Applicable Standards and Notices
The D9800 Network Transport Receiver has been approved for safety to the requirements the Standards Council of Canada and OHSA (NRTL) to the following standards:
CAN/CSA 60065:16 - Audio, Video and Similar Electronic Apparatus - Safety Requirements
UL Std No. 60065-2015 - Audio, Video and Similar Electronic Apparatus - Safety Requirements
Also, this product has been evaluated under the IECEE CB scheme to the following international standard:
IEC 60065:2014; IEC 60065:2001, IEC 60065:2001/AMD1:2005, IEC 60065:2001/AMD2:2010. Compliance with the National requirements of AR, AU, CA, CH CN, DE, DK, FI, GB, IE, IL, IT, JP, KR, MY NO, PL, SE, SG, UA, US and Group Differences (AT, BE, CZ, ES, FR, HU, NL, SK and as given in the CB Bulletin).
Electrostatic Discharge (ESD) results from the static electricity buildup on the human body and other objects. This static discharge can degrade components and cause failures.
Take the following precautions against electrostatic discharge.
Use an anti-static bench mat and a wrist strap or ankle strap designed to safely ground ESD potentials through a resistive element.
Keep components in their anti-static packaging until installed.
Avoid touching electronic components when installing a module.
Electromagnetic Compatibility Regulatory Requirements
Ethernet cables should be of single-shielded or double-shielded type. Coaxial cables should be of the double-braided shielded type. Where this equipment is subject to USA FCC and/or Industry Canada rules, the following statements apply:
Reorient or relocate the television receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an AC outlet on a circuit different from that to which the receiver is connected.
Contact your dealer/ reseller or an experienced radio/ TV technician for help.
The user may find the booklet “Interference handbook” prepared by the Federal Communications Commission helpful. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, stock no. 004-000-00450-7.
Shielded cables should be used to interconnect this device with any other/peripheral equipment (for example, data sources, terminals, monitors, and so on) to ensure compliance with Class B limits. Failure to do so may result in radio or TV interference. Cables should be of braided shield construction with metal end shells.
Industry Canada Notice
This digital apparatus does not exceed the limits for Class B radio noise emissions from digital apparatus as set out in the radio interference regulations of the Industry Canada.
Le present appareil numerique n’emet pas de bruites radioelectriques qui dépassant les limites applicables aux appareils numeriques de Class B prescrites dans le reglement sur le brouillage radioelectrique edicte par Industrie Canada.
The manufacturer is not responsible for any radio or TV interference resulting from unauthorized modifications made to this equipment. It is the responsibility of the user to correct such interference at his own expense.