Cisco GS7000 Super High Output Intelligent Node Software Installation and Configuration Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 21, 2018

Chapter: Troubleshooting

Troubleshooting

Table 1 Troubleshooting Table
Problem	Solution
LCS can not connect	Go to the dashboard page and check the USB icon. If it is red, touch it to reconnect. If the USB icon does not turn green in a reasonable time, restart the iNode App.
Auto Setup fails	Verify the RF configuration settings.
Software can not update	See Download Does Not Start.
Alarms	The information regarding alarms can be found in: Alarms Alarms and Status Analog Property Table, Current Alarm Table Sample and SCTE-HMS-ALARMS-MIB

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)