With VSG check box
|
Check the check box for VSG support.
If checked, enter the information for the Service Network Configuration and Host Network Configuration.
|
Fabric account drop-down list
|
Choose a fabric account.
|
Switch Type drop-down list
|
Choose a switch type.
|
Switch Name drop-down list
|
Choose a switch.
|
Alternate Switch Namedrop-down list
|
Choose an alternate switch name.
|
Service Network Configuration
|
Layer 3 check box
|
This field appears only when the With VSG check box is checked. Check the check box for Layer 3 support.
Note
|
You must complete the required pre-deployment set up for Layer 3 support which includes vpath partition, and service and classifier
network setup. This can be completed by creating and executing an orchestration workflow that contains the following tasks
from the task library:
-
Create Fabric Organization (Create vPath Organization)
-
Create Fabric Partition (Create vPath partition)
-
Create Fabric Network (Create vPath classifier network)
-
AddHostVMKernelPortondvSwitch (Add vmknics to N1kv VEM Cluster)
-
Create Fabric Network (Create vPath Service Network)
|
|
Fabric Organization drop-down list
|
This field appears only when the Layer 3 check box is checked. Choose the fabric organization.
|
Fabric Partition drop-down list
|
This field appears only when the Layer 3 check box is checked. Choose the fabric partition.
|
Fabric Service Network field
|
This field appears only when the Layer 3 check box is checked. Click Select, check the check box of the fabric service network that you want to use and click Select.
|
Mobility Domain Id (HA) field
|
This field is auto-populated when the Auto Select Mobility Domain Id check box is checked. If the check box is unchecked, enter a mobility domain ID.
|
Auto Select Mobility Domain Id check box
|
Check this box to select a mobility domain ID automatically.
|
Host Network Configuration
|
Mobility Domain Id(Service Network + HA) field
|
This field is auto-populated when the Auto Select Mobility Domain Id check box is checked. If the check box is unchecked, enter a mobility domain ID.
Note
|
If it is Layer 2, the Mobility Domain of the service network and corresponding host network must be the same as the service
network, or can be none.
|
|
Auto Select Mobility Domain Id check box
|
Check this box to select a mobility domain ID automatically.
|
Partition Parameters
|
DCI ID field
|
Enter the DCI ID.
|
Extend the partition across the fabric check box
|
Check the check box to enter the partition across the fabric.
|
Service Node IP Address field
|
Enter the IP address for the service node.
|
DNS Server field
|
Enter the DNS server.
|
Secondary DNS Server field
|
Enter the secondary DNS server.
|
Multi Cast Group Address field
|
Enter the multi-cast group address.
|
Profile Name field
|
Click Select to view a list of available profiles. Check the check box of the profile that you want to use and click Select.
|