The Failover feature allows you to configure Cisco Show and Share and Cisco Digital Media Manager (DMM) appliances so that one will take over operation if the other one fails.
A Cisco Show and Share failover configuration requires the following devices:
- A primary and a secondary Cisco Show and Share appliance.
- A primary and a secondary Cisco DMM appliance.
Note You cannot configure failover for only the Cisco Show and Share appliance; you must configure it for both the Cisco Show and Share and the Cisco DMM appliances.
To configure failover for Cisco Show and Share, refer to the Failover Configuration Guide for Cisco Digital Media Suite Release 5.5 and 5.6 on Cisco.com:
Note Configuring Digital Signs Failover on a DMM running Release 5.6 is not supported.