The SSM Channel Based Filtering for Multicast Boundaries feature expands the
ipmulticastboundary command for control plane filtering support. More than one
ipmulticastboundary command can be applied to an interface.
The following rules govern the
One instance of the
out keywords can be configured on an interface.
out keywords can be used for standard or extended access lists.
Only standard access lists are permitted with the use of the
filter-autorp keyword or no keyword.
A maximum of three instances of a command will be allowed on an interface: one instance of
in, one instance of
out, and one instance of
filter-autorp or no keyword.
When multiple instances of the command are used, the filtering will be cumulative. If a boundary statement with no keyword exists with a boundary statement with the
inkeyword, both access lists will be applied on the in direction and a match on either one will be sufficient.
All instances of the command apply to both control and data plane traffic.
Protocol information on the extended access list is parsed to allow reuse and filtering for consistency. An (S,G) operation will be filtered by an extended access list under all conditions stated above for keywords if the access list filters (S,G) traffic for all protocols.
Benefits of SSM Channel Based Filtering for Multicast Boundaries
This feature allows input on the source interface.
The access control capabilities are the same for SSM and Any Source Multicast (ASM).
How to Configure SSM Channel Based Filtering for Multicast Boundaries
The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies.
To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds.
Access to most tools on the Cisco Support website requires a Cisco.com user ID and password.
Feature Information for IP Multicast Optimization: SSM Channel Based Filtering for Multicast
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 1 Feature Information for IP Multicast Optimization: SSM Channel Based Filtering for Multicast
IP Multicast Optimization: SSM Channel Based Filtering for Multicast
Cisco IOS XE Everest 16.5.1a
The SSM Channel Based Filtering for Multicast Boundaries feature expands the ip multicast boundary command for control plane filtering support. More than one ip multicast boundary command can be applied to an interface.
This feature was implemented on the following platforms: