The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
First Published: July 23, 2014
Last Updated: July 23, 2014
Disk usage for partition [systemName] [name] exceeded 70%
This fault occurs when the partition disk usage exceeds 70% but is less than 90%.
If you see this fault, take the following actions:
Step 1 Reduce the partition disk usage to less than 70% by deleting unused and unnecessary files.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
Disk usage for partition [systemName] [name] exceeded 90%
This fault occurs when the partition disk usage exceeds 90%.
If you see this fault, take the following actions:
Step 1 Reduce the partition disk usage to less than 90% by deleting unused and unnecessary files.
Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.
Disk read speed for partition [name] is less than 75 MB/s
Disk read speed for partition [name] is less than 100 MB/s
Disk read speed for partition [name] is less than 125 MB/s
Communication Service configuration can’t be deployed. Error: [configStatusMessage]
This fault typically occurs because Cisco UCS Manager has detected an invalid communication policy confiuration.
If you see this fault, take the following actions:
Step 1 Verify that ports configured across all communication services is unique.
[name] Trustpoint’s cert-chain is invalid, reason: [certStatus].
This fault occurs when certificate status of TrustPoint has become invalid.
[name] Keyring’s certificate is invalid, reason: [certStatus].
This fault occurs when certificate status of Keyring has become invalid.