Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v4 CPUs

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: October 21, 2016

Technical Specifications

This chapter contains the following section:

Physical Specifications

Table 1. Cisco UCS B260 M4 Blade Server
Specification	Value
Height	1.95 inches (49.5 mm)
Width	16.50 inches (419.1 mm)
Depth	25.5 inches (647.7mm)
Weight	34.5 lbs (15.65 kg) The system weight listed here is an estimate for a fully configured system and will vary depending on peripheral devices installed.

Table 2. Cisco UCS B460 M4 Blade Server
Specification	Value
Height	4.04 inches (102.6 mm)
Width	16.50 inches (419.1 mm)
Depth	25.5 inches (647.7 mm)
Weight	67.4 lbs (30.5 kg) The system weight listed here is an estimate for a fully configured system and will vary depending on peripheral devices installed.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)