Cisco TelePresence Multipoint Switch Release 1.5 Command Reference
Chapter: CTMS Unset Commands
CTMS Unset Commands
This chapter contains the following Cisco TelePresence Multipoint Switch (CTMS) unset CLI commands. For information on how to use CTMS CLI commands, refer to "Using Cisco TelePresence Multipoint Switch CLI Commands" chapter in this manual.
Note 
For information about using the CTMS Administration software, refer to the Cisco TelePresence Multipoint Switch Release 1.5 Administration Guide at the following URL:
http://www.cisco.com/en/US/products/ps7315/prod_maintenance_guides_list.html
unset network dns options
unset network dns options [timeout] [attempts] [rotate]
Syntax Description
Command Modes
Admin
Command History
|
|
|
|---|---|
1.5 |
This command was first documented. |
Usage Guidelines
Use this command to unset the Domain Name System (DNS) options. This command causes a temporary loss of network connections.
Examples
admin:unset network dns options timeout
*** W A R N I N G ***
This will cause the system to temporarily lose network connectivity
Do you want to continue ?
Enter "yes" to continue or any other key to abort
yes
executing...
admin:show workingdir
Feedback