Data Movement Approval Mode drop-down list
|
Choose one of the following to determine how data movements will be approved:
-
USER_APPROVE
-
AUTO APPROVE
USER APPROVE is the default setting.
|
Max Simultaneous Device Moves field
|
The number of maximum simultaneous device moves permitted. The valid range is 2 to 32.
|
Max Devices Moves Per Dayy field
|
The number of maximum simultaneous device moves permitted per day. The valid range is 2 to 200.
|
Min Initial Workload Period (hrs) field
|
The minimum initial workload period (in hours). The valid range is 2 to the current value.
|
Workload Analysis Period (hrs) field
|
The workload analysis period (in hours). The valid range is 2 to 672.
|
Swap Not Visible Devices drop-down list
|
Choose one of the following:
-
Enable—Permits the FAST controller to use configured but unmasked/unapped devices that are not visible to the host for FAST swaps.
-
Disable—FAST swaps can only happen between devices that belong to storage groups that are associated with a FAST policy.
|
Allow Only Swap drop-down list
|
Choose one of the following:
|
FAST VP Data Movement Mode drop-down list
|
Choose to enable or disable (None) the FAST VP Data Movement Mode. Auto is the default mode.
|
FAST VP Data Relocation Rate field
|
The FAST VP Data Relocation Rate value. The valid range is 1 to 10.
|
Thin Pool Reserved Capacity (%) field
|
The Thin Pool Reserved Capacity (%) ) value. The valid range is 1 to 80.
|
VP Allocation By FAST policy field
|
Choose the Thin Pool Reserved Capacity (%) value. The default value is Enabled.
|
FAST VP Time to Compress (Days) field
|
The FAST VP Time to Compress (Days) value. The valid range is from 40 to 400 days or never.
|
FAST VP Compression Rate field
|
The FAST VP Time to Compress (Days) value. The valid range is from 1 to 10.
|