The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following section:
Managing iLO Server Accounts
Cisco UCS Director supports the HP ILO version 2, 3, and 4. Cisco UCS Director performs auto-discovery of the HP ILO version and manages all infrastructure elements in the server that are associated with the HP account.
Add the pod to which this HP account belongs.
Cisco UCS Director tests the connection to the HP server. If that test is successful, it adds the HP account and discovers all infrastructure elements in the server that are associated with that account, including servers information, slots, processors, memory, and NICs. This discovery process and inventory collection cycle takes approximately five minutes to complete.
The polling interval configured on the System Tasks tab on the window specifies the frequency of inventory collection. For more information about configuring the polling interval, see the Cisco UCS Director Network Devices Management Guide.
Managing HP iLO Reports
All discovered and managed components of HP iLO servers are displayed at the HP account level.
You can view the reports for each of the discovered/added components in the following categories:
You can view the status of the HP server and details about the specific component in the HP server.
Step 1 | Choose . | ||||||||||||
Step 2 | On the Compute page, expand the pod and then click the HP iLO account for which you want to view the report. Cisco UCS Director displays the iLO servers available under the HP account. | ||||||||||||
Step 3 | Click the row in the table for the server that you want to monitor. | ||||||||||||
Step 4 | Click
View
Details.
Cisco UCS Director displays information about the current status of the selected component. Click the tabs in the window for more details about that component. | ||||||||||||
Step 5 | Click on one of
the following tabs to view the status of the server or a specific component in
the server:
|