Cisco IMC Firmware
Note |
If you are running CIMC version 2.2.x, first upgrade to version 2.3.2 and then upgrade to 3.2.x. |
You can manage the following firmware components from a single page in the web UI:
-
Adapter firmware —The main operating firmware, consisting of an active and a backup image, can be installed from different interfaces such as: -
Host Upgrade Utility (HUU)
-
Web UI — Local and remote protocols
-
XML API — Remote protocols
-
-
Bootloader firmware—The bootloader firmware cannot be installed from the Cisco IMC. You can install this firmware using the Host Upgrade Utility.
Firmware for the following individual components can be updated:
-
BMC
-
BIOS
-
CMC
Firmware for the Hard Disk Drive (HDD) can also be installed from the same interfaces as the adapter firmware mentioned above.