The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
A - C - D - E - F - G - I - P - R - S - T - U - V - Y -Index
A
activate (firmware) 1
activate (VIC) command 1
activate-adapter-fw 1
adapter-reset-defaults 1
C
cancel 1
CIMC CLI 1
clear (log) 1
clear (sel) 1
clear-cmos 1
commit 1
connect 1
create host-eth-if 1
create-boot-entry 1
D
delete boot 1
delete host-eth-if 1
discard 1
E
EFI
adapter configuration 1 2
exit 1
export-config command 1
export-vnic 1
export-vnic (VIC) command 1
F
factory-default (cimc) 1
G
generate-csr (certificate) 1
I
import-config 1
import-vnic 1
import-vnic (VIC) command 1
P
ping (network) 1
power (chassis) 1
R
reapply 1
reboot (chassis) 1
recover (firmware) 1
recover-adapter-update command 1
reset-defaults (VIC) command 1
S
scope adapter 1
scope adapter (VIC) command 1
scope bios 1
scope certificate 1
scope chassis 1
scope cimc 1
scope comp-queue command 1
scope description (chassis) 1
scope error-recovery 1
scope fault 1
scope firmware (VIC) command 1
scope firmware command 1
scope host-eth-if 1
scope host-fc-if 1
scope http 1
scope import-export 1
scope interrupt command 1
scope ipblocking (network) 1
scope ipmi 1
scope kvm 1
scope ldap 1
scope log (cimc) 1
scope network (cimc) 1
scope offload command 1
scope pef 1
scope perbi command 1
scope port 1
scope port-f-logi command 1
scope port-p-logi 1
scope recv-queue command 1
scope rss command 1
scope scsi-io 1
scope sel 1
scope sensor 1
scope server (log) 1
scope sol 1
scope ssh 1
scope tech-support (cimc) 1
scope trans-queue command 1
scope trap-destination (fault) command 1
scope user 1
scope user-session 1
scope vmedia 1
server overview 1
set (fault) 1
set (http) 1
set (ipblocking) 1
set (ipmi) 1
set (kvm) 1
set (ldap) 1
set (network) 1
set (sol) 1
set (ssh) 1
set (user) 1
set (vmedia) 1
set action (pef) 1
set addr (trap-destination) 1
set boot command 1
set boot-order (bios) 1
set cdb-wq-count command 1
set cdb-wq-ring-size 1
set chassis 1
set cli output 1
set coalescing-time command 1
set coalescing-type command 1
set cos command 1
set cq-count command 1
set enabled (trap-destination) 1
set error-detect-timeout command 1
set fcp-error-recovery command 1
set flogi-retries command 1
set flogi-timeout command 1
set interrupt-count command 1
set interrupt-mode command 1
set link-down-timeout 1
set locator-led command 1
set mac-addr command 1
set max-target-luns command 1
set mtu command 1
set order command 1
set outstanding-io-count command 1
set path (tech-support) 1
set persistent-lun-binding command 1
set plogi-retries 1
set plogi-timeout 1
set port-down-io-retry-count command 1
set port-down-timeout 1
set resource-allocation-timeout command 1
set rq-count command 1
set rq-ring-size command 1
set rss command 1
set rss-hash-ipv4 command 1
set rss-hash-ipv6 command 1
set rss-hash-ipv6-ex command 1
set rss-hash-tcp-ipv4 command 1
set rss-hash-tcp-ipv6 command 1
set rss-hash-tcp-ipv6-ex command 1
set send-alert (pef) 1
set server-ip 1 2
set tcp-rx-checksum-offload command 1
set tftp-ip (tech-support) 1
set trust-host-cos command 1
set uplink command 1
set vlan command 1
set vlan-mode command 1
set wq-count command 1
set wq-ring-size command 1
set wwnn command 1
set wwpn command 1
show actual-boot-order (bios) 1
show adapter command 1
show bios 1
show boot command 1
show certificate 1
show chassis 1
show cimc 1
show comp-queue command 1
show configuration pending 1
show cpu (chassis) 1
show dimm (chassis) 1
show entries (log) 1
show entries (sel) 1
show error-recovery command 1
show ext-eth-if 1
show fan (sensor) 1
show fault 1
show firmware 1
show firmware (VIC) command 1
show hdd (chassis) 1
show host-eth-if 1
show host-fc-if 1
show http 1
show interrupt command 1
show ipblocking (network) 1
show ipmi 1
show kvm 1
show ldap 1
show led (chassis) 1
show network (cimc) 1
show offload command 1
show pef (fault) 1
show perbi command 1
show port command 1
show port-f-logi command 1
show port-p-logi command 1
show psu (chassis) 1
show psu (sensor) 1
show psu-redundancy (sensor) 1
show recv-queue command 1
show rss command 1
show scsi-io 1
show sol 1
show ssh 1
show tech-support (cimc) 1
show temperature (sensor) 1
show trans-queue command 1
show trap-destination (fault) 1
show user 1
show user-session 1
show version 1
show vmedia 1
show voltage (sensor) 1 2
start 1
T
techsupport (VIC) command 1
terminate (usser-session) 1
top 1
U
update (firmware) 1
update (VIC) command 1
update-adapter-fw command 1
upload (certificate) 1
V
VIC Configuration Utility
connecting 1
understanding 2
Y
YAML 1