Chapter 1. Getting Started with Cisco UCS Director REST API

- New and Changed Information

- Overview

- Prerequisites

- Cisco UCS Director REST API SDK Bundle – Samples

- Example: Retrieving VDCs in a Group Based on a Logged-in User

- Example: Adding a Cisco UCS Manager UUID pool

- Example: Setup PXE Boot Task

- Example: Adding a Storage Policy

- Example: Adding a Network Policy

- Example: Modifying a LAN Port Channel

- List of Available Cisco UCS Director Reports

New and Changed Information

The following table provides an overview of the significant changes to this guide for the current release. The table does not provide an exhaustive list of all changes, or of all new features in this release.

New Features and Changed Behavior in Cisco UCS Director, Release 6.5

Feature

What's New

Where Documented

Code and status of REST API response

Provided the REST API response codes and its corresponding status.

How to Interpret the HTTP Response

Example: Adding a Cisco UCS Manager UUID pool

Provided a sample XML-based URL to add a Cisco UCS Manager UUID pool.

Example: Adding a Cisco UCS Manager UUID pool

Example: Setup PXE Boot Task

Provided a sample XML-based API URL to execute setup PXE boot task.

Example: Setup PXE Boot Task

Overview

- Why Use the REST API

- How the API Works

- How to Use the REST API

Why Use the REST API

The Cisco UCS Director REST API allows an application to interact with Cisco UCS Director, programmatically. These requests provide access to resources in Cisco UCS Director. With an API call, you can execute Cisco UCS Director workflows and change the configuration of switches, adapters, policies, and other hardware and software components.

The API accepts and returns HTTP messages that contain JavaScript Object Notation (JSON) or Extensible Markup Language (XML) documents. The JSON or XML payload contained in an HTTP message describes a method or managed object (MO) in Cisco UCS Director. You can use any programming language to generate the messages and the JSON or XML payload.

How the API Works

In RESTful APIs, the HTTP method specifies the action you want to perform and the URI specifies the resource you want to access.

REST API uses the following HTTP methods to perform create, read, update, and delete (CRUD) operations:

HTTP Method

Description

GET

Retrieves the specified resource. GET is a read-only operation that does not change the engine state.

- The HTTP GET operation must not have a request body. If information is passed in a GET request, query parameters must be used instead.

- Unless specified, the HTTP GET operation returns the configured state. For example, an HTTP GET operation of the global routing table returns the dynamic run-time state.

POST

Submits the data to be processed by the specified resource. The data to be processed is included in the request body. A POST operation can create a new resource.

- Every POST request must include a JSON body containing a definition of the new resource.

- For a POST operation to create a new resource, the location header in the HTTP response must contain the complete URL to be used for subsequent PUT, GET, and DELETE commands.

- The HTTP POST response to a create request must have a 201 return code and a location header containing the URI of the newly created resource in the HTTP header.

PUT

Updates the specified resource with new information. The data that is included in the PUT operation replaces the previous data.

- The PUT operation cannot be used to create a new resource.

- The request body of a PUT operation must contain the complete representation of the mandatory attributes of the resource in JSON format.

DELETE

Deletes a resource.

- If you delete a resource that has already been deleted, a 404 Not Found response is returned.

- The HTTP DELETE operation must not have a request body. If information is passed in a GET request, query parameters must be used instead.

How to Use the REST API

To access the REST API browser through Cisco UCS Director, a valid Cisco UCS Director user account and an API access key are needed. Cisco UCS Director uses the API access key to authenticate API requests. This access key is a unique security access key code that is associated with a specific Cisco UCS Director user account. For more information about how to generate an API access key, see Generating an API Access Key.

You must pass the REST API access key as a name:value header following standard HTTP syntax and semantic rules. For example, a valid name:value header is X-Cloupia-Request-Key: F90ZZF12345678ZZ90Z12ZZ3456FZ789. For more information about the API request header, see How to Make a REST API Request and RFC2616 Header Field Definitions.

The REST API call can be made in one of the following ways:

- Cisco UCS Director GUI—Cisco UCS Director provides a developer menu option to offer the report metadata and REST API Browser for developers. To access these features, enable the developer menu. For more information about how to enable the developer menu, see Enabling the Developer Menu Options.

On enabling the developer menu, you gain access to the following features:

- Report Metadata—The report metadata enables you to view the REST API URL for every report displayed in Cisco UCS Director. For more information about how to access Report Metadata, see Accessing the Report Metadata.

- REST API Browser—The REST API Browser is accessible from the Orchestration menu of Cisco UCS Director. The REST API Browser provides API information and API code generation capabilities that make it easy to see and work with all the available APIs, including both the REST APIs and the Java APIs. For more information about how to access REST API Browser, see Using the REST API Browser.

- REST Client—The REST Client is a useful widget for parsing and viewing API requests and responses. In this widget, you can enter a REST URL and apply an HTTP method such as POST, PUT, or DELETE to the URL for data manipulation. The REST Client provides a simple user interface for entering a URL to fetch data from the Cisco UCS Director server.

- If you are using Mozilla Firefox, download RESTClient from Add-ons for Firefox.

- If you are using Google Chrome, download Advanced REST Client from the Chrome Web Store.

Note

If you are logged in to Cisco UCS Director, use any supported web browser to send API requests and get responses.

- Code—The Sample Java Code tab of the REST API Browser tab provides a code snippet that can be used to automate the management services.

The Cisco UCS Director SDK binary downloaded from the software download area or the DevNet site includes a sample project that can be used as a platform for executing client code.

Prerequisites

Before you start using the Cisco UCS Director SDK, make sure that:

- Cisco UCS Director is installed and running on your system. For more information about how to install Cisco UCS Director, refer the Cisco UCS Director Installation Guide.

- The Cisco UCS Director SDK is installed on your system.

- You have Java Version 1.8 for your Java development environment.

Note

You need Java Version 1.6 if you have release 5.3 or earlier of Cisco UCS Director

- You have an API access key. For more information about how to generate an API access key, see Generating an API Access Key.

- You have a REST client to execute RESTful web services.

Note

- If you are using Mozilla Firefox, download RESTClient from Add-ons for Firefox.

- If you are using Google Chrome, download Advanced REST Client from the Chrome Web Store.

- Generating an API Access Key

Generating an API Access Key

Procedure

Step 1

Log in to Cisco UCS Director.

Step 2

Hover the mouse over the user icon at the top right corner and choose Edit My Profile from the drop-down list.

Step 3

On the Edit My Profile page, click Show Advanced Settings.

Step 4

To copy the value displayed in the REST API Access Key area, click Copy Key Value.

Step 5

Save the access key in a secure location, and use it in the API request header.

For more information about the API request header, see How to Make a REST API Request.

Step 6

If you want to change the API access key, click Regenerate Key.

After you generate a new key, the old key code is retired and you cannot use it.

The Cisco UCS Director REST API SDK Bundle

The Cisco UCS Director REST API SDK Bundle is part of the Cisco UCS Director REST API. In addition to documentation such as the Cisco UCS Director REST API cookbook, the SDK Bundle provides examples that you can use with the REST API. These examples include test cases and sample code that demonstrates the use of the SDK classes.

The SDK Bundle is delivered in an archive file named ucsd-rest-api-sdk-v2.zip.

Installing the Cisco UCS Director SDK

Procedure

Step 1

Download the digitally signed zip file (CUSD_SDK_BINARIES_xxxxx_SIGNED.zip) from the software download area or the DevNet site.

Step 2

Unzip the CUCSD_SDK_BINARIES_xxxxx_SIGNED.zip file. You will get the CUCSD_SDK_BINARIES_xxxxx.zip file and other supporting digital signature files.

Unzip the CUSD_SDK_BINARIES_xxxxx.zip file. The following files appear:

- cucsd_script_code_samples-x.x.x.x

- cucsd_cloupia-script-bundle-x.x.x.x

- cucsd-open-auto-sdk-bundle-x.x.x.x

- cucsd-rest-api-sdk-bundle-x.x.x.x

- cucsd-sdk-javadocs-x.x.x.x

- UCSDirector_PSC.exe

Step 3

Unzip the cucsd-rest-api-sdk-bundle-x.x.0.0.zip file. This expands and provides the ucsd-rest-api-sdk-x.x.0.0.zip and ucsd-rest-api-sdk-javadocs-x.x.0.0.zip files.

Step 4

Unzip the ucsd-rest-api-sdk-x.x.0.0.zip file.

The ucsd-rest-api-sdk-x.x.0.0 folder is created on the local drive.

This folder includes the following folders and files to assist you in developing applications with the REST API:

- lib—This folder contains the ucsd-rest-api-sdk-v2.0.jar file. This file is the archive of all classes and libraries required for managing the Cisco UCS Director.

- src—This folder contains the example test cases and sample code. These tests cases and codes demonstrate the use of the SDK classes in the ucsd-rest-api-sdk-v2.jar file. The sample code is available in the src\com\cisco\cuic\api\examples folder.

- .classpath—This file indicates where to look for SDK classes and packages, to the Java Virtual Machine (JVM) or Java compiler.

- .project—This file is used to import the SDK Bundle into the Eclipse IDE. This file is required for development purposes. It is available at the top level of the archive.

- README.txt—This file contains lists of all components included in the SDK Bundle.

- rest-server.properties—This file contains the properties used by the examples in the src\com\cisco\cuic\api\examples folder.

Step 5

Unzip the ucsd-rest-api-sdk-javadocs-x.x.0.0.zip file.

The ucsd-rest-api-sdk-javadocs-x.x.0.0 folder is created on the local drive, and it contains:.

- javadocs—This folder contains the Cisco UCS Director REST API Javadocs. The Javadocs cover all classes provided with the SDK Bundle.

Step 6

Add the ucsd-rest-api-sdk-v2.jar file to the Java classpath when compiling and running the client program. Use Java Version 1.8 to run the Cisco UCS Director SDK.

Note

For Cisco UCS Director Releases 5.3 and previous releases, use Java version 1.6 to run the Cisco UCS Director SDK.

Downloading the REST API SDK Bundle

The Cisco UCS Director SDK binaries can be downloaded from the software download area or the DevNet site. Alternatively, an admin user and an end user can download the SDK binaries from Cisco UCS Director.

Procedure

Step 1

To download the REST API SDK bundle as an admin user, complete the following steps:

1. Log in to Cisco UCS Director.

2. Choose Administration > Downloads.

The following files are displayed:

- REST API SDK—cucsd-rest-api-sdk-bundle.zip

- PowerShell Console—UCSDirector_PSC.exe

- Open Automation SDK—cucsd-open-auto-sdk-bundle.zip

- Custom Tasks Script Samples—cucsd-cloupia-script-bundle.zip

3. Choose the cucsd-rest-api-sdk-bundle.zip file.

4. Click Download to download the SDK bundle.

Step 2

To download the REST API SDK bundle as an end user, complete the following steps:

1. Log in to the Cisco UCS Director End User Portal.

2. On the menu bar, click Services.

3. Click the Downloads tab.

The following files are displayed:

- REST API SDK—cucsd-rest-api-sdk-bundle.zip

- PowerShell Console—console.exe

4. Choose the cucsd-rest-api-sdk-bundle.zip file and click Download.

The file is downloaded to the default download location.

List of Deprecated APIs

Developers are encouraged to migrate to the new API, instead of using the deprecated API.

Deprecated and New APIs

Deprecated API

Supported Till

New API

userAPICheckFunds

Release 4.1

From Cisco UCS Director Release 5.x and later releases, the UserAPICheckFunds API that is available in the userAPIGlobal folder is deprecated. To check the available customer funds, use the UserAPICheckFunds API in the userAPIChargeBack folder.

userAPISubmitServiceRequest

Release 4.1

userAPIProvisionRequest

userAPISubmitServiceRequestCustom

Release 4.1

userAPIProvisionRequest

UserAPIProvisionRequestWithPortGroup

Release 4.1

userAPIVMWareProvisionRequest

userAPIGetWorkflows

Release 4.1

userAPIGetWorkflowInputs

userAPIImportWorkflows

Release 5.3

UserAPICreateAPICContainer

Release 5.4

userAPIResetMyPassword

Release 5.5

userAPIModifyLoginProfilePassword

userAPIResetUserPassword

Release 5.5

userAPIModifyUserPassword

userAPIAddTierToContainerVM

Release 5.5

userAPIAddTierToContainer

Setting up the Environment for Using the REST API Through the GUI

Enable the developer menu option to access the REST API Browser and Report Metadata information in Cisco UCS Director. The REST API Browser and Report Metadata features provide you with site-specific API data.

The HTTP request code provided by the Report Metadata view yields immediate API service results. You can use these options in every situation where you need API information.

The Cisco UCS Director REST API Browser provides API information and API code generation capabilities that make it easy to see and work with all of the available APIs, including both the REST APIs and the Java APIs.

To use REST API in the GUI, perform the following tasks:

- Enabling the Developer Menu Options

- Using the REST API Browser

- Accessing the Report Metadata

- Enabling the Developer Menu Options

- Using the REST API Browser

- Accessing the Report Metadata

Enabling the Developer Menu Options

Before you begin

Obtain one or more user accounts that provide the same administrative access to data that your application users will have. Your Cisco UCS Director administrator can explain the data access limitations associated with different administrator and end-user roles. You may want multiple user accounts to test the user experiences associated with different data accesses and security controls.

Procedure

Step 1

In Cisco UCS Director, hover the mouse over the user icon at the top right corner and choose Edit My Profile from the drop-down list.

Step 2

On the Edit My Profile page, click Show Advanced Settings.

Step 3

Check Enable Developer Menu (requires re-login).

The REST API Browser is activated in the Orchestration page, and the Report Metadata option becomes available in the report views.

Tip

The Advanced area displays the REST API Access Key code for the account.

Step 4

Click Close.

Using the REST API Browser

The Cisco UCS Director REST API Browser provides API information and API code generation capabilities that assist and educate developers in the use of all available Cisco UCS Director APIs, including the XML-formatted REST API and the Java API. The primary view lists the Task folders that contain the APIs. The task names supply the categories under which the APIs are listed. For example, all the APIs pertaining to NetApp ONTAP tasks and NetApp OnCommand tasks are available inside the folders with these names.

Note

The access for XML-based version-2 APIs with the /api/v2 context is role-based. Service end users cannot execute the GET Operations with these APIs. Also, service end users can perform the create, update and delete operations using the REST API only if they can perform the same operation using the graphical user interface of Cisco UCS Director. If these users cannot perform a create, update or delete operation in the user interface, then they cannot perform these actions using the REST API either.

Before you begin

- Obtain one or more user accounts that provide the same administrative access to data that your application users will have. Your Cisco UCS Director administrator can explain the data access limitations associated with different administrator and end-user roles. You may want multiple user accounts to test the user experiences associated with different data accesses and security controls.

- Enable the developer menu option for the session.

Procedure

Step 1

Choose Orchestration.

Step 2

Click REST API Browser.

Click the right scroll arrow, if necessary, to view and navigate to REST API Browser menu item.

Step 3

Open the task folder that contains the API you want to view.

Tip

You can use the Search field at the top right corner to find a specific API if you do not know which task folder it belongs to. Enter a word(s) that represents the API Resource, Operation, or Description field to narrow your search. You can also use the other options on that menu bar, such as the Add Advanced Filter, to find a specific API.

Step 4

Double-click a row that contains an API resource and operation that is required.

The REST API browser screen displays the following:

- API Examples—Displays the API data for your selection and enables you to generate a sample XML. Depending on the operation and resource that you have selected, this area might also include data entry boxes that accept parameter values. If the data has to be chosen from a list of data, such as group list available in Cisco UCS Director, the data is listed out in a table. Choose a data and click Select to generate sample XML based on the data.

From the Server drop-down list, choose a server on wich the API has to be executed. Click Execute REST API to view the response of the sample XML.

- Details—Provides more details about the API, including the API definition, input parameters, and output parameters.

- Sample Java Code—Provides sample code for the API.

Accessing the Report Metadata

Report Metadata enables you to view the API code used by Cisco UCS Director, including the API request code for every report displayed in Cisco UCS Director. This code includes a complete URL that is ready to paste into a browser to send the URL request to Cisco UCS Director. The immediate API responses provide information for the developer. To see the API request code, navigate to a report and select Report Metadata.

Before you begin

- Obtain one or more user accounts that provide the same administrative access to data that your application users will have. Your Cisco UCS Director administrator can explain the data access limitations associated with different administrator and end-user roles. You may want multiple user accounts in order to test the user experiences associated with different data accesses and security controls.

- Enable the Developer Menu option for the session.

Procedure

Step 1

In Cisco UCS Director, navigate to the page for which you want to see the API code.

For example, click Orchestration.

Step 2

On the Workflow page, click Report Metadata.

Step 3

In the Information screen, review the report context, report definition, API parameters, and REST API URL.

Setting up the Environment for Using the REST API Through the REST Client

The REST Client provides a standalone client that parses and labels the API data in a useful and informative way. You can also use any supported web browser to send API requests and get responses. Download a supported REST Client in a web browser to execute the REST URLs.

- In Mozilla Firefox, download RESTClient from Add-ons for Firefox.

- In Google Chrome, download Advanced REST Client from the Chrome Web Store.

Using the REST Client, you can execute the JSON APIs and XML APIs.

The sample JSON-based API URL to retrieve all catalogs using the GET method:

http://<serverip>/ app/api/rest?formatType=json&opName=userAPIGetAllCatalogs&opData={}

The sample XML-based API URL to create a user using the POST method:

http://serverip/cloupia/api-v2/user

<cuicOperationRequest>
<payload>
<![CDATA[
<AddUserConfig>
<userType>Admin</userType>
<!-- Accepts value from the list: userGroupByType-->
<userGroup>1</userGroup>
<mspOrganization></mspOrganization>
<loginName>apiuser</loginName>
<!-- Accepts value from the list: password-->
<password>bGthbmRhc2E=</password>
<!-- Accepts value from the list: password-->
<confirmPassword>bGthbmRhc2E=</confirmPassword>
<userContactEmail>apiuser@cisco.com</userContactEmail>
<firstName>API</firstName>
<lastName>User</lastName>
<phone></phone>
<address></address>
</AddUserConfig>

]]>
</payload>
</cuicOperationRequest>

The HTTP response of the user creation URL:

HTTP Response Code : 200
Response data :
<?xml version="1.0" encoding="UTF-8" standalone="yes"?><cuicOperationResponse>
<Log><Messages>1</Messages><Message><TimeStamp>2015-08-28 06:55:17.240</TimeStamp>
<Severity>INFO</Severity><Text>User Admin Created Successfully</Text>
</Message></Log><operationStatus>0</operationStatus><response><AddUserConfigResponse>
<OUTPUT_USER_NAME>apiuser</OUTPUT_USER_NAME></AddUserConfigResponse></response>
<responseMap><entry><key>OUTPUT_USER_NAME</key><value>apiuser</value></entry>
</responseMap></cuicOperationResponse>

Setting up the Environment for Using the REST API Through Code

Import the Cisco UCS Director SDK bundle as a Java project into the Eclipse IDE to execute the code in Eclipse. For more information about how to import the Cisco UCS Director SDK bundle, see Importing the SDK Bundle Project into the Eclipse IDE. The code can be taken from the Sample Java Code tab of the REST API Browser. For more information about how to access the REST API Browser, see Using the REST API Browser.

Note

The instruction for using the Cisco UCS Director SDK bundle in Eclipse is captured in the document. The similar process is applicable for other IDEs but developers must figure out the details for themselves.

- Importing the SDK Bundle Project into the Eclipse IDE

Importing the SDK Bundle Project into the Eclipse IDE

Before you begin

Obtain the SDK Bundle archive and extract the contents to an appropriate folder.

Procedure

Step 1

In the Eclipse IDE, choose File > New > Java Project.

The Create a Java Project dialog box appears.

Step 2

In the Project Name field, enter a name for the project.

Step 3

Right click the project, and select Import.

The Import dialog box appears.

Step 4

Select File System and click Next.

Step 5

Click Browse and navigate to the folder where you have extracted the SDK Bundle.

Step 6

Click Finish.

The Eclipse IDE displays the SDK Bundle project on the Project Explorer tab.

How to Make a REST API Request

API clients use an HTTP request to interact with Cisco UCS Director. To pass the REST API access key, each request must be associated with an HTTP header called X-Cloupia-Request-Key with its value set to the current REST API access key. For information about how to generate the REST API access key, see Generating an API Access Key.

Requests made to the API have the following characteristics:

- Requests are sent over HTTP.

- Request must contain a valid URL in the one of the following formats:

- JSON Format

http://SERVER/app/api/rest?formatType=json&opName=operationName&opData=
operationData
where:

- SERVER—The IP address or the hostname of the Cisco UCS Director VM.

- formatType—The only supported format that is discussed here is JavaScript Object Notation (JSON). Set this parameter value to json.

- opName—The API operation name associated with the request. For example, userAPIGetMyLoginProfile or userAPIGetVMActionStatus.

- opData—Parameters (or arguments) associated with the operation. Cisco UCS Director uses JSON encoding of the parameters. If no arguments are required for the operation, use {} as an empty set. Before you send JSON data in a request, encode the URL by applying escape characters as appropriate. For details about encoding the URL, see the RFC at http://www.ietf.org/rfc/rfc1738.txt. For more information about JSON syntax and data types, see http://en.wikipedia.org/wiki/JSON#Data_types.2C_syntax_and_example. For information about non-JSON formatted API requests, see Using the REST API Browser.

Note

When passing parameters in the REST API URL request, you must pass the parameters within the two single quotes (for example, param0: ''CatalogName"). If the parameter value includes any punctuations, your session will get hanged after validation.

- XML Format

http://server/cloupia/api-v2/group

HTTP method: POST

<cuicOperationRequest>
<payload>
<![CDATA[
<AddGroupConfig>
<groupName>TestGroup</groupName>
<groupDescription></groupDescription>
<parentGroup>0</parentGroup>
<groupCode></groupCode>
<groupContact>jbesai@cisco.com</groupContact>
<firstName></firstName>
<lastName></lastName>
<phone></phone>
<address></address>
<groupSharePolicyId></groupSharePolicyId>
<allowPrivateUsers>false</allowPrivateUsers>
</AddGroupConfig>
]]>
</payload>
</cuicOperationRequest>
For REST API examples, refer the Cisco UCS Director REST API Cookbook.

Note

If the variable passed in the REST URL has special characters, the variable must be enclosed within single quotes (') as shown in the following example:

Resource URL Format

/cloupia/api-v2/datacenter/{datacenter}/NetworkInventory/{networkInventoryID}/VLAN/{VLANID}

Resource URL

/cloupia/api-v2/datacenter/Default Pod/NetworkInventory/'172.29.195.215'/VLAN/VLAN0800

About Operations Data Parameters or Arguments

As the method and the API resource type are communicated through the opName, the operation parameters must present any arguments that you want to designate a specific instance of the resource to be operated upon.

Operations Data Parameter Syntax

The following table shows examples of operations data parameter syntax in JSON format.

If the operation needs the following parameters (opData)

How to represent in JSON

No parameters

{}

One parameter; integer (for example, 10)

{param0:10}

One parameter: string (for example, cloud)

{param0:"cloud"}

Two parameters: a string and an Integer

{param0:"cloud",param1:10}

Two parameters: a string with null value and an Integer

{param0:null,param1:10}

Three parameters

{param0:"cloud",param1:"cloupia",param2:100}

Operation Data Parameter Examples

…&opData={param0:"datacenter",param1:"DataCenter1",param2:"STORAGE-ACCOUNTS-T51"

…&opData={param0:"Create NFS Datastore",param1:{"list":[{"name":"Volume Size","value":100},
{"name":"Select Group","value":"14"},{"name":"Select vDC","value":18}]},param2:212}

- param0—Name of the workflow being invoked through the REST API.

- param1—Input being passed to the workflow. If there is more than one input, separate the inputs with commas and put two single quotation marks around the input names and values. If there are no inputs, use the keyword null as the parameter value.

- param2—If this workflow is being invoked as a child workflow of another service request, use the service request (SR) ID. If this workflow is not invoked as a child workflow, use –1. When –1 is used, a new service request is created.

Tip

Cisco UCS Director provides many complete API requests, formatted as URLs and ready for you to cut and paste into a browser. See Enabling the Developer Menu Options.

Context Parameters

In the preceding example, param0 is used to specify the Cisco UCS Director context. The context data value refers to one of the major domains managed by Cisco UCS Director, for example, global-services, datacenter, or storage_accounts. A list of the standard Cisco UCS Director contexts appears in API Request Context Parameters.

Report Parameters

The report parameter value is always the reportId. Typical reportIds include "STORAGE-ACCOUNTS-T51", "CPU-S0", "VOLUMES--X1", "NETWORK-USAGE-H0", "PORT-SUMMARY-V50", and "PRIVATE-CLOUD-FREE-STORAGE-S1". The reportId is typically the last parameter listed in an API request for a report. So, if the context is specified by two parameters, the report parameter is often the third, param2. For an extensive list of report names and reportIds, categorized by context, see List of Available Cisco UCS Director Reports.

Handle Special Characters in REST URL

The characters "&", "=", "+", ",", and "$" are reserved special characters by URL standards. Hence, it is better to avoid using them when data is part of the URL (like the JSON requests) instead of being sent as a payload.

In unavoidable circumstances, you can alternatively use their unicode formats:

Special Character

Unicode

&

\u0026

=

\u003D

+

\u002B

,

\u002C

$

\u0024

For example, if the data to be passed in the REST URL is Business Operations & PMO. WSS, the special character can be replaced with the unicode format and the data can be passed as Business Operations \u0026 PMO. WSS.

Few more examples:

App+App Data = App\u002BApp Data

area,street = area\u002Cstreet

50$ = 50\u0024

if x=y = if x\u003Dy

Sample API Request 1

The operation that requests a Login profile refers to the logged-in user, so there is no need for a parameter. Most other operations need multiple arguments.

http://10.10.1.153/app/api/rest?formatType=json&opName=userAPIGetMyLoginProfile&opData={}

Response to Sample API Request 1

{ "serviceResult":{"userId":"jsmith","firstName":"John","lastName":"Smith","email":
"jsmith@example.com","groupName":"Eng Group","role":"Regular"}, "serviceError":null,
"serviceName":"InfraMgr", "opName":"userAPIGetMyLoginProfile" }

Sample API Request 2

In this request for a report about a chassis for a data center, the operation requires three parameters, which are typical for a report request.

http://172.17.9.142/app/api/rest?opName=userAPIGetTabularReport&opData=
{param0:"datacenter",param1:"datacenter",param2:"UCS-CHASSIS-T50"}

Response to Sample API Request 2

{"serviceResult":
{"rows":[{"ID":"PHY-ACC;sys/chassis-2",
"Account_Name":"PHY-ACC","DN":"sys/chassis-2",
"Serial_Number":"1558","Model":"N20-C6508","Power_State":"ok",
"Operation_State":"accessibility-problem",
"Configuration_State":"ok","License_State":"license-ok","Servers":5,
"IO_Modules":2,"PSUs":4,"Fan_Modules":8,
"Vendor":"Cisco Systems Inc"},{"ID":"UCSCirrus;sys/chassis-1",
"Account_Name":"UCSCirrus","DN":"sys/chassis-1",
"Serial_Number":"FOX1352GDX4","Model":"N20-C6508",
"Power_State":"redundancy-failed","Operation_State":"power-problem",
"Configuration_State":"ok","License_State":"license-ok","Servers":7,
"IO_Modules":2,"PSUs":4,"Fan_Modules":8,
"Vendor":"Cisco Systems Inc"},{"ID":"UCSM237;sys/chassis-1",
"Account_Name":"UCSM237","DN":"sys/chassis-1",
"Serial_Number":"1557","Model":"N20-C6508","Power_State":"ok",
"Operation_State":"operable",
"Configuration_State":"unsupported-connectivity","License_State":"license-ok",
"Servers":6,"IO_Modules":2,
"PSUs":4,"Fan_Modules":8,"Vendor":"Cisco Systems Inc"},
{"ID":"real108;sys/chassis-1","Account_Name":"real108",
"DN":"sys/chassis-1","Serial_Number":"FOX1352GDX4","Model":"N20-C6508",
"Power_State":"redundancy-failed",
"Operation_State":"power-problem","Configuration_State":"ok",
"License_State":"license-ok","Servers":7,
"IO_Modules":2,"PSUs":4,"Fan_Modules":8,"Vendor":"Cisco Systems Inc"}],
"columnMetaData":null}, "serviceError":null, "serviceName":"InfraMgr",
"opName":"userAPIGetTabularReport" }}

Tip

For advanced Cisco UCS Director API users, the code in the Report Metadata request for the data center UCS-CHASSIS-T50 report gave the first parameter as param0:"23". In the request used in Sample API Request 2, the context "datacenter" was substituted for the value "23" and the request was successful.

API Request Context Parameters

Cisco UCS Director REST API operations that require parameters typically require the context as a parameter. There are a few exceptions, notably the operations that pick the context from login information.

If you want to create an API request, you have two options for finding the correct context parameter value to use:

- Find the correct context name string in the list of standard Cisco UCS Director contexts, and copy it into the JSON parameter specification in your API request.

- In Cisco UCS Director, navigate to a report that represents the same report data that you want to request through the API. Find the REST API URL in Report Metadata and use the context parameter(s) that you find there.

Timesaver

If you find the URL code used to send a request in Cisco UCS Director, you can use some or all of that API request data to create your own request.

Note

In some scenarios, you might want to use the English (human-readable) name string for the context value rather than the numeral string value that is provided in the Report Metadata listing of the REST API URL.

Context Field Names and Corresponding Parameter Names

In the listing below, the first element is the name of the field; the second, in quotation marks, is the context value that you should assign to the parameter representing the context. In most requests for reports, param0 provides the context. If another context parameter (param1) value is required, you can use the value provided for this parameter in the Report Metadata listing of the REST API URL.

Administrative Contexts

- CONTEXT_TYPE_GLOBAL= "global";

- CONTEXT_TYPE_GLOBAL_ADMIN = "global_admin";

- CONTEXT_TYPE_GLOBAL_SERVICES = "global-services";

- CONTEXT_TYPE_CLOUD = "cloud";

- CONTEXT_TYPE_HOSTNODE = "hostnode";

- CONTEXT_TYPE_CLUSTER = "cluster";

End User Contexts

- CONTEXT_TYPE_GROUP = "group";

- CONTEXT_TYPE_VM = "vm";

- CONTEXT_TYPE_VDC = "vdc";

- CONTEXT_TYPE_SR = "servicerequest";

Data Center Contexts

- CONTEXT_TYPE_PHYSICAL_DATACENTER = "datacenter";

NetApp Report Contexts

- CONTEXT_TYPE_STORAGE_ACCOUNTS= " storage_accounts";

- CONTEXT_TYPE_STORAGE_FILERS = " netapp_filer";

- CONTEXT_TYPE_STORAGE_AGGREGATES = " storage_aggregates";

- CONTEXT_TYPE_STORAGE_VOLUMES = "storage_volumes";

- CONTEXT_TYPE_STORAGE_LUNS = "luns";

- CONTEXT_TYPE_STORAGE_VFLIERS = "netapp_v_flier";

UCS Report Contexts

- CONTEXT_TYPE_INFRA_COMPUTE_UCSM_ACCOUNT= " ucsm";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_FABRIC_INTERCONNECT = " compute_fbi";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_CHASSIS = " compute_chassis";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_SERVER = "compute_server";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_SERVICE_PROFILE = "service_profile";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_PORT_CHANNEL = "ucs_portchannel";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_ORGANIZATION = "ucs_org";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_SERVICE_PROFILE_TEMPLATE = "ucs_service-profile-template";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_BOOT_POLICY = "ucs_boot_policy";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_VNIC_TEMPLATE = "ucs_vnictemplate";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_MAC_POOL = "ucs_mac";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_UUID_POOL = "ucs_uuid";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_WWNN_POOL = "ucs_wwnn";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_WWPN_POOL = "ucs_wwpn";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_SERVICE_PROFILE_VHBA = "ucs_sp_vhba";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_SERVICE_PROFILE_VNIC = "ucs_sp_vnic";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_IOMODULE = "ucs_iomodule";

- CONTEXT_TYPE_INFRA_COMPUTE_UCS_SERVER_ADAPTER_UNIT = "compute_server_adapter_unit";

Network Report Contexts

- CONTEXT_TYPE_INFRA_NETWORK_DEVICE= "network_device";

- CONTEXT_TYPE_INFRA_NET_DEVICE_N1K = " net_device_n1k";

- CONTEXT_TYPE_INFRA_NET_DEVICE_FAB_IC = " net_device_fab_ic";

- CONTEXT_TYPE_INFRA_NET_DEVICE_N5K = "net_device_n5k";

- CONTEXT_TYPE_INFRA_NETWORK_DEVICE_VLAN = "net_device_vlan";

- CONTEXT_TYPE_INFRA_NETWORK_DEVICE_VSAN = "net_device_vsan";

- CONTEXT_TYPE_INFRA_NETWORK_DEVICE_INTERFACE = "net_device_interface";

- CONTEXT_TYPE_INFRA_NETWORK_DEVICE_PORT_PROFILE = "net_device_port_profile";

- CONTEXT_TYPE_INFRA_NETWORK_DEVICE_ZONE = "net_device_zone";

- CONTEXT_TYPE_INFRA_NET_QOS_POLICY = "net_device_qos_policy";

How to Interpret the HTTP Response

The following HTTP status codes are returned by Cisco UCS Director:

- 401 Unauthorized—The API key is not a valid key.

- 200 OK—Cisco UCS Director has processed the request. The actual status of the request is in the body of the response.

The Cisco UCS Director response body is in JSON format as determined by the FormatType parameter specified in the API request.

Code and Status of an REST API Response

Code

Status

0

SUCCESS

1

UNKNOWN_RESOURCE

2

NOT_SUPPORTED

3

INTERNAL_ERROR

4

FAILED

5

ALREADY_EXISTS

6

INVALID_INPUT

7

RESOURCE_NOT_FOUND

8

INVALID_REQUEST

Components of an API Response

API Response Component

Description

Component Example (Success Scenario)

serviceResult

If the request succeeds, this result contains a set of name-value pairs or a JSON object or report.

"serviceResult":
{"userId":"jsmith",
"firstName":"John","lastName":"Smith",
"email":"jsmith@example.com",
groupName":"Eng Group","role":"Regular"}

serviceError

If the request succeeds, the serviceError is set to null. If the operation fails, the serviceError contains the error message.

"serviceError":null

serviceName

Name of the backend service. The backend service is often set to InfraMgr.

"serviceName":"InfraMgr"

opName

Name of the operation provided in the request.

"opName":"userAPIGetMyLoginProfile"

Example: API Response in a Success Scenario

{
"serviceResult":{"userId":"jsmith","firstName":"John","lastName":"Smith",
"email":"jsmith@example.
com","groupName":"Eng Group","role":"Regular"}, "serviceError":null,
"serviceName":"InfraMgr",
"opName":"userAPIGetMyLoginProfile"
}

Example: API Response in a Failure Scenario

{ "serviceResponse":null,
"serviceError":"SERVICE_CALL_EXCEPTION: Service InfraMgr does not support operation test",
"serviceName":"InfraMgr", "opName":"test"
}

API Response (Service Result) Data Types

The service result (payload) sent in a response to a Cisco UCS Director REST API request is specified for the operation. The service result can be an operation-specific set of name-value pairs, or it can be formatted as a standard data type for this API, that is, as a report or a JSON object.

How to Use cURL Commands

cURL is a command line tool for getting or sending data using URL syntax. You can use the cURL command to execute a REST API request.

The following sample shows how to execute the userAPISubmitWorkflowServiceRequest API and pass the input values:

curl  -v -X POST -H 'X-Cloupia-Request-Key:5CF4C115F0034B189616B2B8EBA0F220'
-g 'http://172.17.32.75/app/api/rest?formatType=json&opName=
userAPISubmitWorkflowServiceRequest&opData={param0:"TestWorkFlowFromAPI",param1:
{"list":[{"name":"A1","value":"Hello"},{"name":"A2","value":"World"}]},param2:-1}'

The following sample shows how to pass the variable value with space in insecure mode:

curl --insecure -v -X POST -H 'X-Cloupia-Request-Key:C97B881CE6B94DFB930765F7AC408xxx'
-g 'https://172.31.234.127/app/api/rest?formatType=json&opName=
userAPISubmitWorkflowServiceRequest&opData={param0:"AddUCSMvlanv1",param1:{"list":
[{"name":"VLAN%20ID","value":"500"},{"name":"VLAN%20DESC","value":"CURLvlantest"}]},param2:-1}'

Note

To run the command in secure mode, install the CA certificate (cacert) file in your system and use the cert location in curl call using the —cacert curl option.

The following sample shows how to roll back a workflow:

curl --insecure -v -X POST -H 'X-Cloupia-Request-Key:C97B881CE6B94DFB930765F7AC408xxx'
-g 'https://172.31.234.127/app/api/rest?formatType=json&opName=
userAPIRollbackWorkflow&opData={param0:140}'

Note

The -g parameter disables the curl check for nested braces { } [ ]. By default, curl does not allow nested braces in REST calls.

Cisco UCS Director REST API SDK Bundle – Samples

When you download the SDK, you can find the sample Java code in the ucsd-rest-api-sdk-v2/src/com/cisco/cuic/api/examples path.

Example: Retrieving VDCs in a Group Based on a Logged-in User

When provisioning VMs, you have to view a list of VDCs available for a particular group and choose the required VDC. To accomplish this, Cisco UCS Director has to identify the group to which the user belongs to and retrieve a list of VDCs available for the group. Then, you can create the VDC on which the VM is provisioned.

Create a workflow with the following REST APIs in sequence:

1. userAPIGetMyLoginProfile—Retrieve the profile of the logged in user to identify the group to which the user belongs to.

2. userAPIGetAllVDCs—Retrieve a list of VDCs available in the user group.

3. userAPICreateVDC—Create a service request to choose a VDC on which the VM is provisioned.

Procedure

Step 1

Identify the group to which the user belongs to using the userAPIGetMyLoginProfile API.

Request:

/app/api/rest?formatType=json&opName=userAPIGetMyLoginProfile&opData={}

Response:

{"serviceResult":{"userId":"sdk","firstName":null,"lastName":null,"email":"xyz@test.com",
"groupName":"Default Group","groupId":1,"role":"Regular"}, "serviceError":null,
"serviceName":"InfraMgr","opName":"userAPIGetMyLoginProfile"}

In this example, the user sdk belongs to the DefaultGroup group.

Step 2

Retrieve a list of VDCs in the user group using the userAPIGetAllVDCs API.

Request:

/app/api/rest?formatType=json&opName=userAPIGetAllVDCs&opData={}

Response:

{ "serviceResult":{"rows":[{"Cloud":"","vDC_ID":1,"Group":"Default Group","vDC":"Default
vDC","Type":"Standard","Lock_State":"Locked","Total_VMs":82,"Active_VMs":72,"Custom_Categories":0,
"vDC_Description":"","Approvers":"","Status":"Default vDC: Not for new provisioning", "Tag":null},
{"Cloud":"VCenter","vDC_ID":4,"Group":"Default Group", "vDC":"SDKcont1" ,"Type":"Container",
"Lock_State":"Unlocked","Total_VMs":2,"Active_VMs":2,"Custom_Categories":0, "vDC_Description":"",
"Approvers":"","Status":"Error(s):\nNo NIC configuration found.", "Tag":null}],"columnMetaData":
null,"reportParams":{}}, "serviceError":null, "serviceName":"InfraMgr", "opName":"userAPIGetAllVDCs" }

Step 3

Create a service request for choosing the VDC on which the VM is provisioned using the userAPICreateVDC API. An approver approves the service request and the user is notified about the VM provisioning using this VDC. The system policy, computing policy, network policy, storage policy, and the cost model applicable to the VDC are selected. The number of days to wait before deleting an inactive VM is selected. A self-service policy which defines the tasks or actions that can be performed on the VDC is selected.

Request:

/app/api/rest?formatType=json&opName=userAPICreateVDC&opData={param0:{"vdcName":"sdk",
"vdcDescription":"sdk vdc", "cloudName":"VCenter","groupName":1, "approver1":"", "approver2":"",
"vdcSupportEmail":"","vdcCustomerNoticationEmail":"","systemPolicy":"Default System Policy",
"deploymentPolicy":"","slaPolicy":"" , "computingPolicy":"VCenter - Default Computing Policy",
"storagePolicy":"VCenter - Default Storage Policy", "networkPolicy":"VCenter - Default Network
Policy","costModel":"", "isLocked":false,"isDeletable":true,"inactivityPeriodForDeletion":-1,
"selfServiceEndUserPolicy":""}}

Response:

{ "serviceResult":true, "serviceError":null, "serviceName":"InfraMgr", "opName":"userAPICreateVDC" }

Example: Adding a Cisco UCS Manager UUID pool

The following sample provides the XML-based API URL to add a Cisco UCS Manager UUID pool:

<cuicoperationRequest>
<payload>
<![CDATA[
<ucsUuidPool>
<name>Test_UUID_Pool</name>
<descr>Test_UUID_Pool</descr>
<prefix>other</prefix>
<otherPrefix>00000000-0000-0000<otherPrefix>
<accountName>ucsm-248</accountName>
<org>org-root</org>
<firstMACAddress>0000-000000000001</firstMACAddress>
<size>1</size>
</ucsUuidPool>
]]>
</payload>

In this example, ensure that you provide the following details:

- <prefix>—Enter either derived or other.

- <org>—The org must follow the format: org-dn. Where, dn is domain name.

Example: Setup PXE Boot Task

The following sample provides the XML-based API URL to execute setup PXE boot task:

<cuicOperationRequest>
<operationType>SETUP_PXE_BOOT</operationType>
<payload>
<![CDATA[
<SetupPXEBoot>
<!-- Accepts value from the list: NetworkBootManagerList-->
<netwotkBootManager>PXE</netwotkBootManager>
<osType>ESXi6.0</osType>
<serverMACAddress>dd:cc:ff:ff:cc:cc</serverMACAddress>
<!-- Accepts value from the list: IPConfigType-->
<IPConfigType>Static</IPConfigType>
<serverIPAddress>24.45.45.56</serverIPAddress>
<serverNetMask>255.255.255.0</serverNetMask>
<serverHostname>esxi</serverHostname>
<serverGateway>24.45.45.1</serverGateway>
<serverNameserver></serverNameserver>
<manageMentVlanID>0</manageMentVlanID>
<!-- Accepts value from the list: password-->
<rootPassword>cloupia123</rootPassword>
<timeZone>Africa/Abidjan</timeZone>
<additionalParameterList>
<AdditionalParameter>
<paramName>test</paramName>
<paramValue>123</paramValue>
</AdditionalParameter>

</additionalParameterList>
</SetupPXEBoot>
]]>
</payload>
</cuicOperationRequest>

Example: Adding a Storage Policy

The following sample provides the XML-based API URL to add a storage policy with the connectivity type as Simple:

<ucsStoragePolicy>
<policyName>Storage_Policy1</policyName>
<policyDescription>Test Storage Policy</policyDescription> <ucsAcctName>UCSM_70</ucsAcctName>
<orgName>org-root</orgName>
<connectivityType>Simple</connectivityType>
<wwnnPool>node-default</wwnnPool>
<noOfVhba>0</noOfVhba>
<vHBA0Name>fc0</vHBA0Name>
<vSAN>VSAN-EST</vSAN>
<vHBA1Name>fc1</vHBA1Name>
<vSAN_FI_B>VSAN-Add</vSAN_FI_B>
<sanConnPolicy></sanConnPolicy>
</ucsStoragePolicy>

The following sample provides the XML-based API URL to add a storage policy with the connectivity type as Use SAN Connectivity Policy:

<ucsStoragePolicy>
<policyName>Storage_Policy3</policyName>
<policyDescription>Test Storage Policy</policyDescription> <ucsAcctName>UCSM_70</ucsAcctName>
<orgName>org-root</orgName>
<connectivityType>Use SAN Connectivity Policy</connectivityType>
<wwnnPool>node-default</wwnnPool>
<noOfVhba>0</noOfVhba>
<sanConnPolicy>Test</sanConnPolicy>
</ucsStoragePolicy>

Define the connectivity type for adding a storage policy.

- connectivityType—Choose one of the following as the connectivity type: Expert, Simple, No vHBAs, Hardware Inherited, and Use SAN Connectivity Policy. Set the <noOfVhba> as zero when you chose the connectivity type as Simple or Use SAN Connectivity Policy.

Example: Adding a Network Policy

The following sample provides the XML-based API URL to add a network policy with the connectivity type as Use LAN Connectivity Policy:

<cuicOperationRequest>
<payload>
<![CDATA[
<ucsNetworkPolicy>
<vNIC0Label></vNIC0Label>
<vNIC1Label></vNIC1Label>
<policyId></policyId>
<!--Mandatory field. The length of the ID must  be lesser than or equal to 16 characters.
The ID field accepts alpha-numeric value and special characters (_, -, ., ,).-->
<policyName>Net-Test</policyName>
<policyDescription></policyDescription>
<!--Mandatory field.-->
<accountName>UCSM-70</accountName>
<!--Mandatory field.-->
<orgDn>org-root/org-Org-GUReg/org-Org-UGBP2</orgDn>
<dynVNICConnectionPolicy></dynVNICConnectionPolicy>
<!--Mandatory field.-->
<connectivityType>Use LAN Connectivity Policy</connectivityType>
<lanConnPolicy>LAN_CONN_POL</lanConnPolicy>
<!--Mandatory field.-->
<expertNoOfVnics>0</expertNoOfVnics>
</ucsNetworkPolicy>
]]>
</payload>
</cuicOperationRequest>

Define the connectivity type for adding a network policy.

- connectivityType—Choose one of the following as the connectivity type: Expert, Simple, No vNICs, Hardware Inherited, and Use LAN Connectivity Policy. Set the <expertNoOfVnics> as zero when you chose the connectivity type as Use LAN Connectivity Policy.

Example: Modifying a LAN Port Channel

The UcsLanPortChannel (UPDATE) API enables you to perform the following actions:

- edit—To edit the flowCtrlPolicy, adminSpeed, and name.

- addports—To add a new port to an existing lanport channel.

- enableport—To enable all the ports attached to the respective lanport channel.

- disableport—To disable all the ports attached to the respective lanport channel.

The following samples provides the XML-based API URL to execute the above mentioned actions:

edit

<cuicOperationRequest>
<payload>
<![CDATA[
<ucsLanPortChannel>
<accountName>ucsm-70</accountName>
<adminSpeed>1gbps</adminSpeed>
<flowCtrlPolicy>Flow_Contrl</flowCtrlPolicy>
<switchId>A</switchId>
<name>PC01</name>
<portId>1</portId>
<apiAction>edit</apiAction>
</ucsLanPortChannel>
]]>
</payload>
</cuicOperationRequest>

addports

<cuicOperationRequest>
<payload>
<![CDATA[
<ucsLanPortChannel>
<accountName>ucsm-70</accountName>
<switchId>A</switchId>
<name>PC01</name>
<portId>001</portId>
<apiAction>addPorts</apiAction>
<portList>
<accountName>ucsm-70</accountName>
<slotId>1</slotId>
<portId>18</portId>
</portList>
</ucsLanPortChannel>
]]>
</payload>
</cuicOperationRequest>

enableport

<cuicOperationRequest>
<payload>
<![CDATA[
<ucsLanPortChannel>
<accountName>ucsm-70</accountName>
<switchId>A</switchId>
<name>PC01</name>
<portId>1</portId>
<apiAction>enablePort</apiAction>
</ucsLanPortChannel>
]]>
</payload>
</cuicOperationRequest>

disableport

<cuicOperationRequest>
<payload>
<![CDATA[
<ucsLanPortChannel>
<accountName>ucsm-70</accountName>
<switchId>A</switchId>
<name>PC01</name>
<portId>1</portId>
<apiAction>disablePort</apiAction>
</ucsLanPortChannel>
]]>
</payload>
</cuicOperationRequest>

List of Available Cisco UCS Director Reports

In the following table, reports are grouped by context. The same report (with the same reportID) may be used for different contexts, and so may appear in multiple locations in this list.

Note

Report IDs are always single strings without character spaces. Because some of these strings are very long, they are broken across multiple lines within individual table cells below. If you perform an electronic search for a full, exact reportId string, it may not return a result because the break inserts a character space; search instead for a short unique string contained within the full reportId character string.

Context

Report Name

Report ID

Report Type

AWS-EC2 cloud

Summary

SUMMARY-V0

Summary

AWS-EC2 cloud

VMs

VMS-T0

Tabular

AWS-EC2 cloud

Images

IMAGES-T0

Tabular

AWS-EC2 cloud

Deleted VMs

DELETED-VMS-T0

Tabular

AWS-EC2 cloud

Memory

MEMORY-S0

Bar Chart

AWS-EC2 cloud

VPU

CPU-S0

Bar Chart

AWS-EC2 cloud

Disk

DISK-S0

Bar Chart

AWS-EC2 cloud

Trend: Memory

TREND-MEMORY-H0

Trend

AWS-EC2 cloud

Trend: CPU

TREND-CPU-H0

Trend

AWS-EC2 cloud

Trend: CPU Usage

TREND-CPU-USAGE-H0

Trend

AWS-EC2 cloud

Trend: Disk Reads & Writes (bytes)

TREND-DISK-READS-& -WRITES-(BYTES)-H0

Trend

AWS-EC2 cloud

Trend: Disk Reads & Writes (ops)

TREND-DISK-READS-& -WRITES-(OPS)-H0

Trend

AWS-EC2 cloud

Trend: Disk Reads & Writes (ops)

TREND-DISK-READS-& -WRITES-(OPS)-H0

Trend

AWS-EC2 cloud

Trend: Network Usage

TREND-NETWORK-USAGE-H0

Trend

AWS-EC2 cloud

Groups with Most CPU Usage

GROUPS-WITH-MOST -CPU-USAGE-T0

Tabular

AWS-EC2 cloud

VMs With Most Trend:CPU Usage

VMS-WITH-MOST -CPU-USAGE-T0

Tabular

AWS-EC2 cloud

VMs With Over-Utilized CPU Usage

VMS-WITH-OVER- UTILIZED-CPU-USAGE-T0

Tabular

AWS-EC2 cloud

VMs With Under-Utilized CPU Usage

VMS-WITH-UNDER -UTILIZED-CPU-USAGE-T0

Tabular

AWS-EC2 cloud

Volumes

VOLUMES-X1

Tabular with Actions

AWS-EC2 cloud

Snapshots

SNAPSHOTS-X1

Tabular with Actions

AWS-EC2 cloud

Summary

SUMMARY-V1

Summary

AWS-EC2 cloud

SP Status

SP-STATUS-T0

Tabular

AWS-EC2 vm

CPU Usage (percent)

CPU-USAGE-(PERCENT)-S0

Bar Chart

AWS-EC2 vm

Network In

NETWORK-IN-S0

Bar Chart

AWS-EC2 vm

Network Out

NETWORK-OUT-S0

Bar Chart

AWS-EC2 vm

Trend: CPU Usage

TREND-CPU-USAGE-H0

Trend

AWS-EC2 vm

Trend: Disk Reads & Writes (bytes)

TREND-DISK-READS -&-WRITES-(BYTES)-H0

Trend

AWS-EC2 vm

Trend: Disk Reads & Writes (ops)

TREND-DISK-READS -&-WRITES-(OPS)-H0

Trend

AWS-EC2 vm

Network Usage

NETWORK-USAGE-H0

Trend

catalog

Deployability Assessment

DEPLOYABILITY-ASSESSMENT-T45

Tabular

cloud

vDCs

VDCS-T0

Tabular

cloud

Events

EVENTS-T0

Tabular

cloud

Number of Events by Severity

NUMBER-OF-EVENTS -BY-SEVERITY-S0

Bar Chart

cloud

Groups WIth Most Number of VMs

GROUPS-WITH-MOST -NUMBER-OF-VMS-T0

Tabular

cloud

vDCs With Most Number of VMs

VDCS-WITH-MOST -NUMBER-OF-VMS-T0

Tabular

cloud

vDCs With Most CPU Usage

VDCS-WITH-MOST -CPU-USAGE-T0

Tabular

cloud

vDCs With Most Memory Usage

VDCS-WITH-MOST -MEMORY-USAGE-T0

Tabular

cloud

vDCs With Most Disk Usage

VDCS-WITH-MOST -DISK-USAGE-T0

Tabular

cloud, vm

VM Action Requests

VM-ACTION-REQUESTS-X0

Tabular with Actions

compute_chassis

Summary

SUMMARY-V50

Summary

compute_chassis

Servers

SERVERS-T50

Tabular

compute_chassis

Fan Modules

FAN-MODULES-T50

Tabular

compute_chassis

IO Modules

IO-MODULES-T50

Tabular

compute_chassis

Power Supply Units

POWER-SUPPLY-UNITS-T50

Tabular

compute_chassis

Events

EVENTS-T50

Tabular

compute_fbi

Summary

SUMMARY-V50

Summary

compute_fbi

Power Supply Units

POWER-SUPPLY-UNITS-T50

Tabular

compute_fbi

Fans

FANS-T50

Tabular

compute_fbi

Ethernet Ports

ETHERNET-PORTS-X50

Tabular with Actions

compute_fbi

Fibre Channel Ports

FIBRE-CHANNEL-PORTS-X50

Tabular with Actions

compute_fbi

Trend: Ethernet Ports Total Kilo Bytes Transferred/Received

TREND-ETHERNET-PORTS -TOTAL-KILO-BYTES -TRANSFERRED/RECEIVED-H50

Trend

compute_fbi

Trend: Fibre Channel Ports Total Kilo Bytes Transferred/Received

TREND-FIBRE-CHANNEL -PORTS-TOTAL-KILO-BYTES -TRANSFERRED/RECEIVED-H50

Trend

compute_fbi

Trend: CPU Utilization

TREND-CPU-UTILIZATION-H50

Trend

compute_fbi

Trend: Memory

TREND-MEMORY-H50

Trend

compute_fbi

Events

EVENTS-T50

Tabular

compute_fbi_port

Port Summary

PORT-SUMMARY-V50

Summary

compute_server

Local Disks

LOCAL-DISKS-T50

Tabular

compute_server

Memory Units

MEMORY-UNITS-T50

Tabular

compute_server

Processor Units

PROCESSOR-UNITS-T50

Tabular

compute_server

Interface Cards

INTERFACE-CARDS-X50

Tabular with Actions

compute_server

Service Request Details

SERVICE-REQUEST-DETAILS-T50

Tabular

compute_server

Trend: MotherBoard Input Current Received

TREND-MOTHERBOARD -INPUT-CURRENT-RECEIVED-H50

Trend

compute_server

Trend: MotherBoard Input Voltage Received

TREND-MOTHERBOARD -INPUT-VOLTAGE-RECEIVED-H50

Trend

compute_server

Trend: MotherBoard Consumed Power

TREND-MOTHERBOARD -CONSUMED-POWER-H50

Trend

compute_server

Trend: MotherBoard Sens IO Temperature

TREND-MOTHERBOARD -SENS-IO-TEMPERATURE-H50

Trend

compute_server

Trend: MotherBoard Sens Rear Temperature

TREND-MOTHERBOARD -SENS-REAR-TEMPERATURE-H50

Trend

compute_server

Trend: Memory Unit Temperature

TREND-MEMORY-UNIT -TEMPERATURE-H50

Trend

compute_server

Trend: Processor Unit Current

TREND-PROCESSOR-UNIT -CURRENT-H50

Trend

compute_server

Trend: Processor Unit Temperature

TREND-PROCESSOR-UNIT -TEMPERATURE-H50

Trend

compute_server

Summary

SUMMARY-V50

Summary

compute_server

Events

EVENTS-T50

Tabular

compute_server _adapter_unit

DCE Interfaces

DCE-INTERFACES-T50

Tabular

compute_server _adapter_unit

HBAs

HBAS-T50

Tabular

compute_server _adapter_unit

NICs

NICS-T50

Tabular

custom_actions

Add/Edit Tasks

ADD/EDIT-TASKS-X46

Tabular with Actions

datacenter

Storage Accounts

STORAGE-ACCOUNTS-T51

Tabular

datacenter

Top 5 Volume Total-Used Storage

TOP-5-VOLUME-TOTAL -USED-STORAGE-T9999

Tabular

datacenter

Top 5 Lun Total-Used Storage

TOP-5-LUN-TOTAL-USED -STORAGE-T9999

Tabular

datacenter

Summary

SUMMARY-V51

Summary

datacenter

Volumes: Total vs Used

VOLUMES-TOTAL-VS-USED-S51

Bar Chart

datacenter

LUNs: Total vs Used

LUNS-TOTAL-VS-USED-S51

Bar Chart

datacenter

Aggregates: Free vs Used

AGGREGATES-FREE-VS -USED-S51

Pie Chart

datacenter

UCSM Accounts

UCSM-ACCOUNTS-X50

Tabular with Actions

datacenter

Chassis

CHASSIS-T50

Tabular

datacenter

Fabric Interconnects

FABRIC-INTERCONNECTS-T9999

Tabular

datacenter

Server Pools

SERVER-POOLS-T9999

Tabular

datacenter

Summary

SUMMARY-V50

Summary

datacenter

Service Profiles

SERVICE-PROFILES-T9999

Tabular

datacenter

Processor Units

PROCESSOR-UNITS-T9999

Tabular

datacenter

Memory Units

MEMORY-UNITS-T9999

Tabular

datacenter

Local Disks

LOCAL-DISKS-T9999

Tabular

datacenter

IO Modules

IO-MODULES-T9999

Tabular

datacenter

Managed Network Elements

MANAGED-NETWORK- ELEMENTS-X52

Tabular with Actions

datacenter

VTP Status

VTP-STATUS-T52

Tabular

datacenter

Private VLANs

PRIVATE-VLANS-T52

Tabular

datacenter

L2 Neighbors

L2-NEIGHBORS-T52

Tabular

datacenter

Port Profiles

PORT-PROFILES-T52

Tabular

datacenter

VM Network Details

VM-NETWORK-DETAILS-T52

Tabular

datacenter

Host Network Details

HOST-NETWORK-DETAILS-T52

Tabular

datacenter

VSANs

VSANS-T52

Tabular

datacenter

VLANs

VLANS-X52

Tabular with Actions

datacenter

HP Accounts

HP-ACCOUNTS-X50

Tabular with Actions

datacenter

DHCP Log

DHCP-LOG-T50

Tabular

datacenter

PXE Boot Requests

PXE-BOOT-REQUESTS-X50

Tabular with Actions

global

Summary

SUMMARY-V0

Summary

global

Clouds

CLOUDS-T0

Tabular

global

vDCs

VDCS-T0

Tabular

global

Clusters

CLUSTERS-T0

Tabular

global

VMs

VMS-T0

Tabular

global

Host Node Status

HOST-NODE-STATUS-T0

Tabular

global

Host Node Inventory

HOST-NODE-INVENTORY-T0

Tabular

global

Resource Pools

RESOURCE-POOLS-T0

Tabular

global

Events

EVENTS-T0

Tabular

global

Images

IMAGES-T0

Tabular

global

Deleted VMs

DELETED-VMS-T0

Tabular

global

System Health

SYSTEM-HEALTH-T30

Tabular

global

Active VM Distribution

ACTIVE-VM-DISTRIBUTION- BY-CLOUD-S0

Pie Chart

global

Active VMs Public vs Private By Clouds

ACTIVE-VMS-PUBLIC-VS -PRIVATE-CLOUDS-S0

Pie Chart

global

Memory

MEMORY-S0

Bar Chart

global

CPU

CPU-S0

Bar Chart

global

Disk

DISK-S0

Bar Chart

global

Private Cloud Storage Capacity

PRIVATE-CLOUD-STORAGE -CAPACITY-S1

Pie Chart

global

Private Cloud Free Storage

PRIVATE-CLOUD-FREE-STORAGE-S1

Pie Chart

global

Private Cloud Used Storage

PRIVATE-CLOUD-USED-STORAGE-S1

Pie Chart

global

Storage Capacity Per Storage Type

STORAGE-CAPACITY-PER- STORAGE-TYPE-S1

Bar Chart

global

Used Storage Per Storage Type

USED-STORAGE-PER-STORAGE-TYPE-S1

Bar Chart

global

Free Storage Per Storage Type

FREE-STORAGE-PER-STORAGE-TYPE-S1

Bar Chart

global

Top 5 Datastores Most Used

TOP-5-DATASTORES-MOST-USED-S1

Bar Chart

global

Top 5 Datastores Least Used

TOP-5-DATASTORES-LEAST-USED-S1

Bar Chart

global

Number of Events

NUMBER-OF-EVENTS-S0

Bar Chart

global

Trend: Number of Host Nodes

TREND-NUMBER-OF-HOST-NODES-H0

Trend

global

Trend: Memory

TREND-MEMORY-H0

Trend

global

Trend: Storage Capacity, Used & Free

TREND-STORAGE-CAPACITY, -USED-&-FREE-H1

Trend

global

Trend: CPU

TREND-CPU-H0

Trend

global

All VMware Activity

ALL-VMWARE-ACTIVITY-T0

Tabular

global

Summary

SUMMARY-V1

Summary

global

SP Status

SP-STATUS-T0

Tabular

global, cloud

VMs Active vs Inactive

VMS-ACTIVE-VS-INACTIVE-S0

Bar Chart

global, cloud

Trend: Number of VMs

TREND-NUMBER-OF-VMS-H0

Trend

global, cloud

Trend: VM Additions & Deletions

TREND-VM-ADDITIONS-& -DELETIONS-H0

Trend

global_admin

NetAppVolumesTable

NETAPPVOLUMESTABLE-T9999

Tabular

global_admin

NetAppVFilerVolumes Table

NETAPPVFILERVOLUMES TABLE-T9999

Tabular

global_admin

NetAppLunsTable

NETAPPLUNSTABLE-T9999

Tabular

global_admin

NetAppVFilerLunsTable

NETAPPVFILERLUNSTABLE-T9999

Tabular

global_admin

NetAppFilersTable

NETAPPFILERSTABLE-T9999

Tabular

global_admin

NetAppInitiatorGroups Table

NETAPPINITIATORGROUPS TABLE-T9999

Tabular

global_admin

NetAppVFilerInitiator Groups Table

NETAPPVFILERINITIATOR GROUPSTABLE-T9999

Tabular

global_admin

NetAppIPSpacesTable

NETAPPIPSPACESTABLE-T9999

Tabular

global_admin

NetAppVFilersTable

NETAPPVFILERSTABLE-T9999

Tabular

global_admin

NetAppAggregatesTable

NETAPPAGGREGATESTABLE-T9999

Tabular

global_admin

NetAppONTAPAccounts Table

NETAPPONTAPACCOUNTS TABLE-T9999

Tabular

global_admin

NetAppDFMAccounts Table

NETAPPDFMACCOUNTS TABLE-T9999

Tabular

global_admin

NetAppDFMFiler Table

NETAPPDFMFILERTABLE-T9999

Tabular

global_admin

NetAppONTAPFiler Table

NETAPPONTAPFILERTABLE-T9999

Tabular

global_admin

NetAppONTAPvFilers Table

NETAPPONTAPVFILERS TABLE-T9999

Tabular

global_admin

NetAppUnAssignedIP SpacesTable

NETAPPUNASSIGNEDIPSPACES TABLE-T9999

Tabular

global_admin

NetAppInterfacesTable

NETAPPINTERFACESTABLE-T9999

Tabular

global_admin

NetAppVLANPhysical InterfacesTable

NETAPPVLANPHYSICALINTERFACES TABLE-T9999

Tabular

global_admin

NetAppInterfacesvFilers Assigned Table

NETAPPINTERFACESVFILERS ASSIGNEDTABLE-T9999

Tabular

global_admin

NetAppDFMvFilersTable

NETAPPDFMVFILERSTABLE-T9999

Tabular

global_admin

NetAppDfmVolume DatasetTable

NETAPPDFMVOLUMEDATASET TABLE-T9999

Tabular

global_admin

NetAppDfmLUN DatasetTable

NETAPPDFMLUNDATASET TABLE-T9999

Tabular

global_admin

NetAppDfmGroupTable

NETAPPDFMGROUPTABLE-T9999

Tabular

global_admin

NetAppDfmProvision PolicyTable

NETAPPDFMPROVISIONPOLICY TABLE-T9999

Tabular

global_admin

NetAppDfmStorage ServiceTable

NETAPPDFMSTORAGESERVICE TABLE-T9999

Tabular

global_admin

NetAppUnAssigned DatasetTable

NETAPPUNASSIGNEDDATASET TABLE-T9999

Tabular

global_admin

NetAppAssignedDatasetTable

NETAPPASSIGNEDDATASET TABLE-T9999

Tabular

global_admin

NetAppDatasetTable

NETAPPDATASETTABLE-T9999

Tabular

global_admin

NetAppDatasetMember LUN Table

NETAPPDATASETMEMBER LUNTABLE-T9999

Tabular

global_admin

NetAppReourcePoolTable

NETAPPREOURCEPOOLTABLE-T9999

Tabular

global_admin

NetAppGroupAssigned
VFilersTable

NETAPPGROUPASSIGNED VFILERSTABLE-T9999

Tabular

global_admin

Provisioning Policies

PROVISIONING-POLICIES-T48

Tabular

global_admin

Protection Policies

PROTECTION-POLICIES-T48

Tabular

global_admin

Storage Services

STORAGE-SERVICES-T48

Tabular

global_admin

vFiler Templates

VFILER-TEMPLATES-T48

Tabular

global_admin

OnCommand Datasets

ONCOMMAND-DATASETS-T48

Tabular

global_admin

OnCommand Groups

ONCOMMAND-GROUPS-T48

Tabular

global_admin

Resource Pool

RESOURCE-POOL-T48

Tabular

global_admin

UIMenuItemTable

UIMENUITEMTABLE-T9999

Tabular

global_admin

UIOperationTable

UIOPERATIONTABLE-T9999

Tabular

global_admin

Customer Organizations

CUSTOMER-ORGANIZATIONS-X23

Tabular with Actions

global_admin

Customer Organizations

CUSTOMER-ORGANIZATIONS-T23

Tabular

global_admin

Customer Organizations

CUSTOMER-ORGANIZATIONS-T23

Tabular

global_admin

MSP Organizations

MSP-ORGANIZATIONS-X23

Tabular with Actions

global_admin

MSP Organizations

MSP-ORGANIZATIONS-T23

Tabular

global_admin

Login Page Branding

LOGIN-PAGE-BRANDING-X23

Tabular with Actions

global_admin

Login Page Branding

LOGIN-PAGE-BRANDING-T23

Tabular

global_admin

Login Users

LOGIN-USERS-X23

Tabular with Actions

global_admin

Login Users

LOGIN-USERS-T23

Tabular

global_admin

Current Online Users

CURRENT-ONLINE-USERS-X23

Other

global_admin

Virtual Accounts

VIRTUAL-ACCOUNTS-X22

Tabular with Actions

global_admin

Virtual Accounts

VIRTUAL-ACCOUNTS-T22

Tabular

global_admin

Physical Accounts

PHYSICAL-ACCOUNTS-X24

Tabular with Actions

global_admin

Physical Accounts

PHYSICAL-ACCOUNTS-T24

Tabular

global_admin

Catalog

CATALOG-X40

Tabular with Actions

global_admin

UcsOrganizationTable

UCSORGANIZATION TABLE-T9999

Tabular

global_admin

UcsServerTable

UCSSERVERTABLE-T9999

Tabular

global_admin

UcsServiceProfileTable

UCSSERVICEPROFILE TABLE-T9999

Tabular

global_admin

UcsServerPoolTable

UCSSERVERPOOLTABLE-T9999

Tabular

global_admin

UcsBootPolicyTable

UCSBOOTPOLICYTABLE-T9999

Tabular

global_admin

Data Centers

DATA-CENTERS-X24

Tabular with Actions

global_admin

Data Centers

DATA-CENTERS-T24

Tabular

global_admin

Storage Policy

STORAGE-POLICY-X47

Tabular with Actions

global_admin

Network Policy

NETWORK-POLICY-X47

Tabular with Actions

global_admin

vHBA

VHBA-X47

Tabular with Actions

global_admin

vNIC

VNIC-X47

Tabular with Actions

global_admin

Placement Policy

PLACEMENT-POLICY-X47

Tabular with Actions

global_admin

deviceZonesTable

DEVICEZONESTABLE-T9999

Tabular

global_admin

Vendor Validated Designs

VENDOR-VALIDATED- DESIGNS-X24

Tabular with Actions

global_admin

HpServerTable

HPSERVERTABLE-T9999

Tabular

global_admin

Reports Customization

REPORTS-CUSTOMIZATION-X20

Tabular with Actions

global_admin

Amazon Deployment Policy

AMAZON-DEPLOYMENT-POLICY-X41

Tabular with Actions

global_admin

Amazon Deployment Policy

AMAZON-DEPLOYMENT-POLICY-T41

Tabular

global_admin

VMware Deployment Policy

VMWARE-DEPLOYMENT-POLICY-X21

Tabular with Actions

global_admin

VMware Deployment Policy

VMWARE-DEPLOYMENT-POLICY-T21

Tabular

global_admin

Resource Allocation Policy

RESOURCE-ALLOCATION-POLICY-X21

Tabular with Actions

global_admin

Resource Allocation Policy

RESOURCE-ALLOCATION-POLICY-T21

Tabular

global_admin

Rackspace Deployment Policy

RACKSPACE-DEPLOYMENT-POLICY-X41

Tabular with Actions

global_admin

Rackspace Deployment Policy

RACKSPACE-DEPLOYMENT-POLICY-T41

Tabular

global_admin

KVM Deployment Policy

KVM-DEPLOYMENT-POLICY-X41

Tabular with Actions

global_admin

KVM Deployment Policy

KVM-DEPLOYMENT-POLICY-T41

Tabular

global_admin

VMware Network Policy

VMWARE-NETWORK- POLICY-X44

Tabular with Actions

global_admin

VMware Network Policy

VMWARE-NETWORK- POLICY-T44

Tabular

global_admin

Network Provisioning Policy

NETWORK-PROVISIONING- POLICY-X44

Tabular with Actions

global_admin

Network Provisioning Policy

NETWORK-PROVISIONING- POLICY-T44

Tabular

global_admin

VLAN Pool Policy

VLAN-POOL-POLICY-X44

Tabular with Actions

global_admin

VLAN Pool Policy

VLAN-POOL-POLICY-T44

Tabular

global_admin

Virtual Storage Catalog

VIRTUAL-STORAGE- CATALOG-X43

Tabular with Actions

global_admin

Virtual Storage Catalog

VIRTUAL-STORAGE- CATALOG-T43

Tabular

global_admin

VMware Storage Policy

VMWARE-STORAGE- POLICY-X43

Tabular with Actions

global_admin

VMware Storage Policy

VMWARE-STORAGE- POLICY-T43

Tabular

global_admin

VMware Storage Policy

VMWARE-SYSTEM-POLICY-X41

Tabular with Actions

global_admin

VMware Storage Policy

VMWARE-SYSTEM-POLICY-T41

Tabular

global_admin

VMware Computing Policy

VMWARE-COMPUTING- POLICY-X42

Tabular with Actions

global_admin

VMware Computing Policy

VMWARE-COMPUTING- POLICY-T42

Tabular

global_admin

KVM Computing Policy

KVM-COMPUTING-POLICY-X42

Tabular with Actions

global_admin

KVM Computing Policy

KVM-COMPUTING-POLICY-T42

Tabular

global_admin

Cost Model

COST-MODEL-X41

Tabular with Actions

global_admin

Cost Model

COST-MODEL-T41

Tabular

global_admin

Storage Tier Cost Model

STORAGE-TIER-COST-MODEL-X41

Tabular with Actions

global_admin

Storage Tier Cost Model

STORAGE-TIER-COST- MODEL-T41

Tabular

global_admin

OS License

OS-LICENSE-X41

Tabular with Actions

global_admin

OS License

OS-LICENSE-T41

Tabular

global_admin

Network Services Agents

NETWORK-SERVICES- AGENTS-X24

Tabular with Actions

global_admin

Discovered Devices

DISCOVERED-DEVICES-X24

Tabular with Actions

global_admin

Active Modules

ACTIVE-MODULES-X26

Tabular with Actions

global_admin

Active Modules

ACTIVE-MODULES-T26

Tabular

global_admin

Modules

MODULES-X26

Tabular with Actions

global_admin

Modules

MODULES-T26

Tabular

global_admin

Module Snapshots

MODULE-SNAPSHOTS-X26

Tabular with Actions

global_admin

Module Snapshots

MODULE-SNAPSHOTS-T26

Tabular

global_admin

vmwareVSwitchTable

VMWAREVSWITCH TABLE-T9999

Tabular

global_admin

portGroups

PORTGROUPS-T9999

Tabular

global_admin

Workflows

WORKFLOWS-X46

Tabular with Actions

global_admin

User VM Action Policy

USER-VM-ACTION-POLICY-X46

Tabular with Actions

global_admin

Context Workflow Mapping

CONTEXT-WORKFLOW- MAPPING-X46

Tabular with Actions

global_admin

Templates

TEMPLATES-X46

Tabular with Actions

global_admin

Workflow Schedules

WORKFLOW-SCHEDULES-X46

Tabular with Actions

global_admin

Custom Approval Tasks

CUSTOM-APPROVAL-TASKS-X46

Tabular with Actions

global_admin

License

LICENSE-X20

Tabular with Actions

global_admin

tabularlov.system.advanced. property.report

TABULARLOV.SYSTEM.ADVANCED. PROPERTY.REPORT-T9999

Tabular

global_admin

Change Records

CHANGE-RECORDS-T25

Tabular

global_admin

Application Categories

APPLICATION-CATEGORIES-X20

Tabular with Actions

global_admin

System Tasks

SYSTEM-TASKS-X20

Tabular with Actions

global_admin

System Tasks

SYSTEM-TASKS-T20

Tabular

global_admin

LDAP Integration

LDAP-INTEGRATION-X23

Tabular with Actions

global_admin

LDAP Integration

LDAP-INTEGRATION-T23

Tabular

global_admin

Virtual Console Servers

VIRTUAL-CONSOLE-SERVERS-X24

Tabular with Actions

global_admin

Triggers

TRIGGERS-X46

Tabular with Actions

global_admin, group

vDC

VDC-X45

Tabular with Actions

global_admin, group

vDC Service Profiles

VDC-SERVICE-PROFILES-X45

Tabular with Actions

global_admin, group

Catalog

CATALOG-T40

Tabular

group

vDCs

VDCS-T14

Tabular

group

Port Groups

PORT-GROUPS-X14

Tabular with Actions

group

vFilers

VFILERS-X15

Tabular with Actions

group

Servers

SERVERS-X15

Tabular with Actions

group

Service Profiles

SERVICE-PROFILES-X15

Tabular with Actions

group

Service Requests

SERVICE-REQUESTS-X10

Tabular with Actions

group

Archived Service Requests

ARCHIVED-SERVICE- REQUESTS-X10

Tabular with Actions

group

Users

USERS-X13

Tabular with Actions

group

VMs

VMS-T14

Tabular

group

Resource Limits

RESOURCE-LIMITS-T13

Tabular

group

Summary

SUMMARY-V13

Summary

group

Top 5 Failure Reasons

TOP-5-FAILURE-REASONS-T10

Tabular

group

Trend: Network Usage

TREND-NETWORK-USAGE-H14

Trend

group

Trend: CPU Usage

TREND-CPU-USAGE-H14

Trend

group

Trend: Disk Usage

TREND-DISK-USAGE-H14

Trend

group

Trend: Consolidated Resource Usage

TREND-CONSOLIDATED- RESOURCE-USAGE-H14

Trend

group

VMs Active vs Inactive

VMS-ACTIVE-VS-INACTIVE-S13

Bar Chart

group

VLANs

VLANS-X15

Tabular with Actions

group

Resource Accounting

RESOURCE-ACCOUNTING-T12

Tabular

group

Resource Accounting Details

RESOURCE-ACCOUNTING-DETAILS-T12

Tabular

group

Chargeback

CHARGEBACK-T12

Tabular

group

Resource Accounting Details

RESOURCE-ACCOUNTING- DETAILS-T85

Tabular

group

Chargeback

CHARGEBACK-T85

Tabular

group

Current Month Summary

CURRENT-MONTH-SUMMARY-V12

Summary

group

Previous Month Summary

PREVIOUS-MONTH-SUMMARY-V12

Summary

group

Current Month Cost Summary

CURRENT-MONTH-COST- SUMMARY-S12

Pie Chart

group

Previous Month Cost Summary

PREVIOUS-MONTH-COST- SUMMARY-S12

Pie Chart

group

Current Month Top 5 Applications

CURRENT-MONTH-TOP-5 -APPLICATIONS-S12

Pie Chart

group

Previous Month Top 5 Applications

PREVIOUS-MONTH-TOP-5 -APPLICATIONS-S12

Pie Chart

group

Trend: Budget Spending

TREND-BUDGET-SPENDING-H12

Trend

group

Trend: Total Cost

TREND-TOTAL-COST-H12

Trend

group

Trend: VM Cost

TREND-VM-COST-H12

Trend

group

Trend: CPU Cost

TREND-CPU-COST-H12

Trend

group

Trend: Memory Cost

TREND-MEMORY-COST-H12

Trend

group

Trend: Network Cost

TREND-NETWORK-COST-H12

Trend

group

Payment Information

PAYMENT-INFORMATION-X10

Tabular with Actions

group

Customer Funds

CUSTOMER-FUNDS-X10

Tabular with Actions

group

Resource Accounting Details

RESOURCE-ACCOUNTING- DETAILS-T10

Tabular

hostnode

Summary

SUMMARY-V0

Summary

hostnode

VMs

VMS-T0

Tabular

hostnode

Events

EVENTS-T0

Tabular

hostnode

Deleted VMs

DELETED-VMS-T0

Tabular

hp, datacenter

ILO Servers

ILO-SERVERS-X50

Tabular with Actions

hp_server

Server NICs

SERVER-NICS-T50

Tabular

hp_server

Server Memory

SERVER-MEMORY-T50

Tabular

hp_server

Server Processor

SERVER-PROCESSOR-T50

Tabular

hp_server

Server Slots

SERVER-SLOTS-T50

Tabular

HyperV cloud

Trend: Number of Host Nodes

TREND-NUMBER-OF- HOST -NODES-H0

Trend

HyperV cloud

Trend: Memory

TREND-MEMORY-H0

Trend

HyperV cloud

Trend: CPU

TREND-CPU-H0

Trend

HyperV cloud

Summary

SUMMARY-V0

Summary

HyperV cloud

Clusters

CLUSTERS-T0

Tabular

HyperV cloud

Host Node Status

HOST-NODE-STATUS-T0

Tabular

HyperV cloud

Host Node Inventory

HOST-NODE-INVENTORY-T0

Tabular

HyperV cloud

VMs

VMS-T0

Tabular

HyperV cloud

Deleted VMs

DELETED-VMS-T0

Tabular

HyperV cloud

Data Stores

DATA-STORES-T0

Tabular

HyperV cloud

Images

IMAGES-T9999

Tabular

HyperV cloud

Memory

MEMORY-S0

Bar Chart

HyperV cloud

CPU

CPU-S0

Bar Chart

HyperV cloud

Disk

DISK-S0

Bar Chart

HyperV cluster

Summary

SUMMARY-V0

Summary

HyperV cluster

Host Node Status

HOST-NODE-STATUS-T0

Tabular

HyperV cluster

Host Node Inventory

HOST-NODE-INVENTORY-T0

Tabular

HyperV cluster

VMs

VMS-T0

Tabular

HyperV cluster

Events

EVENTS-T0

Tabular

HyperV hostnode

CPU Usage

CPU-USAGE-S0

Bar Chart

HyperV hostnode

CPU Usage(Mhz)

CPU-USAGE(MHZ)-S0

Bar Chart

HyperV hostnode

Memory Usage

MEMORY-USAGE-S0

Bar Chart

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: http://www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)