EMC VNX Tasks

This chapter contains the following sections:

Add Hosts to VNX Storage Group

Summary
Add Hosts to VNX Storage Group.
Description
Add Hosts to specified VNX Storage Group
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select name of the EMC Account in this system EMC_​Account​Identity Y
Storage Group Select Storage Group emc​Storage​Group​Identity Y
Show Hosts Select Hosts Y
Hosts Connected Select Hosts to add them to Storage Group emc​Host​Identity
Hosts Not Connected Select Hosts to add them to Storage Group emc​Host​Identity Y
Outputs
Output Description Type
OUTPUT_​STORAGE_​GROUP_​INDENTITY Storage Group Identity emc​Storage​Group​Identity
OUTPUT_​HOST_​IDENTITY Host Identity emc​Host​Identity
OUTPUT_​HOST_​IDENTITY_​LIST Comma-separated hosts.​ emc​Multiple​Host​List

Add VNX CIFS Server

Summary
Add EMC VNX CIFS Server.
Description
Creates a new CIFS server on a Data Mover.
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select name of the EMC Account in this system EMC_​Account​Identity Y
Data Mover Select Mover.​ emc​Mover​Identity Y
Server Type Select Server Type.​ emc​Vnx​CIFSServer​Type​List
Computer Name Enter alternative names for the CIFS Server.​ gen_​text_​input
Net​BIOS Name Enter Net​BIOS Name.​ gen_​text_​input Y
Aliases Enter alternative names for the CIFS Server.​ gen_​text_​input
Workgroup Enter new File system name.​ gen_​text_​input Y
Domain Enter Windows domain to which the server belongs.​ gen_​text_​input Y
Join Domain Select this option to Join Domain gen_​text_​input
Domain Admin Enter Domain Admin Name gen_​text_​input Y
Domain Password Enter Domain Password gen_​text_​input Y
Organizational Unit Enter Organizational Unit gen_​text_​input Y
Enable Local Users Select this option to add Advanced Options gen_​text_​input
Set Local Admin Password Set Local Admin Password password Y
Confirm Local Admin Password Confirm Local Admin Password password Y
Interfaces Select Interfaces.​ emc​Data​Mover​Interface​Identity Y
Outputs
Output Description Type
ACCOUNT_​NAME Name of the Account on which the selected operation was performed gen_​text_​input
DATACENTER_​NAME Name of the datacenter on which the selected operation was performed gen_​text_​input
CIFS_​SERVER_​IDENTITY Name of the Account on which the selected operation was performed emc​Cifs​Server​Identity

Add VNX CIFS Share

Summary
Add EMC VNX CIFS Share.
Description
Creates a CIFS share and make an existing file system available to CIFS clients.
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select name of the EMC Account in this system EMC_​Account​Identity Y
Data Mover Select Mover.​ emc​Mover​Identity Y
File Systems File Systems emc​File​System​Identity Y
CIFS Share Name Enter Share Name gen_​text_​input Y
Path Path gen_​text_​input Y
CIFS Server CIFS Servers emc​Cifs​Server​Identity Y
User Limit User Limit gen_​text_​input
Comment Comment gen_​text_​input
Outputs
Output Description Type
ACCOUNT_​NAME Name of the Account on which the selected operation was performed gen_​text_​input
DATACENTER_​NAME Name of the datacenter on which the selected operation was performed gen_​text_​input
OUTPUT_​CIFS_​SHARE_​IDENTITY CIFS Share Identity.​ emc​Cifs​Share​Identity
CIFS_​SHARE_​NAME Name of the CIFS Share created gen_​text_​input

Add VNX DNS Domain

Summary
Add EMC VNX DNS Domain.
Description
Creates a DNS domains,which can have three DNS servers to a Data Mover.
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select name of the EMC Account in this system EMC_​Account​Identity Y
Name Enter new DNS Domain name.​ gen_​text_​input Y
Mover Enter mover.​ emc​Mover​Identity Y
DNS Servers Specify the list of IP addresses of DNS servers.​ The number of servers can not be more than 3.​ Y
Protocol Select Protocol emc​Dns​Domain​Protocol​Type​Selector Y
Outputs
Output Description Type
ACCOUNT_​NAME Name of the Account on which the selected operation was performed gen_​text_​input
DATACENTER_​NAME Name of the datacenter on which the selected operation was performed gen_​text_​input
DNS_​DOMAIN_​NAME_​IDENTITY Name of the Account on which the selected operation was performed emc​Dns​Domain​Identity

Add VNX Host Initiator Entry

Summary
Add Host Initiator Entry.
Description
This task allows to register a new or existing HBA initiator.
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select name of the EMC Account in this system EMC_​Account​Identity Y
Add Initiator to Select New Host or Existing Host emc​Add​Initiator​Type​Selector Y
Host Select Host to add Initiator emc​Host​Identity Y
Host Name Enter Host Name gen_​text_​input Y
IP Address Enter Host IP Address gen_​text_​input Y
Existing Host WWN Enter Host WWN gen_​text_​input Y
New Host WWN Enter Host WWN gen_​text_​input Y
SP Port Select SP Port emc​SPPort​Identity Y
Initiator Type Select Initiator Type emc​Initiator​Type​Selector Y
Failover Mode Select Failover Mode Y
Outputs
Output Description Type
OUTPUT_​SP_​A Storage Port SP A gen_​text_​input
OUTPUT_​SP_​B Storage Port SP B gen_​text_​input
OUTPUT_​HOST_​IDENTITY Host Identity emc​Host​Identity
OUTPUT_​INITIATOR_​IDENTITY Initiator Identity emc​Initiator​Identity

Add VNX LUN to Storage Group

Summary
Add LUN to Storage Group.
Description
This task Adds a LUN to a storage group and makes the LUN accessible to the servers connected to the storage group.
Inputs
Input Description Mappable To Type Mandatory
LUNs to Add Select LUNs emc​LUNIdentity Y
Storage Group Select Storage Group emc​Storage​Group​Identity Y
Let system specify Host LUN ID Check this option to let system specify HLU
Host LUN ID Please Enter Host LUN ID gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​LUN_​IDENTITY LUN Identity emc​LUNIdentity
OUTPUT_​HOST_​LUNID Host LUN ID gen_​text_​input
OUTPUT_​STORAGE_​GROUP_​IDENTITY_​LIST Comma separated Names for storage group gen_​text_​input
OUTPUT_​STORAGE_​GROUP1 Storage Group1 that was created as part of Add LUN To Storage Group gen_​text_​input
OUTPUT_​STORAGE_​GROUP2 Storage Group2 that was created as part of Add LUN To Storage Group gen_​text_​input
OUTPUT_​STORAGE_​GROUP3 Storage Group3 that was created as part of Add LUN To Storage Group gen_​text_​input
OUTPUT_​STORAGE_​GROUP4 Storage Group4 that was created as part of Add LUN To Storage Group gen_​text_​input

Add VNX NFS Export

Summary
Add NFS Export.
Description
By adding an NFS Export you can specify export permissions that enable or disable client access to the export.
Inputs
Input Description Mappable To Type Mandatory
Data Mover Mover emc​Mover​Identity Y
File System Path File System Path gen_​text_​input Y
Read only Hosts Read only Hosts gen_​text_​input
Read/Write Hosts Read/Write Hosts gen_​text_​input
Root Hosts Root Hosts gen_​text_​input
Access Hosts Access Hosts gen_​text_​input
Host Access Read-only Export Host Access Read-only Export
Outputs
Output Description Type
OUTPUT_​NFS_​EXPORT_​PATH Name of the nfs export.​ gen_​text_​input
OUTPUT_​NFS_​EXPORT_​IDENTITY NFS Export Identity.​ emc​Nfs​Export​Identity
OUTPUT_​EMC_​ACCOUNT_​IDENTITY EMC Account Identity.​ EMC_​Account​Identity

Associate VNX LUN as Datastore

Summary
Associate VNX LUN as Datastore.
Description
This task associates an existing VNX LUN as datastore.
Inputs
Input Description Mappable To Type Mandatory
Select Storage Processor Select storage processor.​ EMC_​Storage​Processor​Identity Y
Data store Name Enter a new data store name.​ gen_​text_​input
Select Host Node Select a hostnode to create data store.​ gen_​text_​input Y
Initiator Type Select the type.​ gen_​text_​input
LUN Name Select LUN name to associate with data store.​ emc​LUNIdentity Y
VDC Name Select v​DC to assign storage policy.​ v​DC
Success Criteria Select an option from list to pass the task emc​Vnx​Mount​Datastore​Success​Criteria Y
Outputs
Output Description Type
OUTPUT_​DATASTORE_​NAME Datastore name data​Store​Name
OUTPUT_​STORAGE_​VMFS_​DATASTORE_​NAME Storage VMFS Datastore Name data​Store​Name
OUTPUT_​VMWARE_​ACCOUNT_​NAME VMware account name.​ gen_​text_​input
OUTPUT_​VMWARE_​DATASTORE_​IDENTITY Datastore name identity vmware​Datastore​Identity
OUTPUT_​VMWARE_​DATASTORE_​INFO_​IDENTITY Datastore Info identity gen_​text_​input
OUTPUT_​VMWARE_​HOST_​NODE_​IDENTITY VMware Host Node Identity vmware​Host​Node​Identity
OUTPUT_​VMWARE_​HOST_​NODE_​NAME Host Node Name.​ vmware​Host​Multi​Select

Create VNX Block Storage Pool

Summary
Create Block Storage Pool.
Description
Creates storage pool with specified name.
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select name of the EMC Account in this system EMC_​Account​Identity Y
Storage Pool Name Select Storage Pool Name gen_​text_​input Y
Description Description for the new Storage Pool gen_​text_​input
Raid Type Select Raid Type emc​Raid​Type​Selector
Disks Select Disks emc​Free​Disks​Multi​Select Y
Percent Full Threshold(%) Select Percent Full Threshold Y
Outputs
Output Description Type
OUTPUT_​BLOCK_​STORAGE_​POOL_​IDENTITY Storage Pool For Block Identity emc​Block​Storage​Pool​Identity
OUTPUT_​EMC_​ACCOUNT_​IDENTITY EMC Account Identity.​ EMC_​Account​Identity

Create VNX File System

Summary
Create EMC VNX File System.
Description
This task Creates VNX File System on a datamover.
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select EMC Account EMC_​Account​Identity Y
Name Enter a unique name for the new file system gen_​text_​input
Create from Choose to create the file system from a storage pool or a metavolume.​ The selections on this page change based on your choice.​ emc​Vnx​File​System​Source​Type​List Y
Storage Pool Select the storage pool from which you want to allocate storage to the file system.​ emc​Storage​Pool​Identity Y
Storage Capacity Enter the amount of storage to allocate to the file system.​ gen_​text_​input Y
Capacity Units Enter File System Capacity Units EMCSize​Unit Y
Volume Select the underlying metavolume for the file system.​ emc​Volume​Identity Y
Contain Slices If the Slice Pool Volumes by Default option is selected on the Create Storage Pool page, this option is selected by default.​ In this case, volumes in the storage pool are sliced when pool space is allocated to a new file system.​ gen_​text_​input
Data Mover Enter mover.​ emc​Mover​Identity Y
Outputs
Output Description Type
FILE_​SYSTEM_​NAME Name of the file system created gen_​text_​input
OUTPUT_​FILE_​SYSTEM_​MOUNT_​PATH File System Mount path.​ gen_​text_​input
OUTPUT_​FILE_​SYSTEM_​IDENTITY File System Identity.​ emc​File​System​Identity
OUTPUT_​MOVER_​IDENTITY Mover Identity.​ emc​Mover​Identity
OUTPUT_​EMC_​ACCOUNT_​IDENTITY EMC Account Identity.​ EMC_​Account​Identity

Create VNX LUN

Summary
Create LUN.
Description
This task allows user to create VNX LUN of StoragePool type or RAID Group type.
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select name of the EMC Account in this system EMC_​Account​Identity Y
Storage Pool Type Select Pool Type emc​Storage​Pool​Type​Selector Y
Automatically assign LUN IDs as LUN Names Check this option to automatically assign LUN IDs as LUN Names Boolean
LUN Name Enter new LUN Name gen_​text_​input
LUN ID Select LUN ID gen_​text_​input
Raid Type Select Raid Type emc​Raid​Type​Selector Y
Raid Group Name for New LUN Select RAID Group emc​RAIDGroup​Identity Y
Storage Pool for New LUN Select Storage Pool emc​Block​Storage​Pool​Identity Y
Thin Check this option to create Thin LUN Boolean
Ignore Thresholds Check this option to ignore Storage Pool threshold limits Boolean
MAX Check this option to create MAX LUN Size Boolean
User Capacity Enter LUN Capacity gen_​text_​input Y
Capacity Units Enter LUN Capacity Units EMCSize​Unit Y
Enable Auto Assign Check to Enable Auto Assign Boolean
Alignment Offset(LBA) Enter Alignment Offset gen_​text_​input
SP Read Cache SP Read Cache Boolean
SP Write Cache SP Write Cache Boolean
No Initial Verify No Initial Verify Boolean
Rebuild Priority Rebuild Priority emc​VNXPriority​Selector Y
Verify Priority Verify Priority emc​VNXPriority​Selector Y
Default Owner Select Default Owner emc​VNXStorage​Processor​Selector Y
Initial Tier Placement Initial Tier Placement emc​VNXInitial​Tier​Placement​Selector Y
Outputs
Output Description Type
OUTPUT_​LUN_​IDENTITY LUN Identity emc​LUNIdentity
OUTPUT_​EMC_​ACCOUNT_​IDENTITY EMC Account Identity.​ EMC_​Account​Identity

Create VNX MetaLUN

Summary
Create Meta LUN.
Description
This task allows to dynamically expand the capacity of a single LUN by adding LUNs to base LUN for RAID Group type LUNs or increase the capacity of Storage Pool type LUN.
Inputs
Input Description Mappable To Type Mandatory
LUN to Expand Select LUN to Expand emc​LUNIdentity Y
Expansion Type Select expansion type
Flare LUNs Flare LUNs that should add to base LUN.​ emc​LUNIdentity Y
Meta LUN Name Enter new LUN Name gen_​text_​input
MAX Check this option to create MAX LUN Size
User Capacity Enter LUN Capacity Y
Capacity Units Enter LUN Capacity Units
Default Owner Select Default Owner gen_​text_​input Y
Element size Multiplier Enter Element size Multiplier
Alignment Offset Enter Alignment Offset
Enable Auto Assign Check this option to enable auto assign
Expansion Rate Select Expansion Rate gen_​text_​input
Outputs
Output Description Type
OUTPUT_​METALUN_​IDENTITY METALUN Identity emc​Meta​LUNIdentity

Create VNX Network Interface

Summary
Create Network Interface.
Description
Creates Network Interface.
Inputs
Input Description Mappable To Type Mandatory
Name Enter name for the Interface gen_​text_​input Y
Data Mover Enter mover.​ emc​Mover​Identity Y
Device Name Select Device Name emc​Data​Mover​Interface​Identity Y
IP Address Enter valid Address gen_​text_​input Y
Subnet Mask Enter mask gen_​text_​input Y
MTU Enter MTU gen_​text_​input Y
VLAN ID Enter VLAN ID gen_​text_​input
Outputs
Output Description Type
ACCOUNT_​NAME Name of the Account on which the selected operation was performed gen_​text_​input
DATACENTER_​NAME Name of the datacenter on which the selected operation was performed gen_​text_​input
DATA_​MOVER_​INTERFACE_​IP_​ADDRESS IP Address of the Data Mover Interface created gen_​text_​input
OUTPUT_​DATA_​MOVER_​INTERFACE_​IDENTITY Data Mover Interface Identity.​ emc​Data​Mover​Interface​Identity

Create VNX RAID Group

Summary
Create RAID Group.
Description
This task allows to create a new RAID Group with specific name.
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select name of the EMC Account in this system EMC_​Account​Identity Y
Let System Specify RAID Group ID Check this option to let system automatically assign RAID Group ID
RAID Group ID Enter RAID Group ID gen_​text_​input Y
Raid Type Select Raid Type emc​Raid​Type​Selector Y
Automatically Destroy after last LUN is unbound Check this option to automatically Destroy after last LUN is unbound
Expansion/Defragmentation Priority Check this option to set the Expansion/Defragmentation Priority
Allow Power Saving Allow Power Saving
Disks Select Disks emc​Free​Disks​Multi​Select Y
Outputs
Output Description Type
OUTPUT_​RAID_​GROUP_​IDENTITY RAID Group Identity emc​RAIDGroup​Identity

Create VNX Storage Group

Summary
Create Storage Group.
Description
This task allows to create a new Storage Group with specific name.
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select name of the EMC Account in this system EMC_​Account​Identity Y
Storage Group Name Enter name for the Storage Group.​ gen_​text_​input Y
Outputs
Output Description Type
OUTPUT_​STORAGE_​GROUP_​INDENTITY Storage Group Identity emc​Storage​Group​Identity

Create VNX Volume

Summary
Create EMC VNX Volume.
Description
Creates Volume of Stripe type,meta type or slice type.
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select EMC Account EMC_​Account​Identity Y
Name Unique name for the new volume.​ gen_​text_​input
Type Select the type of volume you want to create.​ The page reappears with different content depending on the volume type you select.​ gen_​text_​input Y
Volumes Select one or more volumes to create a stripe volume or metavolume.​ Striping volumes of different sizes uses the minimum size for striping and creates unused space in volumes larger than the minimum size.​ emc​Volume​Identity Y
Size (MB) For a slice volume, type the size of the slice volume in megabytes.​ gen_​text_​input Y
Stripe Size (KB) For a stripe volume, select the stripe depth in multiples of 8 kilobytes.​ Recommended size is 256 KB (default) for file systems run in a CIFS or NFS environment with a storage system.​ gen_​text_​input Y
Volumes For Slice Select a volume from which to create a slice volume.​ Available only for slice volumes.​ emc​Volume​Identity Y
Outputs
Output Description Type
OUTPUT_​VOLUME_​IDENTITY Volume Identity.​ emc​Volume​Identity
OUTPUT_​EMC_​ACCOUNT_​IDENTITY EMC Account Identity.​ EMC_​Account​Identity

Delete VNX Block Storage Pool

Summary
Delete Block Storage Pool.
Description
This task deletes the specified storage pool.
Inputs
Input Description Mappable To Type Mandatory
Storage Pool Select Storage pool to delete emc​Block​Storage​Pool​Identity Y
Are you sure you want to delete the selected storage pool? Storage pool delete warning message Y
Outputs
No Outputs

Delete VNX CIFS Server

Summary
Delete EMC VNX CIFS Server.
Description
This task deletes the specified CIFS server.
Inputs
Input Description Mappable To Type Mandatory
CIFS Server Select EMC VNX CIFS Server to delete emc​Cifs​Server​Identity Y
Outputs
No Outputs

Delete VNX CIFS Share

Summary
Delete EMC VNX CIFS Share.
Description
This task deletes the specified CIFS share.
Inputs
Input Description Mappable To Type Mandatory
CIFS Share Select EMC VNX CIFS Share to delete emc​Cifs​Share​Identity Y
Outputs
No Outputs

Delete VNX DNS Domain

Summary
Delete EMC VNX DNS Domain.
Description
This task deletes the specified DNS Domain.
Inputs
Input Description Mappable To Type Mandatory
DNS Domain Select EMC VNX Domain to delete emc​Dns​Domain​Identity Y
Outputs
No Outputs

Delete VNX File System

Summary
Delete EMC VNX File System.
Description
This task deletes the specified File System.
Inputs
Input Description Mappable To Type Mandatory
File System Select EMC VNX File System to delete emc​File​System​Identity Y
Outputs
No Outputs

Delete VNX LUN

Summary
Delete LUN.
Description
This task deletes the specified LUN.
Inputs
Input Description Mappable To Type Mandatory
Select LUN Select LUN that needs to be deleted.​ emc​LUNIdentity Y
Are you sure you want to delete the selected LUN ? LUN delete warning message Y
Outputs
No Outputs

Delete VNX MetaLUN

Summary
Description
Inputs
Input Description Mappable To Type Mandatory
Select Meta​LUN Select Meta​LUN that needs to be deleted.​ emc​Meta​LUNIdentity Y
Are you sure you want to delete the selected Meta​LUN ? Meta​LUN delete warning message Y
Outputs
Output Description Type
OUTPUT_​LUN_​IDENTITY LUN Identity emc​LUNIdentity

Delete VNX NFS Export

Summary
Delete EMC VNX NFS Export.
Description
Deletes the specified NFS Export Path.
Inputs
Input Description Mappable To Type Mandatory
NFS Export Select EMC VNX NFS Export to delete emc​Nfs​Export​Identity Y
Recursive Delete Check this option to perform Recursive Delete gen_​text_​input
Outputs
No Outputs

Delete VNX Network Interface

Summary
Delete EMC VNX Network Interface.
Description
Deletes EMC VNX Network Interface.
Inputs
Input Description Mappable To Type Mandatory
Interface Select EMC VNX Interface to delete emc​Data​Mover​Interface​Identity Y
Outputs
No Outputs

Delete VNX RAID Group

Summary
Delete RAID Group.
Description
Deletes the specified VNX RAID Group.
Inputs
Input Description Mappable To Type Mandatory
Select RAID Group Select RAID Group that needs to be deleted.​ emc​RAIDGroup​Identity Y
Are you sure you want to delete the selected Raid group? Raid group delete warning message Y
Outputs
No Outputs

Delete VNX Storage Group

Summary
Delete Storage Group.
Description
Deletes the specified VNX Storage Group.
Inputs
Input Description Mappable To Type Mandatory
Storage Group Select storage group name.​ emc​Storage​Group​Identity Y
Are you sure you want to delete the selected storage group? Storage group delete warning message Y
Outputs
No Outputs

Delete VNX Storage Pool

Summary
Delete EMC VNX Storage Pool.
Description
Deletes the specified VNX Storage Pool
Inputs
Input Description Mappable To Type Mandatory
Storage Pool Select EMC VNX Storage Pool to delete emc​Storage​Pool​Identity Y
Recursive Delete Check this option to perform Recursive Delete gen_​text_​input
Outputs
No Outputs

Delete VNX Volume

Summary
Delete EMC VNX Volume.
Description
Deletes the specified Volume
Inputs
Input Description Mappable To Type Mandatory
Volume Select EMC VNX Volume to delete emc​Volume​Identity Y
Recursive Delete Check this option to perform Recursive Delete gen_​text_​input
Outputs
No Outputs

Expand VNX Block Storage Pool

Summary
Expand VNX Block Storage Pool.
Description
Expands specified Block Storage Pool.
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select name of the EMC Account EMC_​Account​Identity Y
Storage Pool Name Select Storage Pool Name gen_​text_​input Y
Disks Select Disks emc​Free​Disks​Multi​Select Y
Outputs
Output Description Type
OUTPUT_​BLOCK_​STORAGE_​POOL_​IDENTITY Storage Pool For Block Identity emc​Block​Storage​Pool​Identity

Expand VNX LUN

Summary
Expand Storage Pool LUN.
Description
This task expands storage pool type LUNs.
Inputs
Input Description Mappable To Type Mandatory
LUN to Expand Select LUNs emc​LUNIdentity Y
User Capacity Enter LUN Capacity gen_​text_​input Y
Capacity Units Enter LUN Capacity Units EMCSize​Unit
Outputs
Output Description Type
OUTPUT_​LUN_​IDENTITY LUN Identity emc​LUNIdentity

Extend VNX FileSystem

Summary
Extend EMC VNX FileSystem.
Description
Extends EMC VNX File System.
Inputs
Input Description Mappable To Type Mandatory
Select EMC Account Select EMC Account EMC_​Account​Identity Y
File Systems File Systems emc​File​System​Identity Y
Extend From Select extend filesystem through Storage Pool or volume emc​Vnx​File​System​Source​Type​List Y
Storage Pool Select Storage Pool emc​Storage​Pool​Identity
Volume Select the underlying metavolume for the file system.​ emc​Volume​Identity Y
Size (MB) Enter size of the storage pool to extend gen_​text_​input
Outputs
Output Description Type
FILE_​SYSTEM_​NAME Name of the file system created gen_​text_​input
OUTPUT_​FILE_​SYSTEM_​IDENTITY File System Identity.​ emc​File​System​Identity

Modify VNX NFS Export

Summary
Modify NFS Export.
Description
Modifies NFS Export of specified File System in a Data Mover.
Inputs
Input Description Mappable To Type Mandatory
Data Mover Mover emc​Mover​Identity Y
File System Path File System Path gen_​text_​input Y
Read Only Hosts Read only Hosts gen_​text_​input
Read/Write Hosts Read/Write Hosts gen_​text_​input
Root Hosts Root Hosts gen_​text_​input
Access Hosts Access Hosts gen_​text_​input
Host Access Read-only Export Host Access Read-only Export
Outputs
Output Description Type
OUTPUT_​NFS_​EXPORT_​PATH Name of the nfs export.​ gen_​text_​input
OUTPUT_​NFS_​EXPORT_​IDENTITY NFS Export Identity.​ emc​Nfs​Export​Identity

Remove Hosts from VNX Storage Group

Summary
Remove Host from Storage Group.
Description
Removes the specified Hosts from the given VNX Storage Group
Inputs
Input Description Mappable To Type Mandatory
Storage Group Select storage group name.​ emc​Storage​Group​Identity Y
Select Host Select host name to unregister from the storage group.​ emc​Host​Identity Y
Outputs
No Outputs

Remove LUN from VNX Storage Group

Summary
Remove LUN from Storage Group.
Description
Remove the specified LUN from VNX Storage Group
Inputs
Input Description Mappable To Type Mandatory
Storage Group Select storage group name.​ emc​Storage​Group​Identity Y
Select LUN Select LUNs to remove them from Storage Group emc​LUNIdentity Y
Outputs
No Outputs

Remove VNX Initiator

Summary
Remove Initiator.
Description
Remove the specified VNX Initiator.
Inputs
Input Description Mappable To Type Mandatory
Initiator Select initiator to delete.​ emc​Initiator​Identity Y
Outputs
No Outputs