Repacking the Switch

To return or move the switch chassis, follow these steps and repack the switch using the original packaging material:

Procedure
    Step 1   Place the chassis in the packing bag (not shown here).
    Step 2   Place foam caps over the chassis.
    Step 3   Slide the components arranged in step 2 into the carton.
    Step 4   Place the accessory kit and cables in the compartments provided in the padding material (Callout 5).
    Note   

    You must include the accessory kit for the final package to fit properly.

    Step 5   Place the padding material (shown in callout 5) over the top of the chassis.
    Step 6   Place the carton over the pallet.
    Step 7   Fold the carton flaps down over the top and seal with packing tape. Use an appropriate amount of 3M 373 3-inch-wide pressure-sensitive carton-sealing tape (the Cisco logo is displayed on the tape).
    Step 8   Place the Cisco-approved poly-banding and edge protectors.
    Step 9   Strech-wrap the unit to hold the carton and the bottom pallet together.
    Figure 1. Repacking the Switch

    1

    Bottom pallet

    2

    Carton

    3

    Foam cap

    4

    Foam cap

    5

    Padding material that also contains the accessory kit, cables, and documentation.)

    6

    Edge protectors

    The package is now secure and ready for shipment.
    Figure 2. Final Assembled Package