Software Advisory Notice

Available Languages

Download Options

  • PDF     (418.6 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (39.4 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (61.2 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:April 30, 2018

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Dear Cisco Customer,

 

Cisco engineering has identified the following software issues with the release that you have selected that may affect your use of this software. Please review the Software Advisory notice here to determine if the issues apply to your environment. You may proceed to download this software if you have no concerns with the issue described.

 

For more comprehensive information about what is included in this software, refer to the Cisco software Release Notes, available from the Product Selector tool. From this page, select the product you are interested in. Release Notes are under "General Information" on the product page.

 

Affected Software and Replacement Solution for CSCvj18863

Software Type

Software Affected

Software Solution

Cisco NX-OS Software

Version:

3.0(1a)

 

Affected Images:

storfs-packages-3.0.1a-29499.tgz

Version:

To be available with 3.0(1b)

 

Replacement Images:

To be available

 

Reason for Advisory:

This software advisory addresses one software issue.

 

CSCvj18863

One or more nodes may panic during or after an upgrade to 3.0(1a).

 

Affected Platforms:

All HX Converged Nodes

 

Symptom:

During or after an upgrade to 3.0(1a), the cluster may experience one or more nodes restarting due to a SW panic. 

 
Conditions: 
1.       Converged nodes being upgraded to 3.0(1a).  (Does not apply to new installs of 3.0(1a).
2.       The cluster, in its lifetime, must have experienced an auto-heal (rebalance due to caching device or node failure) or expansion event.
 
Workaround: Please contact Cisco TAC for workaround to recover from this situation and prevent it from happening again.
 
More Info: None.
 

 

 

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products