Cisco UCS Manager VM-FEX for VMware GUI Configuration Guide, Release 2.2

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco UCS Manager VM-FEX for VMware GUI Configuration Guide, Release 2.2

Chapter Title

Configuring a Service Profile with VM-FEX

Results

Updated:
December 12, 2013

Chapter: Configuring a Service Profile with VM-FEX

Configuring a Service Profile with VM-FEX

This chapter includes the following sections:

Modifying the VMwarePassThrough Ethernet Adapter Policy

VM-FEX in high-performance mode has a system-provided VMwarePassThrough adapter policy. Most of the default settings are sufficient. However, you might need different settings than this policy provides to accommodate your particular implementation. If you need different settings, we recommend that you create another Ethernet adapter policy with your specific settings. In particular, you might want to check the following settings to make sure that they work with your particular implementation:

  • Guest OS requirements

    • Transmit queue

    • Receive queue

    • Completion queues

    • Interrupts

  • Maximum number of interfaces per host.

  • Maximum number of interfaces in pass-through mode per host.

For more information about configuring an Ethernet adapter policy, see the Cisco UCS Manager GUI Configuration Guide.


Note

If you have VMs with two or more vCPUS and you have upgraded from earlier versions of VM-FEX for VMware to release 2.1, you need to manually modify the following parameters with the specified values:

  • wq—Set this parameter to 4.

  • comp-queues—Set this parameter to 8.

  • interrupts—Set this parameter to 12.

Configuring Dynamic vNIC Connection Policies

Dynamic vNIC Connection Policy

The dynamic vNIC connection policy determines how the connectivity between VMs and dynamic vNICs is configured. This policy is required for Cisco UCS domains that include servers with VIC adapters on which you have installed VMs and configured dynamic vNICs.


Note

Do not configure dynamic vNICs in a non-VM-FEX environment. If you configure dynamic vNICs in a service profile in a non-VM-FEX environment, the ESX OS installation may lead to a purple screen of death (PSOD).

Ethernet Adapter Policy

Each dynamic vNIC connection policy includes an Ethernet adapter policy and designates the number of vNICs that can be configured for any server associated with a service profile that includes the policy.

For VM-FEX that has all ports on a blade in standard mode, you need to use the VMware adapter policy.

For VM-FEX that has at least one port on a blade in high-performance mode, use the VMwarePassThrough adapter policy or create a custom policy. If you need to create a custom policy, the resources provisioned need to equal the resource requirements of the guest OS that needs the most resources and for which you will be using high-performance mode.

Static vNICs


Note

In a VM-FEX deployment, a VM will attach to a dynamic vNIC without any redundancy. If a server contains more than one VIC adapter, each adapter must have two static vNICs configured.

Server Migration


Note

If you migrate a server that is configured with dynamic vNICs using VMotion, the dynamic interface used by the vNICs fails and notifies you of that failure.

When the server comes back up, assigns new dynamic vNICs to the server. If you are monitoring traffic on the dynamic vNIC, you must reconfigure the monitoring source.

Creating a Dynamic vNIC Connection Policy

Procedure
    Step 1   In the Navigation pane, click the LAN tab.
    Step 2   On the LAN tab, expand LAN > Policies.
    Step 3   Expand the node for the organization where you want to create the policy.

    If the system does not include multitenancy, expand the root node.

    Step 4   Right-click the Dynamic vNIC Connection Policies node and choose Create Dynamic vNIC Connection Policy.
    Step 5   In the Create Dynamic vNIC Connection Policy dialog box, complete the following fields:
    Name Description

    Name field

    The name of the policy.

    This name can be between 1 and 16 alphanumeric characters. You cannot use spaces or any special characters other than - (hyphen), _ (underscore), : (colon), and . (period), and you cannot change this name after the object is saved.

    Note   

    Do not specify "default" as the value for the dynamic vNIC connection policy name. Cisco UCS Manager automatically resolves any empty policy references to "default". Any service profiles or service profile templates with only static vNICS defined will automatically reference the policy "default" when it is present. If you specify “default” for the dynamic vNIC connection policy name, then unexpected dynamic vNICs might be created on those service profiles or service profile templates.

    Description field

    A description of the policy. Cisco recommends including information about where and when to use the policy.

    Enter up to 256 characters. You can use any characters or spaces except ` (accent mark), \ (backslash), ^ (carat), " (double quote), = (equal sign), > (greater than), < (less than), or ' (single quote).

    Number of Dynamic vNICs field

    The number of dynamic vNICs that this policy affects.

    Enter an integer between 0 and 256. The default is 54.

    Note   

    Components of your system might limit this number to fewer than 256 vNICs.

    Adapter Policy drop-down list

    The adapter profile associated with this policy. The profile must already exist to be included in the drop-down list.

    Protection field

    Dynamic vNICs are always protected in Cisco UCS, but this field allows you to select a preferred fabric, if any. You can choose one of the following:

    • Protected Pref A—Cisco UCS attempts to use fabric A but fails over to fabric B if necessary

    • Protected Pref B—Cisco UCS attempts to use fabric B but fails over to fabric A if necessary

    • Protected—Cisco UCS uses whichever fabric is available
    Step 6   Click OK.
    Step 7   If a confirmation dialog box appears, click Yes.

    Changing a Dynamic vNIC Connection Policy

    Procedure
      Step 1   In the Navigation pane, click the LAN tab.
      Step 2   On the LAN tab, expand LAN > Policies.
      Step 3   Expand the node for the organization that contains the policy that you want to change.

      If the system does not include multitenancy, expand the root node.

      Step 4   Expand the Dynamic vNIC Connection Policies node and click the policy that you want to change.
      Step 5   In the Work pane, click the General tab.
      Step 6   Change one or more of the following fields:
      Name Description

      Description field

      A description of the policy. Cisco recommends including information about where and when to use the policy.

      Enter up to 256 characters. You can use any characters or spaces except ` (accent mark), \ (backslash), ^ (carat), " (double quote), = (equal sign), > (greater than), < (less than), or ' (single quote).

      Number of Dynamic vNICs field

      The number of dynamic vNICs that this policy affects.

      Enter an integer between 0 and 256. The default is 54.

      Note   

      Components of your system might limit this number to fewer than 256 vNICs.

      Adapter Policy drop-down list

      The adapter profile associated with this policy. The profile must already exist to be included in the drop-down list.

      You cannot change the other properties of the policy, such as the Name field.

      Step 7   Click Save Changes.
      Step 8   If a confirmation dialog box displays, click Yes.

      Deleting a Dynamic vNIC Connection Policy

      You can delete a dynamic vNIC connection policy.

      Procedure
        Step 1   In the Navigation pane, click the LAN tab.
        Step 2   On the LAN tab, expand LAN > Policies > Organization_Name.
        Step 3   Expand the Dynamic vNIC Connection Policies node.
        Step 4   Right-click the policy that you want to delete and choose Delete.
        Step 5   If a confirmation dialog box displays, click Yes.

        Viewing Dynamic vNIC Properties in a VM

        You can view dynamic vNIC properties in a VM.

        Before You Begin

        The VM must be operational.

        Procedure
          Step 1   In the Navigation pane, click the VM tab.
          Step 2   On the VM tab, expand All > VMware.
          Step 3   Expand Virtual Machines.
          Step 4   Expand the virtual machine that contains the dynamic vNIC.
          Step 5   Choose the dynamic vNIC.
          Step 6   In the Work pane, click the General tab.

          In the Properties area, the vNIC properties appear.

          Configuring the VM Lifecycle Policy

          VM Lifecycle Policy

          The VM lifecycle policy determines how long Cisco UCS Manager retains offline VMs and offline dynamic vNICs in its database. If a VM or dynamic vNIC remains offline after that period, Cisco UCS Manager deletes the object from its database.

          All virtual machines (VMs) on Cisco UCS servers are managed by vCenter. Cisco UCS Manager cannot determine whether an inactive VM is temporarily shut down, has been deleted, or is in some other state that renders it inaccessible. Therefore, Cisco UCS Manager considers all inactive VMs to be in an offline state.

          Cisco UCS Manager considers a dynamic vNIC to be offline when the associated VM is shut down, or the link between the fabric interconnect and the I/O module fails. On rare occasions, an internal error can also cause Cisco UCS Manager to consider a dynamic vNIC to be offline.

          The default VM and dynamic vNIC retention period is 15 minutes. You can configure a retention period of between 1 minute and 7200 minutes (2 days).


          Note

          The VM database displayed by Cisco UCS Manager is for information and monitoring only. You cannot manage VMs through Cisco UCS Manager. If you delete a VM from the Cisco UCS Manager database, the VM is not deleted from the server or from vCenter.

          Configuring the VM Lifecycle Policy

          You can configure the VM lifecycle policy.

          Procedure
            Step 1   In the Navigation pane, click the VM tab.
            Step 2   On the VM tab, expand the All node.
            Step 3   On the VM tab, click VMWare.
            Step 4   In the Work pane, click the Life Cycle Policy tab.
            Step 5   In the Life Cycle Policy area, complete the following fields:
            Name Description

            VM Retention field

            The period of time that Cisco UCS Manager retains an offline VM in its database. If a VM remains offline after that period, Cisco UCS Manager deletes the VM from its database. This can be one of the following:

            • 1 Min

            • 1 Hour

            • 1 Day

            • other—Cisco UCS Manager displays the Minutes field that allows you to specify a custom retention time.

            Minutes field

            Enter an integer between 1 and 7200 minutes (or 5 days).

            vNIC Retention field

            The period of time that Cisco UCS Manager retains an offline dynamic vNIC in its database. If a dynamic vNIC remains offline after that period, Cisco UCS Manager deletes the dynamic vNIC from its database. This can be one of the following:

            • 1 Min

            • 1 Hour

            • 1 Day

            • other—Cisco UCS Manager displays the Minutes field that allows you to specify a custom retention time.

            Minutes field

            Enter an integer between 1 and 7200 minutes (or 5 days).

            Step 6   Click Save Changes.

            Creating a BIOS Policy for VM-FEX in High-Performance Mode

            For VM-FEX in high performance mode, you must configure specific BIOS settings.


            Note

            pushes BIOS configuration changes through a BIOS policy or default BIOS settings to the Cisco Integrated Management Controller (CIMC) buffer. These changes remain in the buffer and do not take effect until the server is rebooted.

            We recommend that you verify the support for BIOS settings in the server that you want to configure. Some settings, such as Mirroring Mode for RAS Memory, are not supported by all Cisco UCS servers.

            We recommend that you name this BIOS policy as VMwarePassThru so that you can identify it as being used for VM-FEX in high-performance mode.

            You must enable these specific parameters in the following BIOS settings:

            • Processor—Enable Virtual Technology (VT) and Direct Cache Access.

              Note

              You must enable VT if you intend to run 64-bit VMs on the ESX/ESXi host. An ESX/ESXi host will not run 64-bit VMs unless VT is enabled.

            • Intel Directed IO—Enable the following parameters:

              • VT for Directed IO

              • Interrupt Remap

              • Coherency Support

              • ATS Support

              • Pass Through DMA Support

            Configure the remaining BIOS settings, as appropriate.

            For more information, see the Cisco UCS Manager GUI Configuration Guide.

            Was this Document Helpful?

            FeedbackFeedback

            Contact Cisco