The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
C - D - F - I - L - M - O - R - S - T - V - W - X -Index
C
cisco plug-in for openflow
configuring 1
Cisco Plug-In for OpenFlow
about 1
about, controller operation 1
about, OpenFlow operation 1
configuring, for an OpenFlow logical switch 1
examples 1
feature support 1
match, actions, and pipelines 1
prerequisites 1
restrictions 1
specifying a route to a controller 1
verifying configuration 1
workflow 1
cisco plug-in for OpenFlow and virtual service container 1
configured logical switch 1
configuring physical interfaces as logical switch ports 1
configuring virtual services container
example 1
connection to controllers 1D
default forwarding rule 1F
flows 1I
idle timeout 1L
L2 MAC forwarding table 1
L3 forwarding table 1M
multiple actions for a flow 1O
OneP
configuring 1
OpenFlow 1.0 1
OpenFlow 1.3 1 2
OpenFlow counters 1
OpenFlow hybrid 1
OpenFlow message types 1
OpenFlow-enabled interfaces 1
OVA 1R
recommended disk space 1
reference information 1 2S
specifying a route to a controller
using a management interface 1
using a physical interface 1T
TCAM entries 1
troubleshooting 1
application activation 1
application deactivation 1
application installation 1
collecting information for 1
uninstalling 1V
virtual services container
configuring 1
Virtual Services Container
and an application 1
installing and activating an application 1
prerequisites 1W
wire protocol 1X
XNC 1