This appendix lists the supported MIBs for this release on the Catalyst 3750 Metro switch. It contains these sections:
•Using FTP to Access the MIB Files
Note The BRIDGE-MIB supports the context of a single VLAN. By default, SNMP messages using the configured community string always provide information for VLAN 1. To obtain the BRIDGE-MIB information for other VLANs, for example VLAN x, use this community string in the SNMP message: configured community string @x.
Note The IEEE-compliant CFM MIB (IEEE CFM MIB) provides MIB support for IEEE 802.1ag compliant CFM (IEEE CFM) services. You can use the IEEE CFM MIB as a tool to trace paths, verify and manage connectivity, and detect faults in a network.
For information about the IEEE CFM MIB and the services it supports, see:
•CISCO-FLASH-MIB (Flash memory on all switches is modeled as removable Flash memory.)
•CISCO-HSRP-EXT-MIB (partial support)
•CISCO-PORT-QOS-MIB (the cportQosStats Table returns the values from the octets and packet counters, depending on switch configuration)
Note Cisco IOS Release 12.2(37)SE adds CLI support for the cpmCPUThresholdTable objects.
•IF-MIB (In and out counters for VLANs are not supported.)
•RFC1213-MIB (Functionality is as per the agent capabilities specified in the CISCO-RFC1213-CAPABILITY.my.)
The IEEE-compliant CFM MIB (IEEE CFM MIB) provides MIB support for IEEE 802.1ag compliant CFM (IEEE CFM) services. The IEEE CFM MIB can be used as a tool to trace paths, verify and manage connectivity, and detect faults in a network.
For information about the IEEE CFM MIB and the services it supports, see this URL:
Note For information about MIB support for a specific Cisco product and release, go to the MIB Locator tool at this URL:
Using FTP to Access the MIB Files
You can get each MIB file by using this procedure:
Step 1 Make sure that your FTP client is in passive mode.
Note Some FTP clients do not support passive mode.
Step 2 Use FTP to access the server ftp.cisco.com.
Step 3 Log in with the username anonymous.
Step 4 Enter your e-mail username when prompted for the password.
Step 5 At the
ftp> prompt, change directories to /pub/mibs/v1 and /pub/mibs/v2.
Step 6 Use the get MIB_filename command to obtain a copy of the MIB file.