Integrate with UCS QOS Policy check box
|
Check
the check box to integrate the QoS policy that is defined for the Cisco UCS
account with the device.
When
you are checking this check box, the
UCS Account Name drop-down field appears. Choose the
QoS policy of the UCS account that you want to integrate with the device.
|
Configure Platinum Class check box
|
Check
the check box to configure the parameters for the Platinum class and apply the
class to the device.
To
configure the parameters for the Platinum class, complete the following fields:
-
Platinum Class ACL Name drop-down list—Choose the
access control list (ACL) name to match packets against when you are
configuring a traffic class.
-
Platinum Class QOS Group drop-down list—(Optional)
Choose the QoS group value to match packets against when you are configuring a
traffic class. Values are from 0 to 3.
-
Platinum Class COS drop-down list—(Optional) Choose
the class of service (CoS) value to match packets against when you are
classifying packets into this class. Values are from 0 to 7.
-
Platinum Class MTU field—The maximum transmission
unit (MTU) value for the class.
|
Configure Gold Class check box
|
Check
the check box to configure the parameters for the Gold class and apply the
class to the device.
To
configure the parameters for the Gold class, complete the following fields:
-
Gold Class ACL Name drop-down list—Choose the ACL name to match
packets against when you are configuring a traffic class.
-
Gold Class QOS Group drop-down list—(Optional)
Choose the QoS group value to match packets against when you are configuring a
traffic class. Values are from 0 to 3.
-
Gold Class BW Percentage drop-down list—Choose the
guaranteed percentage of interface bandwidth that is allocated to this class.
-
Gold Class COS drop-down list—(Optional) Choose the
CoS value to match packets against when you are classifying packets into this
class. Values are from 0 to 7.
-
Gold Class MTU field—The MTU value for the class.
|
Configure Silver Class check box
|
Check the check box to configure the parameters for the Silver
class and apply the class to the device.
To
configure the parameters for the Silver class, complete the following fields:
-
Silver Class ACL Name drop-down list—Choose the ACL name to match
packets against when you are configuring a traffic class.
-
Silver Class QOS Group drop-down list—(Optional)
Choose the QoS group value to match packets against when you are configuring a
traffic class. Values are from 0 to 3.
-
Silver Class BW Percentage drop-down list—Choose the
guaranteed percentage of interface bandwidth allocated to this class.
-
Silver Class COS drop-down list—(Optional) Choose
the CoS value to match packets against when you are classifying packets into
this class. Values are from 0 to 7.
-
Silver Class MTU field—The MTU value for the class.
|
Configure Default Class check box
|
Check the check box to configure the parameters for the Default
class and apply the class to the device.
To
configure the parameters for the Default class, complete the following field:
|
Copy Running configuration to Startup configuration
check box
|
Check
the check box to copy the running configuration to the startup configuration.
|
Request Approval check box
|
Check
the check box to request for approval to deliver commands to the device.
|