Explore Cisco
How to Buy

Have an account?

  •   Personalized content
  •   Your products and support

Need an account?

Create an account

Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for C3X60 Servers

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for C3X60 Servers

Chapter Title

Managing Certificates

Results

Updated:
September 17, 2016

Chapter: Managing Certificates

Managing Certificates

This chapter includes the following sections:

Managing the Server Certificate

You can generate a certificate signing request (CSR) to obtain a new certificate, and you can upload the new certificate to the Cisco IMC to replace the current server certificate. The server certificate may be signed either by a public Certificate Authority (CA), such as Verisign, or by your own certificate authority. The generated certificate key length is 2048 bits.


Note

Before performing any of the following tasks in this chapter, ensure that the Cisco IMC time is set to the current time.

Procedure
    Step 1   Generate the CSR from the Cisco IMC.
    Step 2   Submit the CSR file to a certificate authority that will issue and sign your certificate. If your organization generates its own self-signed certificates, you can use the CSR file to generate a self-signed certificate.
    Step 3   Upload the new certificate to the Cisco IMC.
    Note   

    The uploaded certificate must be created from a CSR generated by the Cisco IMC. Do not upload a certificate that was not created by this method.

    Generating a Certificate Signing Request

    Before You Begin

    • You must log in as a user with admin privileges to configure certificates.

    • Ensure that the Cisco IMC time is set to the current time.

    Procedure
      Step 1   In the Navigation pane, click the Admin menu.
      Step 2   In the Admin menu, click Certificate Management.
      Step 3   In the Actions area, click the Generate New Certificate Signing Request link.

      The Generate New Certificate Signing Request dialog box appears.

      Step 4   In the Generate New Certificate Signing Request dialog box, update the following properties:
      Name Description

      Common Name field

      The fully qualified name of the Cisco IMC.

      By default the CN of the servers appears in CXXX-YYYYYY format, where XXX is the model number and YYYYYY is the serial number of the server.

      When you upgrade to latest version, CN is retained as is.

      Organization Name field

      The organization requesting the certificate.

      Organization Unit field

      The organizational unit.

      Locality field

      The city or town in which the company requesting the certificate is headquartered.

      State Name field

      The state or province in which the company requesting the certificate is headquartered.

      Country Code drop-down list

      The country in which the company resides.

      Email field

      The email contact at the company.

      Self Signed Certificate check box

      Generates a Self Signed Certificate.
      Warning    After successful certificate generation, the Cisco IMC Web GUI restarts. Communication with the management controller may be lost momentarily and you will need to re-login.
      Note   

      If enabled, CSR is generated, signed and uploaded automatically.

      Note   

      If Self-signed certificate is enabled, ignore steps 5 and 6.

      Step 5   Click Generate CSR.

      The Opening csr.txt dialog box appears.

      Step 6   Perform any one of the following steps to manage the CSR file, csr.txt:
      1. Click Open With to view csr.txt.
      2. Click Save File and then click OK to save csr.txt to your local machine.
      What to Do Next

      • Submit the CSR file to a certificate authority that will issue and sign your certificate. If your organization generates its own self-signed certificates, you can use the CSR file to generate a self-signed certificate.

      • Ensure that the certificate is of type Server.

      Creating a Self-Signed Certificate

      As an alternative to using a public Certificate Authority (CA) to generate and sign a server certificate, you can operate your own CA and sign your own certificates. This section shows commands for creating a CA and generating a server certificate using the OpenSSL certificate server running on Linux. For detailed information about OpenSSL, see http:/​/​www.openssl.org.

      Note

      These commands are to be entered on a Linux server with the OpenSSL package, not in the Cisco IMC.

      Before You Begin

      • Obtain and install a certificate server software package on a server within your organization.

      • Ensure that the Cisco IMC time is set to the current time.

      Procedure
         Command or ActionPurpose
        Step 1 openssl genrsa -out CA_keyfilename keysize


        Example: 
        # openssl genrsa -out ca.key 2048
         
        This command generates an RSA private key that will be used by the CA.
        Note    To allow the CA to access the key without user input, do not use the -des3 option for this command.

        The specified file name contains an RSA key of the specified key size.

         
        Step 2 openssl req -new -x509 -days numdays -key CA_keyfilename -out CA_certfilename


        Example: 
        # openssl req -new -x509 -days 365 -key ca.key -out ca.crt
         

        This command generates a new self-signed certificate for the CA using the specified key. The certificate is valid for the specified period. The command prompts the user for additional certificate information.

        The certificate server is an active CA.

         
        Step 3 echo "nsCertType = server" > openssl.conf


        Example: 
        # echo "nsCertType = server" > openssl.conf
         

        This command adds a line to the OpenSSL configuration file to designate the certificate as a server-only certificate. This designation is a defense against a man-in-the-middle attack, in which an authorized client attempts to impersonate the server.

        The OpenSSL configuration file openssl.conf contains the statement "nsCertType = server".

         
        Step 4 openssl x509 -req -days numdays -in CSR_filename -CA CA_certfilename -set_serial 04 -CAkey CA_keyfilename -out server_certfilename -extfile openssl.conf


        Example: 
        # openssl x509 -req -days 365 -in csr.txt -CA ca.crt -set_serial 04
-CAkey ca.key -out myserver05.crt -extfile openssl.conf
         

        This command directs the CA to use your CSR file to generate a server certificate.

        Your server certificate is contained in the output file.

         
        Step 5 openssl x509 -noout -text -purpose -in <cert file>


        Example: 
        openssl x509 -noout -text -purpose -in <cert file>
                  		Verifies if the generated certificate is of type Server.
        Note   

        If the values of the fields Server SSL and Netscape SSL server are not yes, ensure that openssl.conf is configured to generate certificates of type server.

         
        Step 6If the generated certificate does not have the correct validity dates, ensure the Cisco IMC time is set to the current time, and regenerate the certificate by repeating steps 1 through 5.   (Optional) Certificate with the correct validity dates is created.  

        This example shows how to create a CA and to generate a server certificate signed by the new CA. These commands are entered on a Linux server running OpenSSL. 

        # /usr/bin/openssl genrsa -out ca.key 2048
Generating RSA private key, 2048 bit long modulus
.............++++++
.....++++++
e is 65537 (0x10001)
# /usr/bin/openssl req -new -x509 -days 365 -key ca.key -out ca.crt
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [GB]:US
State or Province Name (full name) [Berkshire]:California
Locality Name (eg, city) [Newbury]:San Jose
Organization Name (eg, company) [My Company Ltd]:Example Incorporated
Organizational Unit Name (eg, section) []:Unit A
Common Name (eg, your name or your server's hostname) []:example.com
Email Address []:admin@example.com
# echo "nsCertType = server" > openssl.conf
# /usr/bin/openssl x509 -req -days 365 -in csr.txt -CA ca.crt -set_serial 01 -CAkey ca.key -out server.crt -extfile openssl.conf
Signature ok
subject=/C=US/ST=California/L=San Jose/O=Example Inc./OU=Unit A/CN=example.com/emailAddress=john@example.com
Getting CA Private Key
#
        What to Do Next

        Upload the new certificate to the Cisco IMC.

        Creating a Self-Signed Certificate Using Windows

        Before You Begin

        • You must log in as a user with admin privileges to configure certificates.

        • Ensure that the Cisco IMC time is set to the current time.

        Procedure
          Step 1   Open IIS Manager and navigate to the level you want to manage.
          Step 2   In the Features area, double-click Server Certificate.
          Step 3   In the Action pane, click Create Self-Signed Certificate.
          Step 4   On the Create Self-Signed Certificate window, enter name for the certificate in the Specify a friendly name for the certificate field.
          Step 5   Click Ok.
          Step 6   (Optional)If the generated certificate does not have the correct validity dates, ensure the Cisco IMC time is set to the current time, and regenerate the certificate by repeating steps 1 through 5. Certificate with the correct validity dates is created.

          Uploading a Server Certificate

          You can either browse and select the certificate to be uploaded to the server or copy the entire content of the signed certificate and paste it in the Paste certificate content text field and upload it.

          Before You Begin

          • You must log in as a user with admin privileges to upload a certificate.

          • The certificate file to be uploaded must reside on a locally accessible file system.

          • Ensure that the generated certificate is of type server.


          Note

          You must first generate a CSR using the Cisco IMC Certificate Management menu, and you must use that CSR to obtain the certificate for uploading. Do not upload a certificate that was not obtained by this method.

          Procedure
            Step 1   In the Navigation pane, click the Admin menu.
            Step 2   In the Admin menu, click Certificate Management.
            Step 3   In the Actions area, click Upload Server Certificate.

            The Upload Certificate dialog box appears.

            Step 4   In the Upload Certificate dialog box, update the following properties:
            Name Description

            File field

            The certificate file you want to upload.

            Browse button

            Opens a dialog box that allows you to navigate to the appropriate certificate file.

            Paste Certificate content radio button

            Opens a dialog box that allows you to copy the entire content of the signed certificate and paste it in the Paste certificate content text field.

            Note   

            Ensure the certificate is signed before uploading.

            Upload Certificate button

            Allows you to upload the certificate.

            Step 5   Click Upload Certificate.

            Was this Document Helpful?

            FeedbackFeedback

            Contact Cisco