Cisco UCS Director Installation on Microsoft Hyper-V Manager, Release 5.5
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- June 8, 2016
Chapter: Ports
Ports
This appendix contains the following sections:
Cisco UCS Director TCP and UDP Port Usage
This section provides a list of the TCP and UDP ports that Cisco UCS Director uses for connections and communications with external applications or devices.
The following figure shows the network ports used for communication between the Cisco UCS Director appliance and managed devices, ESX servers, Bare Metal Agent, PowerShell Agent, NTP, and Active Directory.
Port List
| Default Port | Protocol | Description |
|---|---|---|
|
22 |
TCP |
SSH |
|
80 |
TCP/UDP |
HTTP |
|
443 |
UDP |
HTTPS |
|
27000/7279/8082 (Mgmt) |
TCP |
Citrix licensing |
|
2598/1494/2112/2513 |
TCP |
Virtual Desktop Agent for Desktops |
|
67/68 |
UDP |
DHCP |
|
389/636 3268/3269 |
TCP/UDP TCP |
Active Directory |
|
53 |
TCP/UDP |
DNS |
|
123 |
TCP/UDP |
NTP |
|
3306 |
TCP/UDP |
MySQL |
|
8787/5900-5964 |
TCP |
Cisco UCS Director + VNC Connectivity |
|
3389 |
TCP/UDP |
Cisco UCS Director + RDP Connectivity |
|
80/443/8080 |
TCP/UDP |
Cisco UCS Director + NetApp Connectivity |
|
80/443 |
UDP |
Cisco UCS Director + Cisco UCS Manager Connectivity |
|
80/443 |
UDP |
Cisco UCS Director + vCenter Connectivity |
|
3389 |
TCP/UDP |
RDP |
|
135/445 |
TCP |
SMB/RPC |
|
88 |
TCP/UDP |
Kerberos |
|
137 |
TCP/UDP |
NetBIOS Name (nbname) |
|
138 |
TCP/UDP |
NetBIOS datagram (nbdatagram) |
|
139 |
TCP |
NetBIOS session (nbsession) |
|
80/443 |
UDP |
Desktop Delivery Controller <--> vCenter |
|
8080 through ICA |
TCP |
Desktop Delivery Controller <--> Virtual Desktops |
|
1494/2598/2512/2513 |
TCP |
Users (Citrix Recvr) <--> Virtual Desktops |
|
389/636 (LDAP Ports) |
TCP/UDP |
Desktop Delivery Controller <--> Active Directory |
|
389/636, 3268/3269, 53 |
TCP/UDP |
Virtual Desktops <--> Active Directory + DNS |
|
5985/5986 |
TCP |
PowerShell Agent <-> Xendesktop through WinRM |
|
43891 |
TCP/UDP |
Cisco UCS Director <--> PowerShell Agent |
|
80/8081 |
TCP |
XenApp |
|
902 |
TCP |
VMwareESXi host management and VM customization and to execute VIX tasks |
|
903 |
TCP |
VMwareESXi host management and VM customization and to execute VIX tasks (for Vmware vCenter releases prior to 5.0) |
Multi-Node Port Requirements
The ports listed in Cisco UCS Director TCP and UDP Port Usage are applicable for both single and multi-node setups.
For a multi-node setup, the following ports need to be opened between the nodes:
-
From the primary and service node(s) to database nodes: port 3306
-
From the primary node to service node(s): ports 80 and 443
Feedback