Configuring Access Ports
This chapter contains the following sections:
Access ports in
switches are used to connect end devices such as workstations and printers.
When configuring an access port, you need to define which VLAN that the port
Cisco UCS Director, you can configure
access ports on the following Cisco network devices:
- Cisco Nexus 3000 Series switches
- Cisco Nexus 5000 Series switches
- Cisco Nexus 7000 Series
- Cisco Nexus 6000 Series switches
- Cisco Nexus 9300 and 9500 Series switches
|| On the menu
Network pane, expand the pod.
||Select the network device that needs to be configured.
interface that you want to configure as an access port.
Configuration dialog box, complete the following fields:
Select Port field
port that you want to configure as an access port.
Access VLAN field
Select and choose a VLAN to which you want to
associate the port to.
Port Type drop-down list
one of the following as the port type for the Spanning Tree Protocol (STP) to
Copy Running configuration to Startup configuration
the check box to copy the running configuration to the startup configuration.