This command allows you to delete an administrator account.

Command Syntax

delete account account-name

Syntax Description

Requirements

Command privilege level: 4

Allowed during upgrade: No

This command allows you to delete the IP address for a DNS server.

Command Syntax

delete dns ip-address

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command deletes a DSCP port tag.

Command Syntax

delete dscp [port-tag]

Syntax Description

Useage Guideline

After you delete an enabled port tag, DSCP marking on that port tag stops. You can recreate a deleted port tag when you use the set dscp marking command; enter the name of the port tag that you previously deleted.

Tip	Use the command show dscp defaults to list the configured port tags

Command Mode

Administrator (admin:)

This command allows you to delete IPsec policies and associations.

Command Syntax

delete ipsec policy{ALL| policy-name}

association policy-name {ALL| association-name}

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command allows you to delete a particular process.

Command Syntax

delete process process-id [force | terminate | crash]

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command allows you to delete the SMTP host.

Command Syntax

delete smtp

Requirements

Command privilege level: 1

Allowed during

This command checks the /usr directory tree to see whether any files or directories have been added, removed, or changed in size since the last fresh installation or upgrade and displays the results.

Command Syntax

file check [detection-size-kb]

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: No

This command deletes one or more files.

Command Syntax

file delete {activelog|inactivelog|install} directory/filename [detail] [noconfirm]

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Example

The following example deletes the install log:

file delete install install.log

This command dumps the contents of a file to the screen, a page at a time.

Command Syntax

file dump {activelog |inactivelog |install } directory/filename [detail] [hex] [recent] [regexpexpression]

Syntax Description

Requirements

Command privilege level: 1 for logs

Allowed during upgrade: Yes

Example

This command dumps contents of file _cdrIndex.idx:

file dump activelog cm/cdr/_cdrIndex.idx

This command sends a log to another system using SFTP.

Command Syntax

file get {activelog |inactivelog |install|partBsalog|salog } directory/filename [reltime|abstime] [match][recurs]

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Examples

This command gets all files in the activelog operating system directory that match the string plat:

file get activelog platform match plat

This command gets all operating system log files for a particular time period:

file get activelog platform/log abstime 18:00:9/27/2005 18:00:9/28/2005

This command lists the log files in an available log directory.

Command Syntax

file list {activelog|inactivelog|install|partBsalog|salog} directory/filename[page|detail|reverse] [date | size]

Syntax Description

Requirements

Command privilege level: 1 for logs

Allowed during upgrade: Yes

Examples

This example lists operating system log files with details:

file list activelog platform/log page detail

This example lists directories created for Emergency Responder logs:

file list activelog er/logs

This example lists Emergency Responder logs in a specified directory by size:

file list activelog er/logs size

This command searches the content of a log and displays the matching lines a page at a time.

Command Syntax

file search{ activelog | inactivelog |install } directory/filename reg-exp [abstime hh:mm:ss mm/dd/yyyy hh:mm:ss mm/dd/yyyy] [ignorecase] [reltime {days | hours | minutes} timevalue]

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Example

file search activelog platform/log/platform.log Err[a-z] ignorecase

This command prints the last few lines of a log file.

Command Syntax

file tail {activelog |inactivelog |install } directory/filename[detail] [hex] [lines]

Syntax Description

Requirements

Command privilege level: 1 for logs

Allowed during upgrade: Yes

Example

This example tails the operating system CLI log file:

file tail activelog platform/log/cli00001.log

This command displays the contents of a file.

Command Syntax

file view {activelog|inactivelog|install|system-management-log}directory/filename

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Examples

This example displays the install log:

file view install install.log

This example displays a particular CDR file:

file view activelog er/logs/CERAdmin01.log

Use this command to unregister smart licensing on Cisco Emergency Responder and remove the product from Cisco Smart Software Manager.

Requirements

Command privilege level: 4

Allowed during upgrade: Yes

Use this command to register Cisco Emergency Responder with Cisco Smart Software Manager using an ID token.

Requirements

Command privilege level: 4

Allowed during upgrade: Yes

Use this command to reregister Cisco Emergency Responder with Cisco Smart Software Manager using an ID token.

Requirements

Command privilege level: 4

Allowed during upgrade: Yes

Use this command to manually renew the license usage information.

Requirements

Command privilege level: 4

Allowed during upgrade: Yes

Use this command to manually renew the license registration.

Requirements

Command privilege level: 4

Allowed during upgrade: Yes

This command enables to update transport setting as Direct.

Command Syntax

license smart call-home destination address default

This command enables to update transport setting as Transport Gateway/Satellite.

Command Syntax

license smart call-home destination address TransportGateway <url>

This command enables to update transport setting as as HTTP/HTTPS Proxy.

Command Syntax

license smart call-home proxy <ip> <port>

This command enables the License Reservation.

Command Syntax

license smart reservation enable

Use this command to disable the license reservation feature.

Requirements

Command privilege level: 4

Allowed during upgrade: Yes

Use this command to cancel the ongoing reservation request.

Command Syntax

license smart reservation cancel

Use this command to request for reservation code that is entered while performing License Reservation in Cisco Smart Software Manager.

Command Syntax

license smart reservation request

Use this command to install the license reservation authorization-code generated on the Cisco Smart Software Manager.

Command Syntax

license smart reservation install "<authorization-code>"

Use this command to generate a return code that must be entered into the Cisco Smart Software Manager to return the previously reserved licenses to the virtual account pool.

Command Syntax

license smart reservation return

Use this command to generate a return code using the authorization code specified on the command line. The return code must be entered into the Cisco Smart Software Manager to return the licenses to the virtual account pool.

Requirements

Command privilege level: 4

Allowed during upgrade: Yes

This command allows you to run an SQL command.

Command Syntax

run sql sql_statement

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

Examples

This example runs an SQL command:

run sql select * from cerserver

This command sets up a new account on the operating system.

Command Syntax

set account name

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: No

This command is used to enable the user account if the account is disabled due to the password inactivity feature.

Password inactivity period is the number of days of inactivity after a password has expired before the account is disabled.

After entering this command, the user account is enabled with current system settings.The system settings are Password min days, Password Max days, Password inactivity period.

Command Syntax

set account enable userid

Syntax Description

Example

This example runs a set account enable command:

set account enable test

Enabling the account 'test' with current settings....

.....

Successfully enabled account 'test'

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command shows the current account locking settings.

Command Syntax

show accountlocking

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command disables accountlocking for the current administrator accounts.

Command Syntax

set accountlocking disable

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command enables accountlocking for the current administrator accounts.

Command Syntax

set accountlocking enable

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command configures the unlock time for Emergency Responder OS administrator accounts in seconds.

Acceptable values should be equal to or greater than 300 seconds, but less than 3600 seconds (60 mins).

Command Syntax

set accountlocking unlocktime seconds

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command deletes the certificate test.pem for the unit IPsec.

Command Syntax

set cert delete [unit] [name]

Syntax Description

Example

set cert
		  delete ipsec test.pem

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command imports the certificate for a specific unit | trust.

Command Syntax

set cert import [unit name]

Syntax Description

Example

The following example runs a set cert import command:

set cert
		  import trust tomcat
		

Successfully regenerated certificate for tomcat.

Please restart services related to tomcat for the new certificate to become active.
		

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command regenerates the certificate for the unit.

Command Syntax

set cert regen [name]

Parameter

Name is unit name

Syntax Description

Example

This example runs a set cert regen command:

set cert regen tomcat

Successfully regenerated certificate for tomcat.

Please restart services related to tomcat for the new certificate to become active.

Requirements

Command privilege level: 1

Allowed during upgrade: No

For the current CLI session, this command turns automatic pagination on or off.

Command Syntax

set cli pagination {on | off}

Syntax Description

Requirements

Level privilege: 1

Command privilege: 1

Allowed during upgrade: No

Example

admin:set cli pagination off
Automatic pagination is turned off

This command sets the time, in minutes, after which an active CLI session times out and disconnects.

Command Syntax

set cli session timeoutminutes

Syntax Description

Useage Guidelines

Be aware that the new session timeout value becomes effective immediately for a new CLI session; however, active sessions retain their original timeout value. Also the show cli session timeout command reflects the new value, even if the current session does not use that value.

Note	This setting gets preserved through a software upgrade and does not get reset to the default value.

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command changes the CLI command prompt so that it displays how many CLI commands have executed.

Command Syntax

set commandcount {enable | disable}

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

It regenerates the certificate for the unit name.

Command Syntax

set csr gen name

Syntax Description

Example

set csr gen tomcat

Successfully regenerated certificate for tomcat.

Please restart services related to tomcat for the new certificate to become active.

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command sets the date on the system.

Command Syntax

set date HH:mm:ss:MM/DD/YY

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

Example

To set date and time to 2:10:33 p.m. February 13, 2008:

set date 14:10:33:02/13/08
		

This command enables or disables DSCP marking on outgoing TCP or UDP packets. You can enable or disable DSCP on a single port tag, or on all port tags at once.

Command Syntax

set dscp {enable | disable} {all| port_tag}

Syntax Description

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command sets the factory default DSCP settings for all of the port tags.

Command Syntax

set dscp defaults

Command Mode

Administrator (admin:)

Useage Guidelines

This command removes all non-default DSCP settings. The command show dscp defaults displays the factory default DSCP settings.

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command sets DSCP markings on port tags by using well-known DSCP classes and numeric values.

Command Syntax

set dscp marking port_tag value

Syntax Description

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: No

Useage Guidelines

This command allows you to set IPSec policies and associations.

Command Syntax

set ipsec

policy {ALL | policy-name}

association policy-name {ALL | association-name}

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command allows you to enable or disable logging.

Command Syntax

set logging {enable | disable}

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: No

This command configures the cluster publisher hostname. Changing the hostname is possible only from the subscriber in a server group. This is supported when migrating from MCS to VMware platforms, but not in any other scenarios.

A temporary loss of network connectivity occurs while the network is being restarted with the new configuration.

Command Syntax

set network cluster publisher hostname name

Syntax Description

This command configures the cluster publisher IP address.

A temporary loss of network connectivity occurs while the network is being restarted with the new configuration.

Command Syntax

set network cluster publisher ip addr

Syntax Description

This command enables or disables DHCP for Ethernet interface 0. You cannot configure Ethernet interface 1.

Command Syntax

set network dhcp eth0{enable| disable}{node_ip| net_mask| gateway_ip}

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command sets the IP address for the primary or secondary DNS server.

Command Syntax

set network dns {primary | secondary} ip-address

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command sets DNS options.

Command Syntax

set network dns options [timeout seconds] [attempts number] [rotate]

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command sets the domain name for the system.

Command Syntax

set network domain domain-name

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command enables and disables network fault tolerance.

Command Syntax

failover {enable | disable}

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command enables you to configure the IP address of the network gateway.

Command Syntax

set network gateway ip-address

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command allows an administrator to set the network host name, change the IP address of the node, and restart the system.

Before attempting this command, the administrator should have a valid DRF backup.

Command Syntax

set network hostname hostname

Syntax Description

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: No

Useage Guidelines

The system asks whether you want to continue to execute this command.

Caution

If you continue, this command causes the system to restart.

Example

admin:set network hostname
WARNING: Changing this setting will invalidate software license on this server. The license will have to be re-hosted.
Continue(y/n):
Continue (y/n)?y

ctrl-c: To quit the input.

*** W A R N I N G ***
Do not close this window without first canceling the command.

This command will automatically restart system services.
The command should not be issued during normal operating
hours.

=======================================================
Note: Please verify that the new hostname is a unique
name across the cluster and, if DNS services are
utilized, any DNS configuration is completed
before proceeding.
=======================================================

Security Warning : This operation will regenerate
all CUCM Certificates including any third party
signed Certificates that have been uploaded.

Enter the hostname:: app-lfwelty5
Would you like to change the network ip address at this time [yes]::


Warning: Do not close this window until command finishes.



ctrl-c: To quit the input.



*** W A R N I N G ***
=======================================================
Note: Please verify that the new ip address is unique
across the cluster.
=======================================================

Enter the ip address:: 106.1.34.154
Enter the ip subnet mask:: 255.0.0.0
Enter the ip address of the gateway:: 106.1.1.1
Hostname: app-lfwelty5
IP Address: 106.1.34.154
IP Subnet Mask: 255.0.0.0
Gateway: 106.1.1.1

Do you want to continue [yes/no]? yes
...

Note	The administrator can change both the hostname and IP address by responding yes. To change just the hostname, respond no.

This command sets the IP address for Ethernet interface 0. You cannot configure Ethernet interface 1.

Command Syntax

set network ip eth0 ip-address ip-mask

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command sets the ip_conntrack_max value.

Command Syntax

set network max_ip_conntrack ip_conntrack_max

Syntax Description

This command sets the maximum MTU value.

Command Syntax

set network mtu mtu_max

Syntax Description

Requirements

Level privilege: 1

Command privilege: 1

Allowed during upgrade: No

Example

admin:set network mtu 576          ***   W A R N I N G   ***
This will cause the system to temporarily lose network connectivity

          Do you want to continue?

Enter "yes" to continue or any other key to abort

yes
executing...

This command sets the properties of the Ethernet interface 0. You cannot configure Ethernet interface 1.

Command Syntax

set network nic eth0{auto{ en | dis}} {speed | {10 | 100} } {duplex| {half | full}}

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command adds a noquery option to /etc/config file.

Command Syntax

set network ntp option noquery

This command enables and disables path MTU discovery.

Command Syntax

set network pmtud{enable | disable}

Syntax Description

Requirements

Level privilege: 1

Command privilege: 1

Allowed during upgrade: No

Example

This example runs the set network pmtud command.

admin:set network pmtud enable          
***   W A R N I N G   ***
This will cause the system to temporarily lose network connectivity

          Do you want to continue?

Enter "yes" to continue or any other key to abort
yes
executing...
admin:

This command configures the specified Ethernet port to use a specified static IP address.

Caution

Only use this command option if you cannot restore network connectivity using any other set network commands. This command deletes all previous network settings for the specified network interface, including network fault tolerance. After running this command, you must restore your previous network configuration manually.

Caution

The server temporarily loses network connectivity when you use this command.

Command Syntax

set network restore eth0 ip-address network-mask gateway

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command sets the status of Ethernet 0 to up or down. You cannot configure Ethernet interface 1.

Command Syntax

set network status eth0 {up | down}

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command allows you to change the administrator password.

Command Syntax

set password {admin | security}

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command modifies the value of minimum password age for OS admin accounts in days.

Command Syntax

set password age minimum days

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command modifies the value of maximum password age for Emergency Responder OS administration accounts in days.

Command Syntax

set password age maximum days

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command disables password complexity. Changes take effect only at the next password change.

When disabled, the password created or changed after executing the command is no longer strong. The password does not need uppercase, lowercase, digit and special characters.

Command Syntax

set password complexity character disable

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command enables password complexity rules for the type of characters in a password.

Command Syntax

set password complexity character enable

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command modifies the value of minimum password length for Unified CM OS accounts.

Command Syntax

set password complexity minimum-length length

Syntax Description

Useage Guidelines

Acceptable values should be equal to or greater than 6. Use this command only after enabling the character complexity of passwords.

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command enables or disables the password expiry maximum age settings for Cisco Unified Operating System Administrator accounts.

Command Syntax

set password expiry maximum-age {enable| disable}

Syntax Description

This command enables minimum password expiry for OS accounts.

Command Syntax

set password expiry minimum-age enable.

This command is used to disable minimum password aging for OS accounts.

This means passwords for OS admin accounts can be changed at any interval.

Command Syntax

set password expiry minimum-age disable

This command disables password expiry for a particular OS account.

Command Syntax

set password expiry user maximum-age disable userid

Syntax Description

This command enables maximum password expiry for a particular OS account.

Command Syntax

set password expiry user maximum-age enable userid

Syntax Description

This command disables minimum password age settings for a particular OS account.

Command Syntax

set password expiry user minimum-age disable userid

Syntax Description

This command enables minimum password age for a particular OS account.

Command Syntax

set password expiry user minimum-age enable userid

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command sets the number of passwords to maintain in history.

Command Syntax

set password history number

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command disables the password inactivity for the OS accounts.

Command Syntax

set password inactivity disable

Command Syntax

This command enables the password inactivity for the OS accounts with the default value set as 10 days.

set password inactivity enable

This command sets the password inactivity for the OS accounts with the configured value.

Command Syntax

set password inactivity period days

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This commands sets a new administration password.

Command Syntax

set password user admin

Example

This example runs the set password user admin command:

set password user admin
Please enter the old password :********
Please enter the new password:********
re-enter new password to confirm:********
		
		

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command sets a new platform security password.

Command Syntax

set password user security

Example

This example runs the set password user security command:

set password user security
Please enter the password:********
re-enter the password to confirm: ********
		
		
		

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command sets the upper limit for concurrent sessions.

Command Syntax

set session maxlimit [value]

Syntax Description

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command sets the SMTP server hostname.

Command Syntax

set smtp hostname

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: No

This command changes the system time zone.

Command Syntax

set timezone timezone

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: No

Example

This example sets the time zone to Pacific time:

set timezone Pac

This command sets the minimum version of Transport Layer Security (TLS) protocol.

Note	The system automatically restarts after you set the minimum TLS version. You need to configure the minimum TLS version for each node.

Command Syntax

set tls min-version tls minVersion

Syntax Description

Example

admin: set tls min-version 1.1 

This command results in setting the minimum TLS version to 1.1 to all secured interfaces. If you have custom applications that make secure connection to the system, then make sure the applications support the TLS version that you have selected to configure. See Cisco Unified Reporting Administration Guide to make sure the endpoints in your deployment support this feature.

Warning

This will set the minimum TLS to 1.1 and the server will reboot.

Do you want to continue (Yes or No)? Yes

The minimum TLS version is set to 1.1 successfully.

The system restarts in few minutes.

This command sets the number of seconds after which the TLS resumption will not work and the sessions will be invalid.

Command Syntax

set tls resumption-timeout set tls resumption-timeout

Syntax Description

From the release 12.0 onwards, you can enable or disable the TLS tracing for services. Currently, Tomcat is the only supported device. You can use the CLI commands to view the reasons of connection failure of TLS connections to Cisco Emergency Responder.

This command sets trace activity for the specified task.

Command Syntax

set trace{enable Error| enable Special| enable State_Transition| enable Significant| enable Entry_exit| enable Arbitrary| enable Detailed| disable} tname

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command sets the web security certificate information for the operating system.

Command Syntax

set web-security orgunit orgname locality state [country] [alternate-host-name]

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: No

This command sets the maximum limit for concurrent web application sessions per user. This applies to the following interfaces:

• Cisco Unified Operating System Administration

• Disaster Recovery System

For the session maximum limit setting to become effective, the administrator must restart the Cisco Tomcat service.

Note	Restarting the Cisco Tomcat service ends all active sessions and can affect the system performance. We recommend that you only execute this command during off-peak traffic hours.

Note	This setting gets preserved through a software upgrade and does not get reset to the default value.

Command Syntax

set webapp session maxlimit number

Syntax Description

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 4

Allowed during upgrade: No

This command sets a timeout period for the web application session of Cisco Emergency Responder and logs off the user on expiry.

For the new webapp session timeout setting to become effective, you must restart the Cisco Tomcat service. Until you restart the Cisco Tomcat service, the show webapp session timeout command reflects the new values, but system continues to use and reflect the old values. This command prompts you to restart the service.

Caution

Restarting the Cisco Tomcat service ends all active sessions and can affect system performance. Cisco recommends that you only execute this command during off-peak traffic hours.

Note	This setting gets preserved through a software upgrade and does not get reset to the default value.

Command Syntax

set webapp session timeout minutes

Syntax Description

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command sets the working directory for active, inactive, and installation logs.

Command Syntax

set workingdir {activelog| inactivelog| install} directory

Syntax Description

Requirements

Command privilege level: 0 for logs

Allowed during upgrade: Yes

This command lists current administrator accounts, except the master administrator account.

Command Syntax

show account

Requirements

Command privilege level: 4

Allowed during upgrade: Yes

This command displays certificate contents and certificate trust lists.

Command Syntax

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Example

This command displays own certificate trust lists:

show cert list own

This command displays the status of the automatic CLI pagination.

Command Syntax

show cli pagination

Requirements

Level privilege: 0

Command privilege: 0

Allowed during upgrade: Yes

Example

The following example runs the show cli pagination command:

admin: show cli paginationAutomatic Pagination: Off.

This command displays the CLI session timeout value, which is the amount of time, in minutes, that can elapse before a CLI session times out and disconnects.

Command Syntax

show cli session timeout

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays the selected CSR file.

Command Syntax

show csr list type

Example

This example runs a show csr list command:

show csr list own
		

tomcat/tomcat.csr
		

Vipr-QuetzalCoatl/Vipr-QuetzalCoatl.csr
		

This command displays the contents of the Certificate Trust List (CTL) file on the server, and it notifies you if the CTL is not valid.

Command Syntax

show ctl

This command shows the system date.

Command Syntax

show date

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays information about disk usage on the server.

Command Syntax

show diskusage activelog {activelog| common| inactivelog| install| tmp} filename filename {directory | sort}

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays the current DSCP traffic markings on all the ports. It displays the DSCP markings in decimal and hexidecimal. If the value corresponds to a class then it displays the correct class. If the value does not correspond to a class, then it displays N/A.

Command Syntax

show dscp all

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 0

Allowed during upgrade: No

This command displays the default factory DSCP settings. These values take effect if the set dscp defaults command is executed.

Command Syntax

show dscp defaults

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 0

Allowed during upgrade: No

This command displays the current DSCP traffic markings for a particular DSCP value.

Command Syntax

show dscp marking value

Syntax Description

Useage Guidelines

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays the current DSCP traffic markings.

Command Syntax

show dscp status {enabled|disabled}

Syntax Description

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 0

Allowed during upgrade: No

This command displays information about the server hardware.

Command Syntax

show environment {fans |power-supply |temperatures}

Syntax Description

This command displays the following information about the platform hardware.

Command Syntax

show hardware

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays information about IPsec policies and associations.

Command Syntax

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: yes

Example

This example displays IPsec policies:

show ipsec policy

This command displays the details about smart licensing status, entitlements in use, product information, and smart agent version.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays the overall smart licensing status along with the failure reasons, if any.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays the overall smart licensing status and license usage.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays all information that aids in debugging smart agent.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command dumps the content of smart agent-related logs to the console.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays the product information or all members in the Unique Device Identifier (UDI) structure that are not NULL.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays the details of entitlements or licenses that are in use.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays recent logins to the server.

Command Syntax

show logins number

Syntax Description

This command displays information about the server memory.

Command Syntax

show memory{count| module[ALL | module_number]| size}

Syntax Description

This command displays information about the current account.

Command Syntax

show myself

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays network information.

Command Syntax

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Example

This example displays active Internet connections:

show network status

This command lists nodes in the network cluster.

Command Syntax

show network cluster

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays the list of ports that have been requested to be opened or translated in the firewall.

Command Syntax

ipprefs {all| enabled| public}

Syntax Description

Requirements

Level privilege: 0

Command privilege: 0

Allowed during upgrade: Yes

Example

The following example shows show the network ipprefs command:

admin:show network ipprefs public 
Application IPProtocol PortValue  Type       XlatedPort Status   Description  
----------- ---------- ---------- ---------- ---------- -------- ------------ 
sshd         tcp       22         public     -          enabled  sftp and ssh access 
tomcat       tcp       8443       translated 443        enabled  secure web access 
tomcat       tcp       8080       translated 80         enabled  web access   
clm          udp       8500       public     -          enabled  cluster manager 
clm          tcp       8500       public     -          enabled  cluster manager 
ntpd         udp       123        public     -          enabled  network time sync 
snmpdm       udp       161        public     -          enabled  SNMP         
ccm          tcp       2000       public     -          enabled  SCCP-SIG     
ctftp        udp       6969       translated 69         enabled  TFTP access to CUCM TFTP Server 
ctftp        tcp       6970       public     -          enabled  HTTP access to CUCM TFTP Server
admin:

This command adds a noquery option to /etc/config file.

Command Syntax

set network ntp option noquery

This command displays open files and ports on the system.

Syntax Description

Syntax Description

This command displays the name and version for installed packages.

Command Syntax

show packages{active| inactive} name [page]

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays the configured password expiration parameters.

Command Syntax

show password expiry maximum-age

This command displays the configured password expiration parameters.

Command Syntax

show password expiry minimum-age

This command displays the configured password expiration parameters for a particular OS user.

Command Syntax

show password expiry user maximum-age userid

This command displays the configured password expiration parameters for a particular OS user.

Command Syntax

show password expiry user minimum-age userid

This command displays the number of passwords that are maintained in the history for OS admin accounts.

Command Syntax

show password history

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays the status of the password inactivity for OS accounts.

Password inactivity is the number of days of inactivity after a password has expired before the account is disabled.

Command Syntax

show password inactivity

Example

show password inactivity
Password Inactivity: Enabled and is currently set to 10
		  days
		
		

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays information about processes running on the system.

Syntax

Syntax Description

This command shows the upper limit for concurrent SSH sessions.

Command Syntax

show session maxlimit

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays the name of the SMTP host.

Command Syntax

show snmp

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays system I/O statistics.

Command Syntax

show stats io [kilo] [detail] [page] [file filename]

Syntax Description

Useage Guidelines

platform/cli/filename.txt.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays basic platform status.

Command Syntax

show status

Requirements

Command privilege level: 0

This command displays the combined output of all show tech commands.

Command Syntax

show tech all [page] [file filename]

Syntax Description

Useage Guidelines

platform/cli/filename.txt.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command creates a CSV file of the entire database.

Command Syntax

show tech database {dump| sessions}

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command creates a CSV file of the entire database.

Command Syntax

show tech database dump

This command displays the database integrity.

Command Syntax

show tech dbintegrity

This command displays the database in use.

Command Syntax

show tech dbinuse

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays the database schema in a CSV file.

Command Syntax

show tech dbschema

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays the state of the database.

Command Syntax

show tech dbstateinfo

This command displays network aspects of the server.

Command Syntax

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays all preferences files for Emergency Responder and its database.

Command Syntax

show tech prefs

This command displays server runtime.

Command Syntax

show tech runtime {all | cpu| disk| env| memory} [page] [file filename]

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays the name of all tables in the sysmaster database.

Command Syntax

show tech systables

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays the system aspects of the server.

Command Syntax

show tech system {all| bus| hardware| host| kernel| software| tools} [page] [file filename]

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays the contents of the specified database table.

Command Syntax

show tech table table_name [page] [csv]

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays the version of the installed components.

Command Syntax

show tech version [page]

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command displays time zone information.

Command Syntax

show timezone{config| list [page] }

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command shows the status of TLS trace for a service.

Command Syntax

show tls trace service

Syntax Description

This command shows the minimum configured version of Transport Layer Security (TLS) protocol.

Command Syntax

show tls min-version

Example

admin:show tls min-version

The configured TLS minimum version is 1.0.

This command shows the TLS session resumption timeout.

Command Syntax

show tls resumption-timeout

This command displays trace information for a particular task.

Command Syntax

show trace [task_name]

Syntax Description

Useage Guidelines

If you do not enter any parameters, the command returns a list of available tasks.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Example

This example displays trace information for CDP.

show trace cdps

This command shows the current status of the USB-connected APC smart-UPS device and starts the monitoring service if not already started.

Command Syntax

show ups status

This command displays the software version on the active or inactive partition.

Command Syntax

show version {active| inactive}

Syntax Description

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays the webapp session timeout value, which is the amount of time, in minutes, that can elapse before a web application times out and logs off the user.

Command Syntax

show webapp session timeout

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command displays the contents of the current web-security certificate.

Command Syntax

show web-security

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command retrieves the current working directory for activelog, inactivelog, install, and TFTP.

Command Syntax

show workingdir

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

This command allows you to disable IPsec policies and associations.

Command Syntax

Syntax Description

Requirements

Command privilege level: 1

Allowed during upgrade: No

This command unsets DNS options.

Command Syntax

unset network dns options [timeout] [attempts] [rotate]

Syntax Description

This command unsets the domain name and restarts the server.

Command Syntax

unset network domain

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command starts, stops, and provides the status of the system auditing service.

Command Syntax

utils auditd{enable|disable|status}

Syntax Description

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Useage Guidelines

After the service has been enabled, it monitors and logs activity on the system. Be aware that the system auditing service logs a lot of information. Care must be taken not to overfill the disk.

This command lists all existing core files.

Command Syntax

utils core{active| inactive} list

This command generates a backtrace for the specified core file, a thread list, and the current value of all CPU registers.

Command Syntax

utils core analyze core file name

Syntax Description

This command creates reports about the server in the platform or log directory.

Command Syntax

utils create report {hardware| platform| csa}

Syntax Description

Requirements

Level privilege: 1

Command privilege level: 0

Allowed during upgrade: Yes

Collects all log files needed for database troubleshooting.

Command Syntax

Utils create report database.

Example

admin:utils create report database 
Created /var/log/active/cm/log/informix/[hostname]_db_report_Oct_27_11_13_10 for log collection...
Collecting database logs, please be patient...
Collecting message logs (ccm.log) and assert failure files (af files)...
Collecting ris and ats files...
Collecting DB Replication logs...
Collecting DB install logs...
Collecting dblrpc and dbmon logs...
Collecting CDR information...
COMPLETED! Database report created successfully...
To retrieve the [hostname]_db_report_Oct_27_11_13_10.tar, use CLI command: 
  file get activelog cm/log/informix/[hostname]_db_report_Oct_27_11_13_10.tar
To delete the [hostname]_db_report_Oct_27_11_13_10.tar, use CLI command: 
  file delete activelog cm/log/informix/[hostname]_db_report_Oct_27_11_13_10.tar

This command enables secure http for UCAT service(ConfigAPI).

Command Syntax

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

This command drops the Informix syscdr database on any server in the cluster.

Command Syntax

utils dbreplication dropadmindb

Requirements

Command privilege level: 0

Allowed during upgrade: No

Applies to: Unified Communications Manager, IM and Presence service on Unified Communications Manager, Cisco Unity Connection.

This command displays the status of database replication. Use this command only on the first publisher server of a cluster.

Command Syntax

utils dbreplication status

This command stops the automatic setup of database replication. Run this command on subscriber and publisher servers before executing the CLI command utils dbreplication reset or utils dbreblication clusterreset. You can run this command on the subscriber servers simultaneously, before you run it on the publisher server.

Command Syntax

utils dbreplication stop {nodename| all}

Syntax Description

Command Mode

Administrator (admin:)

Requirements

Command privilege level: 0

Allowed during upgrade: No

This command repairs database replication.

Command Syntax

utils dbreplication repair

This command resets and restarts database replication.

Command Syntax

utils dbreplication reset

This command enables you to diagnose and attempt to automatically fix system problems.

Command Syntax

utils diagnose {fix| list| module| test| version} [module_name]