Cisco Host Upgrade Utility 2.0 User Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco Host Upgrade Utility 2.0 User Guide

Chapter Title

Updating the Firmware on Cisco UCS C-Series Servers

Results

Updated:
September 18, 2016

Chapter: Updating the Firmware on Cisco UCS C-Series Servers

Updating the Firmware on Cisco UCS C-Series Servers

This chapter includes the following topics:

Upgrading the Firmware on a Cisco UCS C-Series Server Using the HUU


Important
After upgrading the Cisco IMC firmware, you must check the compatibility matrix to verify if the drivers are compliant with the upgraded version of Cisco IMC. If the driver versions are non-compliant, you must upgrade the driver versions to match the Cisco IMC version.

The Hardware and Software Interoperability Matrix is available here:

http://www.cisco.com/en/US/products/ps10477/prod_technical_reference_list.html

You can use the HUU ISO to upgrade components of the server from the host locally with a writable disk (DVD or CD), or remotely by mounting the HUU ISO as a virtual device. The following procedures explain how to upgrade the firmware using the HUU:

Downloading and Preparing the ISO for Upgrade

Procedure

Step 1

Download the HUU ISO file:

  1. Navigate to the following URL: http://www.cisco.com/cisco/software/navigator.html.

  2. In the middle column, click Servers – Unified Computing.

  3. In the right-hand column, click Cisco UCS C-Series Rack-Mount Standalone Server Software.

  4. Choose the name of your model of server in the right column.

  5. Click Unified Computing System (UCS) Server Firmware.

  6. Choose the release number.

  7. Click Download to download the ucs-server platform-huu-version_number.iso file.

  8. Enter your credentials in the login screen.

  9. Continue through the subsequent screens to accept the license agreement and browse to a location where you want to save the file.

  10. Click Download.

    ISO bundle downloads to the chosen location.
Step 2

If you want to prepare the ISO for a local upgrade, complete this step; Otherwise, go to Step 3.

  1. Burn the ISO image onto a writable disk (CD).

  2. Connect a VGA monitor and USB keyboard to the Cisco C-Series server.

  3. Insert the disk into the USB DVD drive of the Cisco C-Series server.

  4. Perform one of the following updating the firmware procedures depending on the firmware components that you want to upgrade.

Step 3

Prepare the ISO for a remote upgrade using the KVM Console.

  1. Use a browser to connect to the Cisco IMC GUI software on the server that you are upgrading.

  2. in the address field of the browser, enter the Cisco IMC IP address for that server, and then enter your username and password.

  3. Click Launch KVM Console on the toolbar. to launch the KVM Console.

    Note 

    Select the server node on which you want to boot the HUU.

  4. In the KVM Console, click the Virtual Media.

  5. Click Add Image and click the ucs-server-name-huu-version_number.iso file.

  6. In the Client View area, in the Mapped column, check the check box for the ISO file that you added and then wait for mapping to complete.

  7. After the ISO file appears as a mapped remote device, perform one of the following procedures depending on the firmware components that you want to upgrade.

Updating Firmware Using the Update All Option

Procedure
Step 1

Boot the server and press F6 when prompted to open the Boot Menu screen.

Step 2

In the Boot Menu screen, choose the prepared ISO:

  • For a local upgrade, choose the physical or externally connected CD/DVD device and then press Enter.
  • For a remote upgrade, choose Cisco vKVM-Mapped vDVD1.22, and press Enter.

The server boots from the selected device.

Step 3

After the HUU boots, Cisco End User License Agreement (EULA) appears, read the EULA and click:

  • I Agree to agree with the license agreement and proceed with the update.
  • I Disagree to cancel.
    Note 

    When you choose I Disagree, it cancel the upgrade and reboots the host.

After you accept the EULA, when the Cisco Host Upgrade Utility window appears with a list of all the components that are available for update.

Step 4

If you want to update all the listed components, click Update all.

  • Enabling Cisco IMC Secure Boot confirmation dialog box appears.

    Note 

    This message appears for M3 servers only and only if the secure boot is not already enabled.

Step 5

Read the content on the confirmation box carefully and click Yes, if you want to go ahead to update the firmware and enable Cisco IMC secure boot.

Note 

  • If you are updating from a version below 2.0(x) to 2.0(x), when you click YES both the active and the backup versions of Cisco IMC will be updated to 2.0(x).

  • During update the KVM connection will be lost, you have to reconnect to view the progress of the updates.

For more information on Cisco IMC secure boot, refer to the Introduction to Cisco IMC Secure Boot section in the Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 2.0(1).

Step 6

Reboot the server to apply firmware changes.

Updating the Firmware of Specific Components

The following procedure explains how update the firmware of individual components:

Procedure
Step 1

If you want update specific components from the list, choose the components that you want to update.

If you want to downgrade the secure adapter update firmware, complete steps 2 through 4 below. Else continue to step 5.

Step 2

To downgrade the secure adapter update firmware, map the HUU and allow it to boot.

Step 3

On the virtual KVM Console, wait for the message 'Loading firmware tools' to display, when the HUU boots up.

Step 4

Disable enable-security-version-check once you see the 'Loading firmware tools' message.

  1. From the Cisco IMC command line interface, run the command scope cimc->scope adapter-secure-update->enable-security-version-check yes/no/status.

  2. From the Cisco IMC web UI, log on to the Utilities tab.

  3. From the XML API, enter the following data:

    Request: 

    
<configConfMo cookie='1458615470/be0d9210-2e9a-1e9a-8004-816d1e1b0ff4' 
 inHierarchical='false' dn='sys/rack-unit-1'> 
  <inConfig> 
    <computeRackUnit dn='sys/rack-unit-1' adaptorSecureUpdate='Disabled'/>
  </inConfig>
</configConfMo><IP>/nuova

    Response: 

    
<configConfMo dn="sys/rack-unit-1" cookie="1474315600/b51b2682-3ce2-1ce2-8038-c4ae729d8b18" 
 response="yes">
 <outConfig>
  <computeRackUnit dn="sys/rack-unit-1" adminPower="policy" availableMemory="196608" 
   model="UCSC-C240-M4L" memorySpeed="1866" name="UCS C240 M4L" numOfAdaptors="1" 
   numOfCores="12" numOfCoresEnabled="12" numOfCpus="2" numOfEthHostIfs="2" numOfFcHostIfs="2" 
   numOfThreads="24" operPower="on" originalUuid="0CA8BC15-2499-46F2-BFFE-686B224AB52E" 
   presence="equipped" serverId="1" serial="FCH1927V0FC" totalMemory="196608" usrLbl="" 
   uuid="0CA8BC15-2499-46F2-BFFE-686B224AB52E" vendor="Cisco Systems Inc" 
   cimcResetReason="ac-cycle" adaptorSecureUpdate="Disabled" status="modified" >
    </computeRackUnit>
 </outConfig>
</configConfMo>
Step 5

Click Update to return to the update process.

Note 

  • We recommend you to update the firmware on all components using the Update all option, unless you want to specifically update the firmware of a component.

  • When you update the firmware of one of the following three components: BMC, BIOS, or CMC, we recommend that you also update the firmware of the other two components.

  • If you update the BMC firmware, click Exit and then Ok to activate the BMC firmware.

  • If you choose to update BMC and any other component with it and if you have not chosen BIOS, then on exit, you will be prompted to update the Chassis Firmware, click Yes in the confirmation box to update the chassis firmware.

Important 

On the S3260 servers, when you click Update or Update all to update the chassis components of CMC1 and CMC2 simultaneously, the update on the second triggering server component is skipped, and the subsequent component is updated.

This initiates the update and the status of the update is displayed in the Update Status column. You can also view a more detailed log of a series of activities and statuses that are involved while updating the firmware in the Execution Logs section.

Step 6

Click Exit to exit from the HUU.

Note 

After clicking Exit you must wait for a few minutes before the server automatically powers up, indicating the completion of updating and activating of the new firmware.

Note 

If you have updated the BMC and not the BIOS, when you click Exit, BMC gets activated and you lose connectivity to the BMC and KVM.

Updating the HDD Firmware

The following procedure provides steps to update the HDD firmware:

Procedure
Step 1

If you want to update the firmware of the hard disk of a server, click Update HDD Firmware. A window displays a list of hard disk drives on the server that support new firmware. Hard disk drives that do not support firmware upgrades are not listed.

Important 

Updating the firmware of the hard disk drive could result in data loss. Cisco recommends that you take a complete system backup prior to updating the firmware.

  1. To update the firmware of all the hard disks, click Update All.

    With this option, HDDs with the latest firmware installed are not updated.

  2. To update a specific HDD, choose the HDD and click Update.

Step 2

Reboot the server to apply firmware changes.

Verifying the Update Status and Saving Logs

The following procedure provides steps to verify the last update and save logs:

Procedure
Step 1

After you have updated the firmware, boot the server back into HUU ISO, and click Last Update Verify.

This action compares the previously updated firmware version for each component that was updated using the HUU with the current version of the firmware on the components and provides the status of the update.

Step 2

If you want to save the log files of the update status for later use, click Save Logs.

Log files that contain a detailed status of the update are saved to an external USB device that is connected to the server physically or through the KVM vMedia.

Note 

If an error occurs while updating the firmware, you are prompted to save the error log. Click Save Logs to save the log to an externally connected USB. This log can be used for identifying the cause of the error and troubleshooting.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco