
N/A
|
The physical
address, such as a house number and street name where the user is located, or
with which the user is associated.
Any
combination of ASCII or unicode characters up to a maximum of 128 characters.
|
AltFirstNames
(Users With
Mailbox Only)
|
Optional
|
Optional
|
N/A
|
An alternate
version of the first name. Unity Connection considers alternate names when
users and callers use voice recognition to place a call or address voice
messages.
To
create/update more than one alternate first name per user, separate them by
semicolons (;). If an alternate name needs to contain a semicolon, precede the
semicolon with another semicolon to indicate to Unity Connection that the name
contains a semicolon.
Use this
field in conjunction with the AltLastNames field to add nicknames or maiden
names for users. You can also use alternate names to add phonetic spellings of
hard-to-pronounce names.
Alternate
first names and alternate last names are stored as a pair in the database. When
submitting multiple alternate names, make sure that you have the same number of
alternate first names and alternate last names.
For example,
if you have a user named Elizabeth Brown, who is sometimes known as "Liz" and
sometimes known by her maiden name of "Smith," you would enter the following
AltFirstNames and AltLastNames to ensure that all four combinations are
submitted to the database:
- Elizabeth; Liz; Elizabeth;
Liz
- Brown; Brown; Smith; Smith
|
AltLastNames
(Users With
Mailbox Only)
|
Optional
|
Optional
|
N/A
|
An alternate
version of the last name. Unity Connection considers alternate names when users
and callers use voice recognition to place a call or address voice messages.
To
create/update more than one alternate last name per user, separate them by
semicolons (;). If an alternate name needs to contain a semicolon, precede the
semicolon with another semicolon to indicate to Unity Connection that the name
contains a semicolon.
Use this
field in conjunction with the AltFirstNames field to add nicknames or maiden
names for users. You can also use alternate names to add phonetic spellings of
hard-to-pronounce names.
Alternate
first names and alternate last names are stored as a pair in the database. When
submitting multiple alternate names, make sure that you have the same number of
alternate first names and alternate last names.
For example,
if you have a user named Elizabeth Brown, who is sometimes known as "Liz" and
sometimes known by her maiden name of "Smith," you would enter the following
AltFirstNames and AltLastNames to ensure that all four combinations are
submitted to the database:
- Elizabeth; Liz;
Elizabeth; Liz
- Brown; Brown; Smith;
Smith
|
AltFirstName
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
An
alternate spelling of the user first name in an internationally recognizable
format (i.e., ASCII only characters). The value is used by the phone interface
to search for users and to address messages.
Any
combination of ASCII alphanumeric characters up to maximum of 64 characters.
|
AltLastName
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
An
alternate spelling of the user first name in an internationally recognizable
format (i.e., ASCII only characters). The value is used by the phone interface
to search for users and to address messages.
Any
combination of ASCII alphanumeric characters up to maximum of 64 characters.
|
BillingId
|
Optional
|
Optional
|
N/A
|
Organization-specific information about the user, such as
accounting information, department names, or project codes. The information can
be included in user reports.
Any
combination of digits from 0 through 9 up to a maximum of 32 digits.
|
Building
|
Optional
|
Optional
|
N/A
|
The name
of the building where the user is based.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
City
|
Optional
|
Optional
|
N/A
|
The name
of a locality, such as a city or other geographic region where the user is
located, or with which the user is associated.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
Country
|
Optional
|
Optional
|
N/A
|
The two
letter ISO 3166-1 country code where the user is located, or with which the
user is associated.
Two ASCII
lower or upper case alpha characters.
|
Department
|
Optional
|
Optional
|
N/A
|
The name
or number for the department or sub division of an organization to which the
user belongs.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
DisplayName
|
Optional
|
Optional
|
N/A
|
The user
name that appears on the administration and user interfaces.
If
Displayname is empty and both Firstname, Lastname are present, then Displayname
would be combination of "Firstname Lastname", else Displayname would be Alias.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
DisplayName
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The user
name that appears on the administration and user interfaces.
If
Displayname is empty and both Firstname, Lastname are present, then Displayname
would be combination of "Firstname Lastname", else Displayname would be Alias.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
EmailAddress
|
Optional
|
Optional
|
N/A
|
The email
address of the user. This corresponds to the Corporate Email Address field in
Cisco Unity Connection Administration.
Note
|
The
field is only for directory information purposes. Unity Connection does not use
the address to deliver incoming messages.
|
Any
combination of ASCII alphanumeric characters, and the special characters
hyphen, underscore, period and at sign ("@"), up to a maximum of 320
characters.
|
MailName
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Name used
to construct part of SMTP address before the @ sign.
A name is
needed for unicode aliases that cannot be converted into a valid SMTP
addresses.
|
EmployeeId
|
Optional
|
Optional
|
N/A
|
The
numeric or alphanumeric identifier assigned to a user, typically based on order
of hire or association with an organization.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
EnhancedSecurityAlias
|
Optional
|
Optional
|
N/A
|
The unique
text name used to identify and authenticate the user with an RSA SecurID
security system.
Any
combination of ASCII or unicode characters up to a maximum of 50 characters.
|
FirstName
|
Optional
|
Optional
|
N/A
|
The user
first name.
Any
combination of ANSI or Unicode alphanumeric characters, periods, commas,
spaces, and the special characters `, ~, !, @, #, $, %, ^, &, -, _, ', up
to a maximum of 64 characters.
|
Initials
|
Optional
|
Optional
|
N/A
|
The
initials of part or all of the user name.
Any
combination of ANSI or unicode alphanumeric characters, periods, commas,
spaces, and the special characters `, ~, !, @, #, $, %, ^, &, -, _, ', up
to a maximum of 6 characters.
|
Language
|
Optional
|
Optional
|
N/A
|
The
preferred language of the user.
Use the
Windows language code, such as 1033 for U.S. English. For a list of supported
languages and the corresponding language codes, see the "Numeric and Alphabetic
Codes for Supported Languages" section in the System Requirements for Cisco
Unity Connection12.x at
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/12x/requirements/b_12xcucsysreqs.html.
|
LastName
|
Optional
|
Optional
|
N/A
|
The user
last name.
Any
combination of ANSI or unicode alphanumeric characters, periods, commas,
spaces, and the special characters `, ~, !, @, #, $, %, ^, &, -, _, ', up
to a maximum of 64 characters.
|
Manager
|
Optional
|
Optional
|
N/A
|
The name
of the manager or supervisor of the user.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
PostalCode
|
Optional
|
Optional
|
N/A
|
For users
located in the United States, the zip code where the user is located, or with
which the user is associated. For users located in Canada, Mexico, and other
countries, the postal code where the user is located, or with which the user is
associated.
Any
combination of ASCII or unicode characters up to a maximum of 40 characters.
|
State
|
Optional
|
Optional
|
N/A
|
The full
name of the state or province where the user is located, or with which the user
is associated.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
TimeZone
|
Optional
|
Optional
|
N/A
|
The time
zone with which the user account is associated.
|
Title
|
Optional
|
Optional
|
N/A
|
The
position or function of the user within the organization, for example "Vice
President."
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
COSDisplayName
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The unique
text name that is displayed on the user interfaces for the class of service
(COS) with which the user account is associated.
Any
combination of ASCII or Unicode characters, up to a maximum of 64 characters.
|
ClientMatterCode
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The
required Client Matter Code (CMC) to transmit to Cisco Unified Communications
Manager (CM), if applicable, when the user makes an outbound call.
CMCs are
typically used to enable the system to track calls for account or billing
purposes.
The value
is used only if the system is using Cisco Unified CM and if the version of
Cisco Unified CM is 4.1 and later.
Whether
the CMC is transmitted depends on the setting for outbound calls. The user CMC
is used only if the outbound call does not have its own CMC.
The code
length can be from 1 through 40 characters.
|
TransferType
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Alternate transfer rule.) Determines the
way in which Unity Connection transfers calls from the automated attendant or a
directory handler to the user phone for the Alternate transfer rule:
- 0-supervised
- 1-unsupervised (also
called a "Release to Switch" transfer)
|
TransferRings
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Alternate transfer rule.) Determines the
number of times the user extension rings before Unity Connection considers the
call unanswered ("ring-no-answer") and plays the applicable greeting. This
setting is applicable only when the TransferType is configured for a supervised
transfer.
An
integer value from 2 through 100.
|
TransferExtension
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Alternate transfer rule.) The phone
number that Unity Connection transfers calls to if TransferAction is set to 1.
|
TransferAction
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Alternate transfer rule.) Determines
whether Unity Connection transfers the incoming calls for the user to the user
greeting or to the extension specified in TransferExtension:
- 0-Transfer to the
greeting.
- 1-Transfer to
TransferExtension.
|
RnaAction
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Alternate transfer rule.) This setting
is applicable only when the TransferType is configured for a supervised
transfer. Determines whether Unity Connection transfers the call to the
applicable greeting or releases the call to the phone system when a call is
unanswered ("ring-no-answer"):
- 0-Release the call to
the phone system.
- 1-After the number of
rings specified in the TransferRings field, transfer the call to the
appropriate greeting.
|
StandardTransferType
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Standard transfer rule.) Determines the
way in which Unity Connection transfers calls from the automated attendant or a
directory handler to the user phone for the standard (default) transfer rule:
- 0-supervised
- 1-unsupervised (also
called a "Release to Switch" transfer)
|
StandardTransferRings
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Standard transfer rule.) Determines the
number of times the user extension rings before Unity Connection considers the
call unanswered ("ring-no-answer") and plays the applicable greeting. This
setting is applicable only when the StandardTransferType is configured for a
supervised transfer.
An
integer value from 2 through 100.
|
StandardTransferExtension
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Standard transfer rule.) The phone
number that Unity Connection transfers calls to if StandardTransferAction is
set to 1.
|
StandardTransferAction
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Standard transfer rule.) Determines
whether Unity Connection transfers the incoming calls for the user to the user
greeting or to the extension specified in StandardTransferExtension:
- 0-Transfer to the
greeting.
- 1-Transfer to
StandardTransferExtension.
|
StandardRnaAction
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Standard transfer rule.) This setting is
applicable only when the StandardTransferType is configured for a supervised
transfer. Determines whether Unity Connection transfers the call to the
applicable greeting or releases the call to the phone system when a call is
unanswered ("ring-no-answer"):
- 0-Release the call to
the phone system.
- 1-After the number of
rings specified in the StandardTransferRings field, transfer the call to the
appropriate greeting.
|
ClosedTransferType
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Closed transfer rule.) Determines the
way in which Unity Connection transfers calls from the automated attendant or a
directory handler to the user phone for the Closed transfer rule:
- 0-supervised
- 1-unsupervised (also
called a "Release to Switch" transfer)
|
ClosedTransferRings
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Closed transfer rule.) Determines the
number of times the user extension rings before Unity Connection considers the
call unanswered ("ring-no-answer") and plays the applicable greeting. This
setting is applicable only when the ClosedTransferType is configured for a
supervised transfer.
An
integer value from 2 through 100.
|
ClosedTransferExtension
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Closed transfer rule.) The phone number
that Unity Connection transfers calls to if ClosedTransferAction is set to 1.
|
ClosedTransferAction
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Closed transfer rule.) Determines
whether Cisco Unity Connection transfers the incoming calls for the user to the
user greeting or to the extension specified in ClosedTransferExtension:
- 0-Transfer to the
greeting.
- 1-Transfer to
ClosedTransferExtension.
|
ClosedRnaAction
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
(Applicable only to the Closed transfer rule.) This setting is
applicable only when the StandardTransferType is configured for a supervised
transfer. Determines whether Unity Connection transfers the call to the
applicable greeting or releases the call to the phone system when a call is
unanswered ("ring-no-answer"):
- 0-Release the call to
the phone system.
- 1-After the number of
rings specified in the ClosedTransferRings field, transfer the call to the
appropriate greeting.
|
MWIExtension
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The phone
number (extension) of the default message waiting indicator (MWI) to light when
callers leave messages for the user.
If no
value is provided, Unity Connection uses the number of the primary extension.
|
MWIMediaSwitchDisplay Name
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name displayed on the system administration interface of the phone system used
to turn message waiting indicators on and off for the phone number specified in
the MWIExtension column.
If no
value is provided, Unity Connection uses the phone system specified in the
MediaSwitchDisplayName column.
|
MaxMsgLen
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The
maximum duration (in seconds) for recording a message from an outside
(unidentified) caller.
The
length specified can be from 1 through 1,200 seconds.
|
Play After
Message Recording
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Indicates
whether Unity Connection plays a recording to the callers after a message has
been sent:
- 0-Do Not Play Recording.
Select this setting to disable the feature. After a message is sent, users do
not hear any recording.
- 1-System Default
Recording. After a message is sent, users hear the default system recording.
- 2-Play Recording. After
a message is sent, users hear the cutomized recording.
Note
|
By
Default the System Default Recording option is selected.
|
|
PlayPostGreetingRecording
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Indicates
whether Unity Connection plays a recording to callers before allowing them to
leave a message for the user. You can also indicate whether all callers hear
the recording or only unidentified callers:
- 0-Do Not Play Recording.
Select this setting to disable the feature. Before they leave a message,
callers hear only the user greeting.
- 1-Play Recording to All
Callers. Before they leave a message, users and outside callers hear the user
or call handler greeting and then the recording.
- 2-Play Recording Only to
Unidentified Callers. Before they leave a message, outside callers hear the
user greeting and then the post-greeting recording. Likewise, users who call
from a phone that is not associated with their account and do not sign in to
Unity Connection hear the post-greeting recording.
|
PostGreetingRecordingDisplayName
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The
display name of the post-greeting recording that plays after the greeting for
this user.
|
ForcedAuthoizationCode
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The
required forced-authorization code (FACs) to transmit to Cisco Unified
Communications Manager, if applicable, when the user makes an outbound call.
Your
organization may use FACs to prevent toll fraud. For example, users may have to
provide FACs to place long-distance calls.
The value
is used only if the system is using Cisco Unified CM and its version is 4.1 and
later.
The code
length can be from 1 to 40 characters.
|
ListInDirectory
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Determines
whether the user is included in the phone directory for outside callers:
- 0-Not included in the
directory
- 1-Included in the
directory
|
CreateSmtpProxyFromCorp
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Determines
whether Unity Connection uses the value in the EmailAddress column (Corporate
Email Address field in Cisco Unity Connection Administration) to automatically
create a new SMTP proxy address, so that IMAP messages to or from this email
address can be properly identified by Unity Connection as belonging to this
user. If you uncheck it, no such SMTP proxy address is automatically created.
- 0-SMTP proxy address is
not automatically created.
- 1-SMTP proxy address is
automatically created using the Corporate Email Address field.
|
MediaSwitchDisplayName
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name displayed on the system administration interface of the phone system used
for Telephone Record and Playback (TRAP) sessions and to turn message waiting
indicators on and off.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
PhoneNumber_HomePhone
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The user
home phone number.
Any
combination of the digits 0-9, T, t, commas, hashes (#), and asterisks (*), up
to a maximum of 38 characters.
|
Active_HomePhone
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Whether
the user home phone device is enabled:
|
DisplayName_HomePhone
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name for the user home phone displayed on the Unity Connection interfaces.
Any
combination of ASCII or Unicode characters, up to a maximum of 64 characters.
|
PhoneNumber_WorkPhone
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The user
work phone number.
Any
combination of the digits 0-9, T, t, commas, hashes (#), and asterisks (*), up
to a maximum of 38 characters.
|
Active_WorkPhone
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Whether
the user work phone device is enabled:
|
DisplayName_WorkPhone
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name for the user work phone displayed on the Unity Connection interfaces.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
PhoneNumber_MobilePhone
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The user
mobile phone number.
Any
combination of the digits 0-9, T, t, commas, hashes (#), and asterisks (*), up
to a maximum of 38 characters.
|
Active_MobilePhone
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Whether
the user mobile phone device is enabled:
|
DisplayName_MobilePhone
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name for the user mobile phone displayed on the Unity Connection interfaces.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
PhoneNumber_Pager
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The user
pager number.
Any
combination of the digits 0-9, T, t, commas, hashes (#), and asterisks (*), up
to a maximum of 38 characters.
|
AfterDialDigits_Pager
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Digits to
send to the pager. This is referred to in Unity Connection Administration as
"Extra Digits." For numeric pagers, the field holds numeric text to send to the
pager; for text pagers, the field is blank.
The
maximum length is 32 digits.
|
Active_Pager
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Whether
the user pager device is enabled:
|
DisplayName_Pager
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name for the user pager displayed on the Unity Connection interfaces.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
PhoneNumber_TextPager1
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
This phone
number is entered in the From field on the default SMTP device for the user.
Any
combination of ASCII only alphanumeric characters, hyphens, underscores,
periods, at signs ("@"), commas and hashes (#), up to a maximum of 40
characters.
|
SmtpAddress_TextPager1
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Message notifications for the user are sent to this SMTP
address.
Note
|
The
SMTP address cannot include non-ASCII characters.
|
|
Active_TextPager1
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Whether
the user text pager device is enabled:
|
DisplayName_TextPager1
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name for the user text pager displayed on the Unity Connection interfaces.
Any
combination of ASCII or unicode characters up to a maximum of 64 characters.
|
Extension_Alt1
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The first
alternate extension for the user.
The value
must be unique in the partition.
Any
combination of ASCII alphanumeric characters, from 1 to 40 characters long.
|
Extension_Alt1_Partition
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name of the partition to which the first alternate extension belongs.
|
Extension_Alt2
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The second
alternate extension for the user.
The value
must be unique in the partition.
Any
combination of ASCII alphanumeric characters, from 1 to 40 characters long.
|
Extension_Alt2_Partition
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name of the partition to which the second alternate extension belongs.
|
Extension_Alt3
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The third
alternate extension for the user.
The value
must be unique in the partition.
Any
combination of ASCII alphanumeric characters, from 1 to 40 characters long.
|
Extension_Alt3_Partition
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name of the partition to which the third alternate extension belongs.
|
Extension_Alt4
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The fourth
alternate extension for the user.
The value
must be unique in the partition.
Any
combination of ASCII alphanumeric characters, from 1 to 40 characters long.
|
Extension_Alt4_Partition
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name of the partition to which the fourth alternate extension belongs.
|
Extension_Alt5
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The fifth
alternate extension for the user.
The value
must be unique in the partition.
Any
combination of ASCII alphanumeric characters, from 1 to 40 characters long.
|
Extension_Alt5_Partition
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name of the partition to which the fifth alternate extension belongs.
|
Extension_Alt6
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The sixth
alternate extension for the user.
The value
must be unique in the partition.
Any
combination of ASCII alphanumeric characters, from 1 to 40 characters long.
|
Extension_Alt6_Partition
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name of the partition to which the sixth alternate extension belongs.
|
Extension_Alt7
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The
seventh alternate extension for the user.
The value
must be unique in the partition.
Any
combination of ASCII alphanumeric characters, from 1 to 40 characters long.
|
Extension_Alt7_Partition
|
Optional
|
Optional
|
N/A
|
The text
name of the partition to which the seventh alternate extension belongs.
|
Extension_Alt8
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The eighth
alternate extension for the user.
The value
must be unique in the partition.
Any
combination of ASCII alphanumeric characters, from 1 to 40 characters long.
|
Extension_Alt8_Partition
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name of the partition to which the eighth alternate extension belongs.
|
Extension_Alt9
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The ninth
alternate extension for the user.
The value
must be unique in the partition.
Any
combination of ASCII alphanumeric characters, from 1 to 40 characters long.
|
Extension_Alt9_Partition
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The text
name of the partition to which the ninth alternate extension belongs.
|
CcmId
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The Cisco
Unified Communications Manager user ID that is associated with the user.
Any
combination of characters except for non-printing ASCII characters, up to a
maximum of 128 characters.
|
Exchange2010Service_Service DisplayName
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The
display name of the Exchange 2010 external service that corresponds with the
Exchange 2010 server that contains the Exchange 2010 mailbox for this user.
To add an
Exchange 2010 external service for a user, include values for both the
Exchange2010Service_ServiceDisplayName and Exchange2010Service_EmailAddress
fields in the CSV input file.
To remove
the Exchange 2010 service for a user, set at least one of either the
Exchange2010Service_ServiceDisplayName and Exchange2010Service_EmailAddress
fields to %null% in the CSV input file
|
Exchange2010Service_Email Address
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The
primary email address that is associated with the Exchange mailbox that you
want this user to be able to access.
To add an
Exchange 2010 external service for a user, include values for both the
Exchange2010Service_ServiceDisplayName and Exchange2010Service_EmailAddress
fields in the CSV input file
|
Exchange2010Service_UserId
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The
Windows domain alias for the user in Exchange 2010 (useful when the setting is
different from the user alias).
|
Exchange2010Service_User Password
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The
Windows domain password for the user.
|
EmailAction
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Action to
take for a voice message:
- 0-Reject the message
- 1-Accept the message
- 2-Relay the message
- 3-Accept the message and
relay a copy
|
VoiceMailAction
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Action to
take for a voice message:
- 0-Reject the message
- 1-Accept the message
- 2-Relay the message
- 3-Accept the message and
relay a copy
|
FaxAction
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Action to
take for a voice message:
- 0-Reject the message
- 1-Accept the message
- 2-Relay the message
- 3-Accept the message and
relay a copy
|
DeliveryReceiptAction
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Action to
take for a voice message:
- 0-Reject the message
- 1-Accept the message
- 2-Relay the message
- 3-Accept the message and
relay a copy
|
RelayAddress
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Specifies
the address to relay incoming message when one or more of the actions
(EmailAction, VoicemailAction, FaxAction, DeliveryReceiptAction) is set to 2
(Relay the message).
RelayAddress is in the format of someone@somewhere or someone@somewhere.com.
|
SmtpProxyAddresses
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The full
SMTP proxy addresses for users. To create/update more than one address per
user, separate them by commas and surround them all with double quotes. For
example:
"someone1@somewhere.com,someone2@somewhere.com"
|
LdapCcmUserID
|
Optional
|
Optional
|
N/A
|
The value
of the LDAP field that you mapped to the Unity Connection Alias field when you
configured Cisco Unity Connection to integrate with an LDAP directory. See the
Task List for Configuring LDAP
section.
This
field is used when you create Unity Connection users by importing LDAP user
data and when you integrate existing Unity Connection users with LDAP users.
|
CorporatePhoneNumber
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The phone
number of the user.
Note that
the field is only for directory information purposes. Cisco Unity Connection
does not use the phone number to route calls.
|
DisplayName_HTML1
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
A
descriptive name for the notification device. This field is required if you
want to create an HTML notification device.
|
Active_HTML1
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Enables
the HTML notification device.
|
callback_HTML1
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The phone
number that the user use to play and record voice message.
|
disableMobPCA_HTML1
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Disallow
the users to change the mobile number from Cisco PCA and Mini Web inbox for
HTML notification.
|
disableTemplatePCA_HTML1
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Disallow
the users to change the notification template from PCA.
|
SmtpAddress_HTML1
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The email
address of the user text-compatible mobile phone, or another email account
(such as a home email address) on which the user receives the HTML
notification. Up to 128 characters can be entered in this field.
SmtpAddress_HTML1 column is mandatory if Active_HTML1 column is set to 1.
|
templateName_HTML1
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
A default
or a customized template name for HTML notification device.
|
DisplayName_HTML2
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
A
descriptive name for the notification device. This field is required if you
want to create an HTML Missed Call notification device.
|
Active_HTML2
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Enables
the HTML Missed Call notification device.
|
callback_HTML2
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The phone
number that the user use to view the missed calls.
|
disableMobPCA_HTML2
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Disallow
the users to change the mobile number from Cisco PCA and Mini Web inbox for
HTML Missed Call notification.
|
disableTemplatePCA_HTML2
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Disallow
the users to change the notification template from PCA. This field is
applicable for HTML Missed Call notification template.
|
SmtpAddress_HTML2
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The email
address of the user text-compatible mobile phone, or another email account
(such as a home email address) on which the user receives the HTML Missed Call
notification. Up to 128 characters can be entered in this field.
SmtpAddress_HTML2 column is mandatory if Active_HTML2 column is set to 1.
|
templateName_HTML2
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
A default
or a customized template name for HTML Missed Call notification device.
|
DisplayName_HTML3
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
A
descriptive name for the notification device. This field is required if you
want to create an HTML Scheduled Summary notification device.
|
Active_HTML3
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Enables
the HTML Scheduled Summary notification device.
|
callback_HTML3
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The phone
number that the user use to play the voice messages received in Summary
notification.
|
disableMobPCA_HTML3
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Disallow
the users to change the mobile number from Cisco PCA and Mini Web inbox for
HTML Scheduled Summary notification.
|
disableTemplatePCA_HTML3
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Disallow
the users to change the notification template from PCA. This field is
applicable for HTML Scheduled Summary notification template.
|
SmtpAddress_HTML3
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
The email
address of the user text-compatible mobile phone, or another email account
(such as a home email address) on which the user receives the Summary
notification of the voice messages. Up to 128 characters can be entered in this
field.
SmtpAddress_HTML3 column is mandatory if Active_HTML3 column is set to 1.
|
templateName_HTML3
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
A default
or a customized template name for HTML Scheduled Summary notification device.
|
DisplayName_HTML3
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
A
descriptive name for the notification device. This field is required if you
want to create an HTML Scheduled Summary notification device.
|
Active_HTML3
(Users
With Mailbox Only)
|
Optional
|
Optional
|
N/A
|
Enables
the HTML Scheduled Summary notification device.
|