Cisco UCS Integrated Management Controller CLI Configuration Guide for S3260 Storage Servers, Release 3.0

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco UCS Integrated Management Controller CLI Configuration Guide for S3260 Storage Servers, Release 3.0

Chapter Title

Viewing Server Properties

Results

Updated:
December 13, 2016

Chapter: Viewing Server Properties

Viewing Server Properties

This chapter includes the following sections:

Viewing Server Properties

Procedure

  Command or Action Purpose
Step 1

Server # scope chassis

Enters chassis command mode.

Step 2

Server /chassis # scope server {1 | 2 }

Enters server command mode of server 1 or 2.

Step 3

Server /chassis /server # show detail

Displays server properties.

Example

This example displays server properties: 

Server# scope chassis 
Server /chassis #scope server 1 
Server /chassis /Server #show 
Server ID Power Serial Number Product Name  PID              UUID                                 
--------- ----- ------------- ------------- ---------------- ------------------------------------ 
2         on    FCH183978RD   UCS S3260     UCSC-C3X60-SVRNB 207BD0D4-C589-40C1-A73E-EF6E7F773198 

Server /chassis /Server #show detail
Server ID 1:
    Power: off
    Serial Number: FCH1848794D
    Product Name: UCS S3260
    PID: UCSC-C3X60-SVRNB
    UUID: 60974271-A514-484C-BAE3-A5EE4FD16E06
 Server /chassis /Server #

Viewing CMC Properties

Procedure

  Command or Action Purpose
Step 1

server # scope chassis

Enters chassis command mode.

Step 2

server /chassis # scope cmc 1|2

Enters CMC on the chosen SIOC controller command mode.

Step 3

server /chassis/cmc # show detail

Displays the CMC details for the chosen SIOC controller.

This example shows how to view the CMC details: 

server # scope chassis
server /chassis # scope cmc 1
server /chassis/cmc # show detail
CMC Firmware update initialized.
Please check the status using "show detail"
Server /chassis/cmc # show detail
Firmware Image Information:
    ID: 1
    Name: CMC1
    Serial Number: FCH19117MTU
    Update Stage: NONE
    Update Progress: 100
    Current FW Version: 2.0(10.97)
    FW Image 1 Version: 2.0(10.97)
    FW Image 1 State: RUNNING ACTIVATED
    FW Image 2 Version: 2.0(10.87)
    FW Image 2 State: BACKUP INACTIVATED
    Reset Reason: not-applicable (This provides the reason for the last Cisco IMC reboot.)
server /chassis/cmc #

Viewing Server CPU Details

Procedure

  Command or Action Purpose
Step 1

Server # scope chassis

Enters chassis command mode.

Step 2

Server /chassis # scope server {1 | 2 }

Enters server command mode of server 1 or 2.

Step 3

Server /chassis /server # show cpu

Displays CPU details for the server.

Step 4

Server# show cpu-pid

Displays the CPU product IDs .

Example

This example displays the CPU details for the server: 

Server# scope chassis 
Server /chassis #scope server 1 
Server /chassis /Server #show cpu
Name         Cores    Version                                            
------------ -------- -------------------------------------------------- 
CPU1         6        Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz          
CPU2         6        Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz  

Server /chassis /Server #show cpu-pid
Socket Product ID           Model                                    
------ -------------------- ---------------------------------------- 
CPU1   UCS-CPU-E52620B      Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.1... 
CPU2   UCS-CPU-E52620B      Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.1... 

 Server /chassis /Server #

Viewing Memory Properties

Procedure

  Command or Action Purpose
Step 1

Server # scope chassis

Enters chassis command mode.

Step 2

Server /chassis # scope server {1 | 2 }

Enters server command mode of server 1 or 2.

Step 3

Server /chassis /server # show dimm

Displays DIMM details for the server.

Step 4

Server# show dimm-pid

Displays the DIMM product IDs.
Step 5

Server# show dimm-summary

Displays the DIMM summary information .

Example

This example displays the DIMM details for the server.: 

Server# scope chassis 
Server /chassis #scope server 1 
Server /chassis /Server #show dimm
Name                 Capacity        Channel Speed (MHz) Channel Type    
-------------------- --------------- ------------------- --------------- 
DIMM_A1              16384 MB        1866                DDR3            
DIMM_A2              16384 MB        1866                DDR3            
DIMM_B1              16384 MB        1866                DDR3            
DIMM_B2              16384 MB        1866                DDR3            
DIMM_C1              16384 MB        1866                DDR3            
DIMM_C2              16384 MB        1866                DDR3            
DIMM_D1              16384 MB        1866                DDR3            
DIMM_D2              16384 MB        1866                DDR3            
DIMM_E1              16384 MB        1866                DDR3            
DIMM_E2              16384 MB        1866                DDR3            
DIMM_F1              16384 MB        1866                DDR3            
DIMM_F2              16384 MB        1866                DDR3            
DIMM_G1              16384 MB        1866                DDR3            
DIMM_G2              16384 MB        1866                DDR3            
DIMM_H1              16384 MB        1866                DDR3            
DIMM_H2              16384 MB        1866                DDR3  

Server /chassis /Server #show dimm-pid
Name              Product ID           Vendor ID  Capacity  Speed  
----------------- -------------------- ---------- --------- ------ 
DIMM_A1           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_A2           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_B1           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_B2           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_C1           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_C2           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_D1           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_D2           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_E1           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_E2           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_F1           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_F2           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_G1           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_G2           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_H1           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   
DIMM_H2           UCS-MR-1X162RZ-A     0xCE00     16384 MB  1866   

Server /chassis /Server #show dimm-summary
DIMM Summary:
    Memory Speed: 1600 MHz
    Total Memory: 262144 MB
    Effective Memory: 262144 MB
    Redundant Memory: 0 MB
    Failed Memory: 0 MB
    Ignored Memory: 0 MB
    Number of Ignored Dimms: 0
    Number of Failed Dimms: 0
    Memory RAS possible: Independent Mirroring Lockstep
    Memory Configuration: Independent


 Server /chassis /Server #

Viewing PCI Adapter Properties for a Server

Procedure

  Command or Action Purpose
Step 1

Server # scope chassis

Enters chassis command mode.

Step 2

Server /chassis # scope server {1 | 2 }

Enters server command mode of server 1 or 2.

Step 3

Server /chassis /server # show pci-adapter

Displays PCI adapter details for the server.

Step 4

Server# show pciadapter-pid

Displays the PCI adapter product IDs.

Example

This example displays the PCI adapter details for the server.: 

Server# scope chassis 
Server /chassis #scope server 1 
Server /chassis /Server #show pci-adapter

 
Slot       Vendor ID  Device ID  SubVendor ID  SubDevice ID  Firmware Version Product Name         
---------- ---------- ---------- ------------- ------------- ------------- ------------------------- 
L          0x8086     0x1521     0x1137        0x00d5        0x80000E74... Intel(R) I350 1 Gbps N... 
1          0x1cc7     0x0200     0x1cc7        0x0200        N/A           Radian RMS-200 NVRAM card 
MLOM       0x1137     0x0042     0x1137        0x0139        4.1(3S1)      Cisco UCS VIC 1227T MLOM  
HBA        0x1000     0x005d     0x1137        0x00db        24.12.1-0107  Cisco 12G SAS Modular ... 

Option ROM Status
----------
Loaded
Not-Loaded
Not-Loaded
Loaded

Server /chassis /Server #show pciadapter-pid
Slot   Product ID           Vendor ID  Device ID   SubVendor ID  SubDevice ID  
------ -------------------- ---------- ----------- ------------- ------------- 
1      UNKNOWN              0x1137     0x0042      0x1137        0x0157        
M      UCSC-C3X60-RAID      0x1000     0x005d      0x1137        0x012d    
 
 Server /chassis /Server #

Viewing HDD Details for a Server

Procedure

  Command or Action Purpose
Step 1

Server # scope chassis

Enters chassis command mode.

Step 2

Server /chassis # scope server {1 | 2 }

Enters server command mode of server 1 or 2.

Step 3

Server /chassis /server # show hdd-pid

Displays HDD details for the server.

Example

This example displays the HDD details for the server: 

Server# scope chassis 
Server /chassis #scope server 1 
Server /chassis /Server #show hdd-pid
Disk Controller  Product ID           Vendor     Model        
---- ----------- -------------------- ---------- ------------ 
1    SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
2    SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
3    SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
4    SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
5    SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
6    SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
7    SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
8    SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
9    SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
10   SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
11   SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
12   SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
13   SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400   
14   SLOT-MEZZ   UCS-HD4T7KS3-E       TOSHIBA    MG03SCA400  

 Server /chassis /Server#

Viewing Storage Adapter Properties for a Server

Procedure

  Command or Action Purpose
Step 1

Server # scope chassis

Enters chassis command mode.

Step 2

Server /chassis # scope server {1 | 2 }

Enters server command mode of server 1 or 2.

Step 3

Server /chassis /server # show storageadapter

Displays storage adapter details for the server.

Example

This example displays the storage adapter details for the server.: 

Server# scope chassis 
Server /chassis #scope server 1 
Server /chassis /Server #show storageadapter
PCI Slot     Health         Controller Status ROC Temperature Product Name                            
------------ -------------- ----------------- --------------- ----------------------------------    
SLOT-MEZZ    Good           Optimal           48 degrees C    RAID controller for UCS S3260 S...   
          
Serial Number   Firmware Package Build  Product ID  D Battery Status  Cache Memory Size
--------------  ----------------------  ----------  ----------------  ----------------- 
FCH184972F5      24.7.3-0006            LSI Logic   Optimal            3534 MB

Boot Drive  Boot Drive is PD 
----------  -----------------
 0           false
 Server /chassis /Server #

Viewing TPM Properties

Procedure

  Command or Action Purpose
Step 1

Server # scope chassis

Enters chassis command mode.

Step 2

Server /chassis # scope server {1 | 2 }

Enters server command mode of server 1 or 2.

Step 3

Server /chassis/server # show tpm-inventory

Displays TPM properties for the server.

Example

This example displays the TPM properties for the server: 

Server# scope chassis 
Server /chassis #scope server 1 
Server /chassis /Server #show tpm-inventory
Version     Presence     Enabled-Status     Active-Status     Ownership Revision             
----------- ------------ ------------------ ----------------- --------- ------------  
NA          empty        unknown            unknown           unknown   NA   

Model            Vendor               Serial   
---------------- -------------------- ----------------

 Server chassis /Server#

Was this Document Helpful?

FeedbackFeedback

Contact Cisco