|
|
|
|
|
|
/proc/calypso/cm/active_trickspeed_0 |
Read |
Tunable used to read the configured trick speed, which is configured from CDSM |
Speed/Hex |
default 0 |
/proc/calypso/cm/active_trickspeed_1 |
Read |
Tunable used to read the configured trick speed, which is configured from CDSM |
Speed/Hex |
default 0 |
/proc/calypso/cm/active_trickspeed_2 |
Read |
Tunable used to read the configured trick speed, which is configured from CDSM |
Speed/Hex |
default 0 |
/proc/calypso/cm/active_trickspeed_3 |
Read |
Tunable used to read the configured trick speed, which is configured from CDSM |
Speed/Hex |
default 0 |
/proc/calypso/cm/active_trickspeed_4 |
Read |
Tunable used to read the configured trick speed, which is configured from CDSM |
Speed/Hex |
default 0 |
/proc/calypso/cm/active_trickspeed_5 |
Read |
Tunable used to read the configured trick speed, which is configured from CDSM |
Speed/Hex |
default 0 |
/proc/calypso/cm/active_trickspeed_6 |
Read |
Tunable used to read the configured trick speed, which is configured from CDSM |
Speed/Hex |
default 0 |
/proc/calypso/cm/active_trickspeed_7 |
Read |
Tunable used to read the configured trick speed, which is configured from CDSM |
Speed/Hex |
default 0 |
/proc/calypso/cm/active_trickspeed_8 |
Read |
Tunable used to read the configured trick speed, which is configured from CDSM |
Speed/Hex |
default 0 |
/proc/calypso/cm/active_trickspeed_9 |
Read |
Tunable used to read the configured trick speed, which is configured from CDSM |
Speed/Hex |
default 0 |
/proc/calypso/cm/active_trickspeed_10 |
Read |
Tunable used to read the configured trick speed, which is configured from CDSM |
Speed/Hex |
default 0 |
/proc/calypso/cm/active_trickspeed_11 |
Read |
Tunable used to read the configured trick speed, which is configured from CDSM |
Speed/Hex |
default 0 |
/proc/calypso/test/arp_readroutingtable |
Write |
Tunable used to read entries from RoutingTable and update. Any change in routing table, we need to do "echo 1 > /proc/calypso/test/arp_readroutingtable" for the new entry to take effect |
bool |
default 0 |
/proc/calypso/test/readarptable |
Write |
Tunable used to read the configuration file /arroyo/test/ArpTable entires and update. Any change in Arp table, we need to do "echo 1 > /proc/calypso/test/readarptable" for the new entry to take effect |
bool |
default 0 |
/proc/calypso/test/readfillsourceconfig |
Write |
Tunable used to read the configuration file /arroyo/test/FillSourceConfig entires and update. Any change in FillSourceConfig, we need to do "echo 1 >/proc/calypso/test/readfillsourceconfig" for the new entry to take effect |
bool |
default 0 |
/proc/calypso/test/readrecordingchannelmap |
Write |
Tunable used to read the configuration file /arroyo/test/RecordingChannelMap entires and update. Any change in RecordingChannelMap, we need to do "echo 1 >/proc/calypso/test/readrecordingchannelmap" for the new entry to take effect |
bool |
default 0 |
/proc/calypso/test/readremoteservers |
Write |
Tunable used to read the configuration file /arroyo/test/RemoteServers entires and update. Any change in RemoteServers file, we need to do "echo 1 >/proc/calypso/test/readremoteservers" for the new entry to take effect |
bool |
default 0 |
/proc/calypso/test/readstreamdestinationmap |
Write |
Tunable used to read the configuration file /arroyo/test/StreamDestinationMap entires and update. Any change in RemoteServers file, we need to do "echo 1 >/proc/calypso/test/readstreamdestinationmap" for the new entry to take effect |
bool |
default 0 |
/proc/calypso/test/readsubnettable |
Write |
Tunable used to read the configuration file /arroyo/test/SubnetTable entires and update. Any change in SubnetTable, we need to do "echo 1 >/proc/calypso/test/readsubnettable" for the new entry to take effect |
bool |
default 0 |
/proc/calypso/test/readtgidtable |
Write |
Tunable used to read the configuration file /arroyo/test/TransportGroupIdTable entires and update. Any change in TransportGroupIdTable, we need to do "echo 1 >/proc/calypso/test/readsubnettable" for the new entry to take effect. We are not using it now. |
bool |
default 0 |
/proc/calypso/test/shutdown |
Write |
Tunable used to shut down Cserver module processes |
Bool |
default 0 |
/proc/calypso/tunables/trickspeed_0 |
Write |
Tunable used to set both +ve and -ve trick speed as pair. Since this tunable does not have directional information, we can't have different +ve and -ve speed. This is older verison tunable |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeed_1 |
Write |
Tunable used to set both +ve and -ve trick speed as pair. Since this tunable does not have directional information, we can't have different +ve and -ve speed. This is older verison tunable |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeed_2 |
Write |
Tunable used to set both +ve and -ve trick speed as pair. Since this tunable does not have directional information, we can't have different +ve and -ve speed. This is older verison tunable |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeedv2_0 |
Write |
Tunable used to set trick speed (+ve or -ve) |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeedv2_1 |
Write |
Tunable used to set trick speed (+ve or -ve) |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeedv2_2 |
Write |
Tunable used to set trick speed (+ve or -ve) |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeedv2_3 |
Write |
Tunable used to set trick speed (+ve or -ve) |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeedv2_4 |
Write |
Tunable used to set trick speed (+ve or -ve) |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeedv2_5 |
Write |
Tunable used to set trick speed (+ve or -ve) |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeedv2_6 |
Write |
Tunable used to set trick speed (+ve or -ve) |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeedv2_7 |
Write |
Tunable used to set trick speed (+ve or -ve) |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeedv2_8 |
Write |
Tunable used to set trick speed (+ve or -ve) |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeedv2_9 |
Write |
Tunable used to set trick speed (+ve or -ve) |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeedv2_10 |
Write |
Tunable used to set trick speed (+ve or -ve) |
Speed/Hex |
default -1 |
/proc/calypso/tunables/trickspeedv2_11 |
Write |
Tunable used to set trick speed (+ve or -ve) |
Speed/Hex |
default -1 |
/proc/calypso/tunables/stream_null_packets |
Write |
Tunable used to enable/disable the stream null packet logic at the remaining length. It fills the remaining length with null packets while adding the stream data in stream slot |
bool |
default 1 |
/proc/calypso/tunables/stream_using_qam |
Write |
Tunable used to configure the setup, whether QAM or IP setup. If flag is not set then its IP setup and Motorola PreEncryption use original program number for Encyrption data (Inband).
If flag is set then its QAM based setup and Motorola pre Encryption refer program number and data from port (outband). |
bool |
default 1 |
/proc/calypso/tunables/bwm_readConfFile |
Write |
Tunable used to read the configuration file /arroyo/test/BandwidthManager entires and update. Any change in Bandwidth manager cofiguration, we need to do "echo 1 >/proc/calypso/tunables/bwm_readConfFile" for the new entry to take effect |
bool |
default 0 |
/proc/calypso/tunables/cm_playnowatlivepoint |
Write |
Tunable used to enable/disable the play at live point. When the tunable is enabled, it allows to play at live point. |
bool |
default 1 |
/proc/calypso/tunables/convert_npt_using_pts |
Write |
Usually play npt computation is based offset information, but using this tunable we could improve the accuracy. With tunable enable, the npt computation uses actual frame pts information, which improves the accuracy. |
bool |
default 1 |
/proc/calypso/tunables/disable_fade_frame |
Write |
Tunable used to enable/disable the frame fading option at the file transition. When it enabled, there is no extra fade frame getting inserted at file transition. But when its disabled, there are 4 fade frames are getting inserted at the splice point. |
bool |
default 0 |
/proc/calypso/tunables/ftpoutmaxrate |
|
Tunable used to confgure the ftpmax rate for total active ftp sessions |
Hex/bps |
default 19000000 |
/proc/calypso/tunables/ftpoutmaxsessions |
Write |
Tunable used to confgure the number of ftpsessions |
no of session/Hex |
default 0 |
/proc/calypso/tunables/popularity_half_life |
Read |
Tunable used to denote how often cserver play the content. The value set in popularity_half_life will determine the rate of increase of the bump-on-play value. The bump-on-play value is managed by the class BumpOnUse, which resides in cm/PopularityValue. Set via CDSM |
Sec/Hex |
default A880 |
/proc/calypso/tunables/read_etc_hosts |
Write |
Tunable used to read the etc hosts from /etc/hosts |
bool |
default 1 |
/proc/calypso/tunables/pipe_add |
Write |
Tunable used to add the new pipe with any reboot |
Pipe format |
default empty |
/proc/calypso/tunables/pipe_del |
Write |
Tunable used to delete the existing pipe |
Pipe id |
default empty |
/proc/calypso/tunables/pipe_modify |
Write |
Tunable used to modify the existing pipe configuration |
Pipe format |
default empty |
/proc/calypso/tunables/stream_from_local_array |
write |
Tunable used to enable to streamthe content from local server. This tunable specifically to control server |
bool |
default 0 |
/proc/calypso/tunables/vaultdecommission |
write |
Tunable used to decommission the vault. Since vault has been removed, it migrate all the information with other vault.Also It logs the status under decommission information |
bool |
default 0 |
/proc/calypso/tunables/vaultmirrorcopies |
Read |
It will be read from setup file, Used to Make the Number of Mirror Copies needs to be present on the site |
Number of copies |
default 2 |
/proc/calypso/tunables/bwm_updateInterval |
Write |
It decides the time interval at which the Bandwidth management updates are exchanged by server where servers report their bandwidth usage to primary and primary assigns bandwidth to other servers. When committed bandwidth out of bandwidth also it reports the BWM (happen two levels, first at 90% and then second time at 95%) |
in sec |
default 10 |
/proc/calypso/internal/offline |
Write |
Tunable used to offline the server, when its set server become offline. |
bool |
default 0 |
/proc/calypso/tunables/bPSIErrorFailsIngest |
RW |
It will make sure that trick code aborts the ingest when bitstream don't have PAT,PMT |
Boolean |
default TRUE |
/proc/calypso/tunables/bRateErrorFailsIngest |
RW |
If it is enabled, Ingest fails if Bitrate cannot be computed. |
Boolean |
default TRUE |
/proc/calypso/tunables/nCCErrorsFailIngest |
RW |
Controls number of CC errors allowed after which Ingest is marked failed |
Number |
None |
/proc/calypso/tunables/nDiscErrorsFailIngest |
RW |
Number of disconinuity errors allowed after which ingest is marked failied |
Number |
None |
/proc/calypso/tunables/nPicGapsFailIngest |
RW |
Number of PicGaps after which we fail ingest |
Number |
3 |
/proc/calypso/tunables/nPicGapsinHSFailIngest |
RW |
Amount of time in Hundredth of second in pic Gap which is considerd as ingest failure |
Time in hundredth of seconds |
5 (seconds) |
/proc/calypso/tunables/nSyncLossesFailIngest |
RW |
Number of synclosses after which we fail ingest |
Number |
3 |
/proc/calypso/tunables/nSyncLossesinHSFailIngest |
RW |
Amount of time in Hundredth of second in SyncLoss which is considerd as ingest failure |
Time in hundredth of seconds |
5 (seconds) |
/proc/calypso/tunables/maintenancemirrorcopies |
RW |
No of copies for mirroring during server maintenance |
number |
2 |
/proc/calypso/tunables/enable_rtp_rtx |
RW |
Enables VOD error repair feature with RTP RTX |
Boolean |
default 0 Range 0,1 |
/proc/calypso/tunables/nEveryNMinutes |
RW |
to allow ingestion depending on the ingestknob settings such as a check on the error counts of sample based on time speficied |
Minutes |
30 |
/proc/calypso/tunables/tm_restrict_enable_ffw_resume |
Write |
This tunable used to enable/disable the streamer to resume the Fast forward after playing a Fast forward trick restricted content in 1x. |
bool |
default false |
/proc/calypso/tunables/tm_restrict_enable_forward_jump |
Write |
tunable used to Disable/Enable the forward jump restriction |
bool |
default false |
/proc/calypso/tunables/tm_restrict_enable_forward_jump_resume |
Write |
tunable used to enable/disable the streamer to resume the forward jump after playing a forward jump restricted content in 1x |
bool |
default false |
/proc/calypso/tunables/tm_restrict_enable_rewind_skip |
Write |
Tunable used to enable/disable the rewind skip. If it enable then rewind jump to the beginning of the restricted content and continue rewinding from there |
bool |
default false |
/proc/calypso/tunables/vaultarraymirror |
Write |
This tunable used to Configure mirror partner, array id to which the server is mirroring. To stop the array mirroring we need to echo negative value of the partner array id |
array id |
default 1 |
/proc/calypso/cm/active_maxpacketsize |
Read |
Active Max packet size to be sent out on their streaming network |
Packet Size |
7 MPEG Cells for Standard Size packets, 21 MPEG Cells for Jumbo size packets |
/proc/calypso/tunables/vaultlocalcopycount |
RW |
To configure the number of local mirror copy count on Mirroring Policy |
count |
1 |
/proc/calypso/tunables/maintenancearraymirroringallowed |
RW |
To enable the array mirroring during the maintenance |
functionality (enable/disable) |
TRUE |
/proc/calypso/internal/cm_defaultGoidType |
RW |
To enable chunk GOID support |
Number |
0 – Default Value 2 – To enable GOID chunking |
/proc/calypso/tunables/enable_Role_Failover_DbDown |
RW |
To enable/disable the role fail over support on DB connectivity loss in the streamers. |
Number |
1 |
/proc/calypso/tunables/db_connectivity_retries_check_count |
RW |
To set the number of retries before confirming the DB connectivity loss in the streamers. |
Number |
30 |
/proc/calypso/tunables/streamPFramesDuringPause |
RW |
Tunable set on streamer to stream dummy P-frames and maintain a constant bit rate on issuing a pause in the STB |
Number |
0 |
/proc/calypso/tunables/streamPCRDuringPause |
RW |
Tunable set on streamer to stream PCR packet at less than 100msec interval along with null packets and maintain a constant bit rate on issuing a pause in the STB. |
Number |
0 |
/proc/calypso/tunables/atis_cache_fill_chunk_size_in_sec |
RW |
Tunable to set the chunk duration for ATIS cache fill in seconds |
Number |
0 |
Feedback