Caveats

Open Caveats Intelligent Node 2.0.9

Caveat ID Number

Description

CSCvm49036

Spectrum graph incomplete if back button is used in landscape mode.

CSCvm50320

Inode rev spectrum noise floor for 204/258 split node shows better than actual below 42 MHz

CSCvo83889

With SLAAC IPv6, software upgrades occur automatically with registration

CSCvo92045

SNMP Traps generated are incorrect with the currentAlarmState

CSCvp31373

LCS spectrum capture fails for certain frequency spans

Resolved Caveats Intelligent Node 2.0.9

Caveat ID Number

Description

CSCvw08518

iNode manual reset required when kernel panic happens at boot up.

CSCvw08520

If inode's time is in past, it fails to acquire ipv4 address after upgrade.

Open Caveats Intelligent Node 2.0.8

Caveat ID Number

Description

CSCvm49036

Spectrum graph incomplete if back button is used in landscape mode.

CSCvm50320

Inode rev spectrum noise floor for 204/258 split node shows better than actual below 42 MHz

CSCvo83889

With SLAAC IPv6, software upgrades occur automatically with registration

CSCvo92045

SNMP Traps generated are incorrect with the currentAlarmState

CSCvp31373

LCS spectrum capture fails for certain frequency spans

Resolved Caveats Intelligent Node 2.0.8

There are no resolved caveats for Cisco Intelligent Node 2.0.8 release.

Open Caveats Intelligent Node 2.0.7

Caveat ID Number

Description

CSCvm49036

Spectrum graph incomplete if back button is used in landscape mode.

CSCvm50320

Inode rev spectrum noise floor for 204/258 split node shows better than actual below 42 MHz

CSCvo83889

With SLAAC IPv6, software upgrades occur automatically with registration

CSCvo92045

SNMP Traps generated are incorrect with the currentAlarmState

CSCvp31373

LCS spectrum capture fails for certain frequency spans

Resolved Caveats Intelligent Node 2.0.7

Caveat ID Number

Description

CSCvs53515

With IPv6, communication between iNode and iNode mgr lost upon cbr8 or rpd reload

CSCvt35971

The string "null" is shown on the Android permission screen when launching iNode app.

CSCvt45416

iNode loses configuration after software upgrade

Open Caveats Intelligent Node 2.0.6

Caveat ID Number

Description

CSCvm49036

Spectrum graph incomplete if back button is used in landscape mode.

CSCvm50320

Inode rev spectrum noise floor for 204/258 split node shows better than actual below 42 MHz

CSCvo83889

With SLAAC IPv6, software upgrades occur automatically with registration

CSCvo92045

SNMP Traps generated are incorrect with the currentAlarmState

CSCvp31373

LCS spectrum capture fails for certain frequency spans

Resolved Caveats Intelligent Node 2.0.6

Caveat ID Number

Description

CSCvt06541

iNode will not attempt to boot after 8 successive boot failures

Open Caveats Intelligent Node 2.0.5

Caveat ID Number

Description

CSCvm49036

Spectrum graph incomplete if back button is used in landscape mode.

CSCvm50320

Inode rev spectrum noise floor for 204/258 split node shows better than actual below 42 MHz

CSCvo83889

With SLAAC IPv6, software upgrades occur automatically with registration

CSCvo92045

SNMP Traps generated are incorrect with the currentAlarmState

CSCvp31373

LCS spectrum capture fails for certain frequency spans

Resolved Caveats Intelligent Node 2.0.5

Caveat ID Number

Description

CSCvm94044

With IPv6, iNode does not re-register with iNode manager upon lease renewal

CSCvn52057

Sending 1000 SNMP traps will cause the node to reboot

CSCvn52085

Excessive ConfD audit messages are being logged.

CSCvn81465

iNode log records 3-4 messages each time iNode Manager confirms connectivity

CSCvo79520

While using SLAAC IPv6, all cronjobs stop about 30 minutes after boot

Resolved Caveats Intelligent Node 2.0.3

Caveat ID Number

Description

CSCvm54776

ipv6 address and serial number details are not fetched during the autoRegistration

Open Caveats Intelligent Node 2.0.1

Caveat ID Number

Description

CSCvi031125

Finalize support for IPv6 SLAAC.

CSCvj79087

Inconsistent IPv6 DHCP behavior after fiber disconnect.

Resolved Caveats Intelligent Node 2.0.1

Caveat ID Number

Description

CSCvj40307

Use Split info to set LCS Reverse Path Spectrum Capture Default Frequency.

CSCvj40620

Use Split info to set LCS Forward Path Spectrum Capture Default Frequency.

CSCvj47729

SNMP: Use Community String edited by User.

CSCvk76467

LCS will not connect when run on some Android phones.

CSCvm11038

Power Savings mode does not work with OFDM.

CSCvm44734

Autosetup can set the RPD input attenuator to less than 5.5 dB resulting in low MER.

Cisco Bug Search

Use the Cisco Bug Search Tool to access open and resolved bugs for a release.

The tool allows you to search for a specific bug ID, or for all bugs specific to a product and a release.

You can filter the search results by last modified date, bug status (open, resolved), severity, rating, and support cases.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation.

To receive new and revised Cisco technical content directly to your desktop, you can subscribe to the What’s New in Cisco Product Documentation RSS feed. The RSS feeds are a free service.