Cisco UCS Director Administration Guide, Release 6.6

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco UCS Director Administration Guide, Release 6.6

Chapter Title

Managing Integration Settings

Results

Updated:
April 30, 2018

Chapter: Managing Integration Settings

Managing Integration Settings

This chapter contains the following sections:

About Integration Settings

Using this menu, you can perform the following actions in Cisco UCS Director:

  • Monitor application storage information

  • Set up the CMDB integration

  • Manage the OVF

  • Export metering reports

  • View System Logs

Configuration Management Database Integration

The Configuration Management Database (CMDB) is used to track and manage changes in the system. CMDB typically displays ADD, DELETE, or MODIFY event types on resources such as virtual machines (VMs), service requests, groups, and so on.

Setting Up CMBD Integration

Procedure

Step 1

Choose Administration > Integration.

Step 2

On the Integration page, click CMDB Integration Setup.

Step 3

In the CMDB Integration Setup screen, complete the required fields, including the following:

Name Description

Export to FTP Server check box

Check the check box to export change records to an FTP server.

Export Format drop-down list

Choose the type of export format: CSV or XML.

FTP Server field

The FTP server address.

FTP Port field

The FTP server port number.

FTP User field

The FTP user ID.

FTP Password field

The FTP user password.

FTP Export Frequency drop-down list

Choose how often the change records are exported to the FTP server.

FTP File Name field

The filename for the exported change records. The following variables can be used to create new filenames each time that a file is exported to the target FTP server:

MONTH, WEEK, DAY, YEAR, HOUR, MIN, SEC, MLLIS.

Example: XYZ-$DAY-$HOUR-$MIN-$SEC

Test FTP check box

Check the check box to test FTP settings.

Step 4

Click Save.

Metering Data Export

You can export trend data, such as VM resource usage and resource accounting details, by setting up a metering data export to a target server.

Setting Up Metering Data Export

Procedure

Step 1

Choose Administration > Integration.

Step 2

On the Integration page, click Metering Data Export Setup.

Step 3

Complete the fields that are used in setting up the Configuration Management Database (CMDB).

For more information, see Setting Up CMBD Integration.

Step 4

Click Save.

Change Records

Viewing Change Records

You can view a maximum of 1000 records. The reports are listed in descending order, wherein the recent reports are displayed in the top row.

Procedure

Step 1

Choose Administration > Integration.

Step 2

On the Integration page, click Change Records.

System Logs

You can forward system log (syslog) information to configured servers. Each system message is associated with a severity level. You can determine the severity level of the system logs that you want forwarded to the target server.

Setting up System Logs

SUMMARY STEPS

  1. Choose Administration > Integration.
  2. On the Integration page, click Syslogs.
  3. Check the Enable Syslog Forward check box and complete the required fields, including the following:
  4. Click Save.

DETAILED STEPS

Step 1

Choose Administration > Integration.

Step 2

On the Integration page, click Syslogs.

Step 3

Check the Enable Syslog Forward check box and complete the required fields, including the following:

Field Description

Minimum Severity drop-down list

Choose a threshold below which any severity messages are not forwarded to the syslog server.

Primary Syslog Server

Server Address field

The primary server address.

Protocol drop-down list

Choose the protocol: UDP or TCP.

Port field

The port number.

Syslog Message Format drop-down list

Choose the message format: XML or plain text.

Secondary Syslog Server

Server Address field

The secondary server address.

Protocol drop-down list

Choose the protocol: UDP or TCP.

Port field

The port number.

Syslog Message Format drop-down list

Choose the message format: XML or plain text.

Step 4

Click Save.

Storage and OVF Upload

You can configure the storage location for files that are uploaded by the administrator, group administrator, or the end user. The uploaded files can either be stored locally or configured to go to an external NFS share mount point. As an administrator in the system, you can configure the Network File System (NFS) location.

The Upload files feature provides an option for administrators, group administrators, or the end-user (service end-user portal) to upload Open Virtualization Format (OVF) files to the local storage or to an external NFS share mount point. For more details, see the Cisco UCS Director OVF File Upload Guide.

Multiple Language Support

Cisco UCS Director supports the following languages for concurrent display and input:

  • English (United States)

  • Japanese (Japan)

  • Spanish (Latin America)

  • French (France)

  • Korean (Korea)

  • Chinese (China)

  • Russian (Russia)

All input fields support entering text in the user’s language of choice.

As an administrator, you can set a language preference for specific users while you are adding them to the system. For more information, see Adding Users. In addition, each user in the system can select a language for the user interface. For more information, see Setting a Locale for the User Interface

Choosing a Language for Cisco UCS Director

You can choose a language for the Cisco UCS Director user interface.

Procedure

Step 1

Choose Administration > User Interface Settings.

Step 2

On the User Interface Settings page, click Language.

Step 3

From the Language drop-down list, choose a language.

Step 4

Click Save.

Important 

You must restart the system for the language change to take effect.

Setting a Locale for the User Interface

As a user in the system, you can select a specific language for the user interface. This language preference is set only for your login session, and does not impact the language selected for other users.

Procedure

Step 1

Click your user name that is displayed on the top right corner of the screen, and choose Edit My Profile.

Step 2

In the Edit My Profile screen, choose a language from the Language drop-down list.

Step 3

Click Save.

The language in the user interface is changed immediately.

Note 

If the Language drop-down list and Save option is not visible, then you must clear browser cache and launch Cisco UCS Director again.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco