Preface

Preface

This guide describes the hardware features of the Cisco Catalyst 3650 Series switches. It describes the physical and performance characteristics of each switch, explains how to install a switch, and provides troubleshooting information.

note.gif

Noteblank.gif This guide does not describe system messages that you might receive or how to configure your switch. For information about these topics, see the switch’s software configuration guide, the command reference document, and the system message guide at: http://www.cisco.com/go/cat3650_docs

This chapter includes the following topics:

Document Conventions

This document uses the following conventions.

note.gif

Noteblank.gif Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.

caut.gif
Caution blank.gif Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

 

warn.gif

Warningblank.gif

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

 

The safety warnings for this product are translated into several languages in the Regulatory Compliance and Safety Information for the Catalyst 3650 Switch that is available on Cisco.com. The EMC regulatory statements are also included in that guide.

Related Documentation

note.gif

Noteblank.gif Before installing or upgrading the switch, refer to the switch’s release notes.

  • Catalyst 3650 Series documentation at:

http://www.cisco.com/go/cat3650_docs

  • Cisco SFP and SFP+ modules documentation, including compatibility matrices, at:

http://www.cisco.com/en/US/products/hw/modules/ps5455/tsd_products_support_series_home.html

  • Cisco Validated Designs documents at:

http://www.cisco.com/go/designzone

  • Error Message Decoder, located at:

https://www.cisco.com/cgi-bin/Support/Errordecoder/index.cgi

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.