The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
All the switches in the stack must be running the same license level as the active switch. For information about license levels, see the System Management Configuration Guide.
All the switches in the stack must be running compatible software versions.
1:1 redundancy is used to assign active and standby roles to specific switches in the stack. This overrides the traditional N+1 role selection algorithm, where any switch in the stack can be active or standby. In 1:1 redundancy, the stack manager determines the active and standby role for a specific switch, based on the flash ROMMON variable. The algorithm assigns one switch as active, another switch as standby, designating all remaining switches in the stack as members. When an active switch reboots it becomes standby and the existing standby switch will become active. The existing member switches remain in the same state.
Follow these steps to enable the 1:1 redundancy stack mode, and set a switch as the active switch in a stack, or as the standby:
| Command or Action | Purpose | |
|---|---|---|
| Step 1 |
enable Example: |
Enables privileged EXEC mode.
|
| Step 2 |
switch switch-number role { active | standby} Example: |
Changes stack mode to 1:1 mode and designates the switch as active or standby.
|
On a switch where 1:1 redundancy is enabled, follow these steps to disable the feature. This changes the stack mode to N+1:
| Command or Action | Purpose | |
|---|---|---|
| Step 1 |
enable Example: |
Enables privileged EXEC mode.
|
| Step 2 |
switch clear stack-mode Example: |
Changes stack mode to the N+1 mode and removes active and standby assignments. |
You can use the switch switch-number role command to set the active and standby switch in 1:1 stack mode. Stack will run in 1:1 stack mode with designated active or standby after reboot. In the following example, switch 1 is assigned the active role, and switch 2 is assigned the standby role.
Device# switch 1 role active
WARNING: Changing the switch role may result in redundancy mode being configured to 1+1 mode for this stack. If the configured Active or Standby switch numbers do not boot up, then the stack will not be able to boot. Do you want to continue?[y/n]? [yes]: yesDevice# switch 2 role standby
WARNING: Changing the switch role may result in redundancy mode being configured to 1+1 mode for this stack. If the configured Active or Standby switch numbers do not boot up, then the stack will not be able to boot. Do you want to continue?[y/n]? [yes]: yesYou can use the switch clear stack-mode command to remove 1:1 stack mode, and change it back to N+1 stack mode.
Device#switch clear stack-mode
WARNING: Clearing the chassis HA configuration will resultin the chassis coming up in Stand Alone mode after reboot.The HA configuration will remain the same on other chassis. Do you wish to continue? [y/n]? [yes]:To verify the current stack mode on a switch, enter the show switch stack-mode command in priviledged EXEC mode. The output displays detailed status of the currently running stack mode.
Device# show switch stack-mode
Switch Role Mac Address Version Mode Configured State
---------------------------------------------------------------
1 Member 3c5e.c357.c880 1+1' Active' Ready
*2 Active 547c.69de.cd00 V05 1+1' Standby' Ready
3 Member 547c.6965.cf80 V05 1+1' Member' ReadyThe Mode field indicates the current stack mode
The Configured field refers to the switch state expected after a reboot.
Single quotation marks ( ' ) indicate that the stack mode has been changed.
| Related Topic | Document Title |
|---|---|
|
For complete syntax and usage information for the commands used in this chapter. |
See the Stack Manager and High Availability section of the guide for the release |
| MIB | MIBs Link |
|---|---|
|
All the supported MIBs for this release. |
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: |
| Description | Link |
|---|---|
|
The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. |
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
|
Release |
Modification |
|---|---|
|
Cisco IOS XE Fuji 16.9.1 |
This feature was introduced. |
Feedback