Skip to content
Skip to search
Skip to footer

Cisco UCS Manager System Monitoring Guide Using the CLI, Release 4.3

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: April 30, 2025

Chapter: New and Changed Information for This Release

New and Changed Information for This Release
New and Changed Information

New and Changed Information for This Release

New and Changed Information

This section provides information on new features and changed behavior in Cisco UCS Manager, Release 4.3.

Table 1. New Features and Changed Behavior in Cisco UCS Manager, Release 4.3(6a)
Feature	Description	Where Documented
Support for X-Series M8 and C-Series M8 servers	Cisco UCS Manager now supports Cisco UCS X210c M8 Compute Node, Cisco UCS C240 M8 Server, and Cisco UCS C220 M8 Server	Support for Local Storage Monitoring Graphics Card Server Support TFM and Supercap Guidelines and Limitations

Table 2. New Features and Changed Behavior in Cisco UCS Manager, Release 4.3(5a)
Feature	Description	Where Documented
Support for X-Series M8 server	Cisco UCS Manager now supports Cisco UCS X215c M8 Compute Node	Support for Local Storage Monitoring Graphics Card Server Support TFM and Supercap Guidelines and Limitations
Support for C-Series M8 server	Cisco UCS Manager now supports Cisco UCS C225 M8 Server	Support for Local Storage Monitoring Graphics Card Server Support TFM and Supercap Guidelines and Limitations
Support for monitoring port status	Cisco UCS Manager now supports dynamic polling to monitor the port status	Monitoring the Host Ethernet Interface status for a Rack-Mount Server

Table 3. New Features and Changed Behavior in Cisco UCS Manager, Release 4.3(4b)
Feature	Description	Where Documented
Support for Cisco UCS Fabric Interconnects 9108 100G	Cisco UCS Manager now supports Cisco UCS Fabric Interconnects 9108 100G (Cisco UCS X-Series Direct)	Enabling Syslog Messages to Store In a Local File NetFlow Monitoring

Table 4. New Features and Changed Behavior in Cisco UCS Manager, 4.3(4a) Release
Feature	Description	Where Documented
Traffic Monitoring	Cisco UCS Manager guidelines for configuring ERSPAN Traffic Monitoring on Cisco UCS 64108 Fabric Interconnects and Cisco UCS 6532 Fabric Interconnects.	Traffic Monitoring
PCIe Node Monitoring	PCIe node inventory monitoring	Monitoring PCIe Node

Was this Document Helpful?

Feedback

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)