Cisco Virtualized Video Processing Controller User Guide - Release 3.3.5

Creating Workers in Bulk

---

This chapter provides instructions for creating workers in bulk through the V2PC GUI.

Prerequisites

• The user has bootstrapped the V2PC cluster from the launcher node.
• The user has created the provider, network, and zone from the V2PC GUI.

Procedure

Step 1 From the navigation menu, choose Application Deployment Manager > Resources > Nodes. The Nodes page opens.

Figure 11-1 Nodes Page

Step 2 Click the Add (+) icon to add one or more worker nodes. The Bulk Nodes Creation dialog opens.

Figure 11-2 Bulk Nodes Creation Dialog

Step 3 Enter the number of nodes and other information as needed:

• Number of nodes – Enter number of nodes
• Region – Select Region Name
• Provider – Select Provider Name
• Zone – Select Zone
• Description – Enter Description
• Image Tag – Select Image
• Image Flavor – Select Image Flavor
• Flavor Name – Select Image Flavor Name

Step 4 Enter the IP addresses for the management and data interfaces:

• Management – Select Network and enter IP Address Start Range
• Data In – Select Network and enter IP Address Start Range
• Data Out – Select Network and enter IP Address Start Range

Step 5 Click Create. The GUI automatically configures each node and assigns a sequential IP address.

Note All nodes are created in the configured zone.

A popup window displays the status of the node creation process.

Figure 11-3 Node Creation Status Window