The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
1 - 8 - < - A - B - C - D - E - F - G - H - I - K - L - M - N - O - P - Q - R - S - T - U - V - W -Index
1
128-bit 18
802.1x 1<
<$nopage>HTTP over SSL
see HTTPS 1
<$nopage>IEEE 802.3ad
See EtherChannel 1
<$nopage>PAgP
See EtherChannel 1
<$nopage>Port Aggregation Protocol
See EtherChannel 1
<$nopage>Secure Copy Protocol 1A
access control entries
See ACEs 1
access groups, applying IPv4 ACLs to interfaces 1
access lists
See ACLs 1
accounting 1 2
with RADIUS 1
with TACACS+ 1 2
accounting, defined 1
ACEs
Ethernet 1
IP 1
ACL
ACL
IPv4 1
IP extended 1
IP standard 1
IPv4 1
IPv6 1
Layer 2 MAC 1
ACLs 1
applying
time ranges to 1
to an interface 1
to QoS 1
classifying traffic for QoS 1
compiling 1
defined 1
examples of 1 2
extended IPv4
creating 1
matching criteria 1
guidelines 1
interface 1
IP
fragments and QoS guidelines 1
implicit deny 1
implicit masks 1
matching criteria 1
undefined 1
IPv4
applying to interfaces 1
creating 1
interfaces 1
matching criteria 1
numbers 1
terminal lines, setting on 1
unsupported features 1
matching 1
monitoring 1
number per QoS class map 1
port 1
precedence of 1
QoS 1 2
resequencing entries 1
router 1
standard IPv4
creating 1
matching criteria 1
support in hardware 1
time ranges to 1
types supported 1
unsupported features
IPv4 1
active link 1 2
active links 1
adding 1 2
address formats 1
address resolution 1
addresses 1
dynamic
accelerated aging 1
default aging 1
defined 1
learning 1
IPv6 1
MAC, discovering 1
multicast
STP address management 1
static
adding and removing 1
aggregatable global unicast addresses 1
aggregate policers 1 2 3
aggregate-port learners 1
aging time
accelerated
for MSTP 1
for STP 1
MAC address table 1
alternate
port 1
and ARP 1
and CDP 1
and IPv6 1
and SSH 1
applications 1
ARP
defined 1
table
address resolution 1
assigning address 1
assigning information
member number 1
priority value 1
assigning IPv6 addresses to 1
attributes
vendor-proprietary 1
vendor-specific 1
attributes, RADIUS
vendor-proprietary 1 2
vendor-specific 1
authentication 1
local mode with AAA 1
RADIUS
key 1
login 1
TACACS+
defined 1
key 1
login 1
authentication key 1
authentication, defined 1
authoritative time source, described 1
authorization 1 2
with RADIUS 1
with TACACS+ 1 2
authorization, defined 1
auto-QoS 1
Auto-Qos
monitoring 1
Auto-QoS
Generated Configuration For Enhanced Video, Trust, and Classify Devices 1
Global Configuration 1
autoconfiguration 1
automatic 1
automatic creation of 1 2
automatic QoS
See QoS 1
autonegotiation
mismatches 1B
backup
port 1
backup interfaces
See Flex Links 1
banners
configuring
login 1
message-of-the-day login 1
default configuration 1
basic crashinfo
description 1
location 1
Berkeley r-tools replacement 1
binding configuration
automatic 1
manual 1
binding database
address, DHCP server
See DHCP, Cisco IOS server database 1
binding physical and logical interfaces 1
binding table 1
bindings
address, Cisco IOS DHCP server 1
IP source guard 1
blocking
state 1
BPDU 1
contents 1
RSTP format 1
bridge identifier (bridge ID) 1
bridge protocol data units 1
broadcast traffic 1
buffer allocation 1 2C
CA trustpoint
configuring 1
defined 1
CDP
and trusted boundary 1
defined with LLDP 1
changing the default for lines 1
channel groups
binding physical and logical interfaces 1
numbering of 1
CipherSuites 1
Cisco 7960 IP Phone 1
Cisco Discovery Protocol (CDP) 1
Cisco IOS DHCP server
See DHCP, Cisco IOS DHCP server 1
Cisco IOS IP SLAs 1
Cisco IP Phone Data Traffic 1
Cisco IP Phone Voice Traffic 1
Cisco Networking Services 1
CIST regional root
See MSTP 1 2
CIST root
See MSTP 1
civic location 1
class maps for QoS
configuring 1 2
classification overview 1
clock
See system clock 1
CNS 1
CoA Request Commands 1
commands, setting privilege levels 1
communication, global 1 2
communication, per-server 1
Configuration Engine
restrictions 1
Configuration Examples command 1
Configuration Examples for Configuring EtherChannels command 1
Configuration Examples for Configuring MLD Snooping Queries command 1
Configuration Examples for Configuring SDM Templates command 1
configuration files 1
invalid combinations when copying 1
password recovery disable considerations 1
configuration guidelines 1 2
configuring 1 2 3 4 5 6 7
accounting 1 2
authentication 1
authentication key 1
authorization 1 2
communication, global 1 2
communication, per-server 1
Layer 2 interfaces 1
login authentication 1
member number 1
multiple UDP ports 1
on Layer 2 interfaces 1
priority value 1
Configuring a Multicast Router Port: Example command 1
configuring a secure HTTP client 1
configuring a secure HTTP server 1
Configuring a Static Multicast Group: Example command 1
Configuring IPv6 Addressing and Enabling IPv6 Routing: Example command 1
Configuring IPv6 ICMP Rate Limiting: Example command 1
Configuring LACP Hot-Standby Ports: Example 1
Configuring Layer 3 EtherChannels: Examples command 1
Configuring Layer 2 EtherChannels: Examples command 1
Configuring Link-State Tracking: Example 1
Configuring MLD Snooping Queries: Example command 1
configuring ports for voice traffic in
802.1p priority tagged frames 1
Configuring SDM templates: Examples: command 1
Configuring Static Routing for IPv6: Example command 1
Configuring the Switch for Vendor-Proprietary RADIUS Server Communication: Example command 1
Configuring the Switch to Use Vendor-Specific RADIUS Attributes: Examples command 1
confirming 1
CoS
in Layer 2 frames 1
override priority 1
CoS output queue threshold map for QoS 1
CoS-to-DSCP map for QoS 1 2
cross-stack EtherChannel 1 2
configuring
on Layer 2 interfaces 1
described 1
illustration 1
cryptographic software image
switch stack considerations 1
customizeable web pages, web-based authentication 1D
daylight saving time 1
debugging
enabling all system diagnostics 1
redirecting error message output 1
using commands 1
default configuration 1 2 3 4 5 6 7 8
auto-QoS 1
banners 1
DNS 1
EtherChannel 1
Flex Links 1
IGMP snooping 1 2
IPv6 1
LLDP 1
MAC address table 1
MAC address-table move update 1
MSTP 1
password and privilege level 1
RADIUS 1
RSPAN 1
SPAN 1
SSL 1
STP 1
TACACS+ 1
UDLD 1
default Ethernet VLAN configuration 1
default web-based authentication configuration
802.1X 1
defined 1 2 3 4
Event Service 1
NameSpace Mapper 1
defining AAA server groups 1
definition
VLAN 1
deletion
VLAN 1
described 1 2 3 4 5 6 7
description 1 2
designated
port 1
switch 1
destination-IP address-based forwarding 1
destination-IP address-based forwarding, EtherChannel 1
destination-MAC address forwarding 1
destination-MAC address forwarding, EtherChannel 1
device
root 1
device priority
MSTP 1
STP 1
devices supported 1
DHCP
enabling
relay agent 1
server 1
DHCP option 82
displaying 1
overview 1
DHCP server port-based address allocation
default configuration 1
enabling 1 2 3
reserved addresses 1
DHCP snooping 1
accepting untrusted packets form edge switch 1
option 82 data insertion 1
trusted interface 1
untrusted messages 1
DHCP snooping binding database
adding bindings 1
binding file
format 1
location 1
configuration guidelines 1
configuring 1
described 1
enabling 1
Differentiated Services (Diff-Serv) architecture 1
Differentiated Services Code Point 1
directories
changing 1
creating 1
displaying the working 1
removing 1
disabled
state 1
disabling 1
disabling recovery of 1
displaying 1
Displaying IPv6: Example command 1
Displaying SDM Templates: Examples: command 1
DNS
default configuration 1
in IPv6 1
overview 1
setting up 1
Domain Name System
See DNS 1
domain names 1
DNS 1
DSCP 1
DSCP maps 1
DSCP-to-CoS map for QoS 1
DSCP-to-DSCP-mutation map for QoS 1
dual IPv4 and IPv6 templates 1
dual protocol stacks
IPv4 and IPv6 1
SDM templates supporting 1
dual-action detection 1
dynamic access ports
configuring 1
dynamic addresses
See addresses 1
dynamic port membership
described 1
reconfirming 1
troubleshooting 1
dynamic port VLAN membership
described 1
reconfirming 1 2
troubleshooting 1
types of connections 1
dynamic VLAN assignments 1E
egress expedite queue 1
egress queue 1 2 3
egress queues 1 2
ELIN location 1
enable 1
enable password 1
enable secret 1
enable secret password 1
enabling 1 2 3
enabling all system diagnostics 1
enabling and disabling 1
Enabling MLD Immediate Leave: Example command 1
encrypting 1
encryption for passwords 1
encryption methods 1
encryption, CipherSuite 1
entering server address 1
EtherChannel 1 2
automatic creation of 1 2
channel groups
binding physical and logical interfaces 1
numbering of 1
configuration guidelines 1
configuring
Layer 2 interfaces 1
default configuration 1
extended load balancing 1
forwarding methods 1 2
IEEE 802.3ad, described 1
interaction
with STP 1
LACP
hot-standby ports 1
interaction with other features 1
modes 1
port priority 1
system priority 1
load balancing 1 2
logical interfaces, described 1
PAgP
about aggregate-port learners 1
about learn method and priority 1
aggregate-port learners 1
described 1
interaction with other features 1
interaction with virtual switches 1
learn method and priority configuration 1
modes 1
with dual-action detection 1
port-channel interfaces
numbering of 1
EtherChannel failover 1
EtherChannel | interaction
with VLANs 1
EtherChannels 1 2 3
Ethernet VLAN 1
EUI 1
Event Service 1
example
ACLs 1
class maps 1
classifying, policing, marking traffic on physical ports 1
configuring egress queue 1
configuring port to DSCP-trusted state 1
modifying DSCP-DSCP mutation map 1
Example for Performing a Traceroute to an IP Host command 1
Example for Pinging an IP Host command 1
Examples for Configuring the System MTU command 1
Examples for controlling switch access with RADIUS 1
executing 1 2
exiting 1
expedite queue
egress queues
SRR weights 1
guidelines 1
expedite queue for QoS 1
extended crashinfo
description 1
location 1
extended load balancing 1
extended system ID
MSTP 1
STP 1 2
extended universal identifier
See EUI 1
extended-range VLAN 1
extended-range VLAN configuration guidelines 1F
fallback bridging
STP
keepalive messages 1
fiber-optic, detecting unidirectional links 1
file system
displaying available file systems 1
displaying file information 1
local file system names 1
network file system names 1
setting the default 1
files
basic crashinfo
description 1
location 1
copying 1
deleting 1
extended crashinfo
description 1
location 1
tar
creating 1
displaying the contents of 1
extracting 1
filtering
non-IP traffic 1
source IP address 1
source IP and MAC address 1
filters, IP
See ACLs, IP [filters
IP 1
flash device,
number of 1
flash: file system 1
Flex Links
configuring 1 2
configuring VLAN load balancing 1
default configuration 1
description 1
link load balancing 1
monitoring 1
preemption scheme 1
preferred VLAN example 1
switchport backup example
forced preemption mode example 1
VLAN load balancing examples 1
Flex Links failover 1
forward-delay time
MSTP 1
STP 1
forwarding 1
state 1
forwarding methods 1 2G
general query 1
Generating IGMP Reports 1H
hello time
MSTP 1
STP 1
hosts, limit on dynamic ports 1
hot-standby ports 1
HTTP secure server 1
HTTP(S) Over IPv6 1
HTTPS
configuring 1
described 1
self-signed certificate 1I
ICMP 1
IPv6 1
time-exceeded messages 1
traceroute and 1
unreachable messages 1
ICMP ping
executing 1
overview 1
ICMPv6 1
Identifying the RADIUS Server Host: Examples command 1
identifying the server 1 2
IEEE 802.1Q tagging 1
IEEE 802.1s
See MSTP 1
IEEE 802.3ad, described 1
IGMP
leave processing, enabling 1
report suppression
disabling 1
snooping 1
IGMP snooping 1 2
default configuration 1 2
enabling and disabling 1
monitoring 1
Immediate Leave, IGMP
enabling 1
in IPv6 1
ingress queue
default configuration 1
Inter-Switch Link
See ISL 1
inter-VLAN routing 1
interaction with other features 1 2
interaction with virtual switches 1
Internet Protocol version 6
See IPv6 1
Intrusion Detection System
See IDS appliances 1
inventory management TLV 1
IP ACLs
for QoS classification 1
named 1
IP addresses
128-bit 1
classes of 1
discovering 1
IPv6 1
IP addresses and subnets 1
IP phones
automatic classification and queueing 1
ensuring port security with QoS 1
trusted boundary for QoS 1
IP precedence 1
IP routing
enabling 1
IP SLA
responder
described 1
enabling 1
IP SLAs
benefits 1
configuration 1
measuring network performance 1
response time 1
SNMP support 1
supported metrics 1
IP source guard 1 2
802.1x 1
binding configuration
automatic 1
manual 1
binding table 1
configuration guidelines 1
described 1
DHCP snooping 1
enabling 1 2
EtherChannels 1
filtering
source IP address 1
source IP and MAC address 1
port security 1
routed ports 1
source IP address filtering 1
source IP and MAC address filtering 1
static bindings
adding 1 2
static hosts 1
TCAM entries 1
trunk interfaces 1
VRF 1
IP traceroute
executing 1
overview 1
IP unicast routing
enabling 1
inter-VLAN 1
IP addressing
classes 1
IPv6 1
subnet mask 1
IP-precedence-to-DSCP map for QoS 1 2
IPv4 ACLs
applying to interfaces 1
extended, creating 1
interfaces 1
named 1
standard, creating 1
IPv4 and IPv6 1
IPv6 1 2 3 4 5
ACL 1
address formats 1
addresses 1
applications 1
assigning address 1
autoconfiguration 1
default configuration 1
defined 1
forwarding 1
ICMP 1
monitoring 1
neighbor discovery 1
SDM templates 1
Stateless Autoconfiguration 1
supported features 1
ISL
and IPv6 1K
keepalive messages 1
key 1 2L
LACP 1 2
hot-standby ports 1
interaction with other features 1
modes 1
port priority 1
system priority 1
Layer 2 EtherChannel configuration guidelines 1
Layer 2 interface modes 1
Layer 2 interfaces 1
Layer 2 traceroute
and ARP 1
and CDP 1
broadcast traffic 1
described 1
IP addresses and subnets 1
MAC addresses and VLANs 1
multicast traffic 1
multiple devices on a port 1
unicast traffic 1
usage guidelines 1
Layer 3 interfaces
assigning IPv6 addresses to 1
Layer 3 packets, classification methods 1
Leaking IGMP Reports 1
learn method and priority configuration 1
leave processing, enabling 1
limiting the services to the user 1 2
Link Failure, detecting unidirectional 1
link local unicast addresses 1
link redundancy
See Flex Links 1
link-state tracking
description 1
listening
state 1
LLDP
configuring
default configuration 1
enabling 1
overview 1
switch stack considerations 1
transmission timer and holdtime, setting 1
LLDP-MED
configuring
TLVs 1
overview 1
supported TLVs 1
load balancing 1 2
load balancing advantages 1
load sharing 1 2
trunk ports 1
local mode with AAA 1
local SPAN 1
location 1 2
location TLV 1
logging into 1
logical interfaces, described 1
login 1 2
login authentication 1
with RADIUS 1
with TACACS+ 1
login banners 1M
MAC address of 1
MAC address-table move update
configuration guidelines 1
configuring 1
default configuration 1
description 1
obtain and process messages 1
MAC addresses
aging time 1
and VLAN association 1
building the address table 1
default configuration 1
discovering 1
dynamic
learning 1
static
characteristics of 1
MAC addresses and VLANs 1
MAC extended access lists
applying to Layer 2 interfaces 1 2
MAC/PHY configuration status TLV 1
management address TLV 1
managing switch stacks 1
manual 1
mapping table
default configuration 1
mapping tables for QoS
configuring
CoS-to-DSCP 1 2
DSCP 1
DSCP-to-CoS 1
DSCP-to-DSCP-mutation 1
IP-precedence-to-DSCP 1 2
policed-DSCP 1
described 1
marking
action in policy map 1
action with aggregate policers 1 2 3
maximum aging time
MSTP 1
STP 1
maximum hop count, MSTP 1
member number 1
membership mode 1
memory allocation 1
messages, to users through banners 1
mirroring traffic for analysis 1
mismatches 1
mismatches, autonegotiation 1
MLD Messages 1
MLD Queries 1
MLD Reports 1
MLD Snooping 1
MLDv1 Done message 1
modes 1 2
monitoring 1 2 3 4
access groups 1
Flex Links 1
IGMP
snooping 1
IPv4 ACL configuration 1
IPv6 1
network traffic for analysis with probe 1
SFP status 1
VLAN
filters 1
maps 1
voice VLAN 1
VTP 1
monitoring status of 1
mrouter Port 1
MSTP
boundary ports
configuration guidelines 1
described 1
CIST regional root 1 2
CIST root 1
CIST, described 1
configuration guidelines 1
configuring
device priority 1
forward-delay time 1
hello time 1
link type for rapid convergence 1
maximum aging time 1
maximum hop count 1
MST region 1
neighbor type 1
path cost 1
port priority 1
root device 1
secondary root device 1
CST
operations between regions 1
default configuration 1
displaying status 1
enabling the mode 1
extended system ID
effects on root device 1
effects on secondary root device 1
unexpected behavior 1
IEEE 802.1s
implementation 1
port role naming change 1
terminology 1
instances supported 1
interoperability and compatibility among modes 1 2
interoperability with IEEE 802.1D
described 1
restarting migration process 1
IST
operations within a region 1
mapping VLANs to MST instance 1
MST region
CIST 1
configuring 1
described 1
hop-count mechanism 1
IST 1
supported spanning-tree instances 1
root device
configuring 1
effects of extended system ID 1
unexpected behavior 1
stack changes, effects of 1
status, displaying 1
MTU
system 1 2
system jumbo 1 2
system routing 1 2
Multicast Client Aging Robustness 1
Multicast Fast Convergence 1 2
multicast groups
static joins 1
Multicast Router Discovery 1
multicast traffic 1
multiple devices on a port 1
multiple UDP ports 1N
NameSpace Mapper 1
native VLAN 1
neighbor discovery 1
neighbor discovery, IPv6 1
Network Assistant
managing switch stacks 1
Network Load Sharing
STP path cost 1
STP priorities 1
network performance, measuring with IP SLAs 1
network policy TLV 1
non-IP traffic filtering 1
nonhierarchical policy maps
configuring 1
normal-range
VLAN configuration guidelines 1
NTP
overview 1
numbering of 1O
on Layer 2 interfaces 1
online diagnostics
described 1
overview 1
operation of 1 2
overview 1 2 3 4 5 6 7P
packet modification, with QoS 1
PaGP 1
PAgP 1
aggregate-port learners 1
described 1
interaction with other features 1
interaction with virtual switches 1
learn method and priority configuration 1
modes 1
with dual-action detection 1
password 1
password and privilege level 1
password recovery disable considerations 1
passwords
default configuration 1
disabling recovery of 1
encrypting 1
overview 1
setting
enable 1
enable secret 1
Telnet 1
with usernames 1
path cost 1
MSTP 1
STP 1
persistent self-signed certificate 1
ping
character output description 1
executing 1
overview 1
PoE
devices supported 1
supported watts per port 1
policed-DSCP map for QoS 1
policers
configuring
for more than one traffic class 1
types of 1
policing
token-bucket algorithm 1
policy maps for QoS
nonhierarchical on physical ports
configuring 1
port
priority 1
root 1
port ACLs
defined 1
types of 1
port description TLV 1
port priority 1
MSTP 1
STP 1
port security 1
and QoS trusted boundary 1
port VLAN ID TLV 1
port-based authentication
configuration guidelines 1
configuring
RADIUS server 1
RADIUS server parameters on the switch 1
default configuration 1
device roles 1
enabling
802.1X authentication 1
switch
as proxy 1
port-channel interfaces
numbering of 1
power management TLV 1
preemption delay, default configuration 1
preemption, default configuration 1
prerequisites
auto-QoS 1
QoS 1
VLAN trunks 1
VLANs 1
VMPS 1
voice VLANs 1
VTP 1
preventing unauthorized access 1
prioritization 1
priority
overriding CoS 1
priority value 1
privilege levels
changing the default for lines 1
exiting 1
logging into 1
overview 1
setting a command with 1
Protecting Enable and Enable Secret Passwords with Encryption: Example command 1
proxy reports 1
pruning-eligible list 1
PVST+
described 1
IEEE 802.1Q trunking interoperability 1
instances supported 1Q
QoS
auto-QoS
categorizing traffic 1
described 1
disabling 1
effects on running configuration 1
basic model 1
class maps
configuring 1 2
classification
DSCP transparency, described 1
forwarding treatment 1
IP ACLs, described 1
MAC ACLs, described 1 2
options for IP traffic 1
trusted CoS, described 1
configuring
aggregate policers 1 2 3
auto-QoS 1
default port CoS value 1
DSCP maps 1
DSCP transparency 1
DSCP trust states bordering another domain 1
egress queue characteristics 1
IP standard ACLs 1
policy maps on physical ports 1
port trust states within the domain 1
trusted boundary 1
default auto configuration 1
default configuration 1
egress queues
configuring shaped weights for SRR 1
configuring shared weights for SRR 1
displaying the threshold map 1
mapping DSCP or CoS values 1
WTD, described 1
enabling globally 1
implicit deny 1
IP phones
automatic classification and queueing 1
detection and trusted settings 1 2
limiting bandwidth on egress interface 1
mapping tables
CoS-to-DSCP 1 2
DSCP-CoS 1
DSCP-to-CoS 1
DSCP-to-DSCP-mutation 1
IP-precedence-to-DSCP 1 2
policed-DSCP 1
types of 1
marked-down actions 1
marking, described 1
packet modification 1
policers
configuring 1
types of 1
policing
token bucket algorithm 1
policing, described 1
QoS
classification 1
queues
configuring egress characteristics 1
high priority (expedite) 1 2
location of 1
SRR, described 1
WTD, described 1
rewrites 1
trust states
bordering another domain 1
trusted device 1
within the domain 1
QoS policy 1
queueing 1R
RADIUS 1 2
attributes
vendor-proprietary 1 2
vendor-specific 1
configuring
accounting 1
authentication 1
authorization 1
communication, global 1 2
communication, per-server 1
multiple UDP ports 1
default configuration 1
defining AAA server groups 1
identifying the server 1
key 1
limiting the services to the user 1
login 1
operation of 1
overview 1
suggested network environments 1
tracking services accessed by user 1
RADIUS Change of Authorization 1
rapid convergence 1
Rapid Spanning Tree Protocol
See RSTP 1
reconfirmation interval, changing 1
reconfirmation interval, VMPS, changing 1
reconfirming 1 2
reconfirming dynamic VLAN membership 1
reconfirming membership 1
redirecting error message output 1
redundancy
EtherChannel 1
STP
backbone 1
reference 1
references
auto-QoS 1
Remote Authentication Dial-In User Service
See RADIUS 1
remote SPAN 1
replacing 1
replacing a failed member 1
report suppression
disabling 1
report suppression, IGMP
disabling 1
resequencing ACL entries 1
reserved addresses in DHCP pools 1
responder, IP SLA
described 1
enabling 1
response time, measuring with IP SLAs 1
restricting access
overview 1
RADIUS 1
TACACS+ 1
restrictions 1
auto-QoS 1
Configuration Engine 1
MSTP 1
STP 1
VLAN trunks 1
VLANs 1
voice VLANs 1
VTP 1
retry count, changing 1
retry count, VMPS, changing 1
RFC
1305, NTP 1
RFC 5176 Compliance 1
role
port 1
root
port 1
switch 1 2
root device
MSTP 1
STP 1
routed ports 1
router ACLs
defined 1
types of 1
RSPAN 1
characteristics 1
configuration guidelines 1
default configuration 1
destination ports 1
in a device stack 1
interaction with other features 1
monitored ports 1
monitoring ports 1
overview 1
received traffic 1
session limits 1
sessions
creating 1
defined 1
limiting source traffic to specific VLANs 1
specifying monitored ports 1
with ingress traffic enabled 1
source ports 1
transmitted traffic 1
VLAN-based 1
RSTP
active topology 1
BPDU
format 1
processing 1
designated port, defined 1
designated switch, defined 1
interoperability with IEEE 802.1D
described 1
restarting migration process 1
topology changes 1
overview 1
port roles
described 1
synchronized 1
rapid convergence
cross-stack rapid convergence 1
described 1
edge ports and Port Fast 1
point-to-point links 1 2
root ports 1
root port, defined 1S
scheduling 1
SCP
and SSH 1
configuring 1
SDM
templates
configuring 1
SDM template
configuring 1
SDM templates 1
SDM templates supporting 1
secure HTTP client
configuring 1
displaying 1
secure HTTP server
configuring 1
displaying 1
Secure Shell 1
security and identification 1
See also IP traceroute 1
See EtherChannel 1 2
See EUI 1
see HTTPS 1
See IPv6 1
See RADIUS 1
See SCP 1
See TACACS+<$nopage> 1
self-signed certificate 1
service-provider network, MSTP and RSTP 1
services
networking 1
setting
enable 1
enable secret 1
Telnet 1
with usernames 1
setting a command with 1
setting a password 1
Setting a Telnet Password for a Terminal Line: Example command 1
Setting or Changing a Static Enable Password: Example command 1
setting packet forwarding 1
Setting the Privilege Level for a Command: Example command 1
SFP security and identification 1
SFP status 1
SFPs
monitoring status of 1
security and identification 1
status, displaying 1
shaped mode 1
shared mode 1
show access-lists hw-summary command 1
show forward command 1
show interfaces switchport 1
show platform forward command 1
Simple Network Management Protocol (SNMP) 1
single-switch EtherChannel 1
SNMP
and IP SLAs 1
traps
enabling MAC address notification 1 2 3
SNMP and Syslog Over IPv6 1
snooping 1
source IP address 1
source IP address filtering 1
source IP and MAC address 1
source IP and MAC address filtering 1
source-and-destination MAC address forwarding, EtherChannel 1
source-and-destination-IP address based forwarding, EtherChannel 1
source-IP address based forwarding, EtherChannel 1
source-IP address-based forwarding 1
source-MAC address forwarding 1
source-MAC address forwarding, EtherChannel 1
SPAN
default configuration 1
destination ports 1
interaction with other features 1
monitored ports 1
monitoring ports 1
overview 1
received traffic 1
session limits 1
sessions
creating 1
defined 1
limiting source traffic to specific VLANs 1
specifying monitored ports 1
with ingress traffic enabled 1
source ports 1
transmitted traffic 1
VLAN-based 1
SPAN traffic 1
Spanning Tree
states 1
spanning-tree
port priority 1
SRR
described 1
shaped mode 1
shared mode 1
SSH 1
encryption methods 1
switch stack considerations 1
user authentication methods, supported 1
SSH server 1
SSL 1
configuration guidelines 1
configuring a secure HTTP client 1
configuring a secure HTTP server 1
monitoring 1
stack changes, effects on
cross-stack EtherChannel 1
stack changes,effects on
MSTP 1
stack member
configuring
member number 1
priority value 1
replacing 1
stacks switch
replacing a failed member 1
stacks,
MSTP instances supported 1
STP
bridge ID 1
switch 1
stacks, switch
assigning information
priority value 1
MAC address of 1
stacks,switch
assigning information
member number 1
Stateless Autoconfiguration 1
static addresses
See addresses 1
static bindings
adding 1 2
static hosts 1
static joins 1
status, displaying 1
STP
BPDU message exchange 1
configuring
device priority 1
forward-delay time 1
hello time 1
maximum aging time 1
path cost 1
port priority 1
root device 1
secondary root device 1
spanning-tree mode 1
transmit hold-count 1
default configuration 1
designated ,defined
switch 1
designated port,defined 1
disabling 1
displaying status 1
extended system ID
effects on root device 1
effects on the secondary root device 1
overview 1
unexpected behavior 1
IEEE 802.1D and bridge ID 1
IEEE 802.1D and multicast addresses 1
IEEE 802.1t and VLAN identifier 1
instances supported 1
interface states 1
blocking 1
disabled 1
forwarding 1 2
learning 1
listening 1
interoperability and compatibility among modes 1 2
keepalive messages 1
limitations with IEEE 802.1Q trunks 1
modes supported 1
overview 1
protocols supported 1
redundant connectivity 1
root
election 1
switch 1 2
unexpected behavior 1
root device
effects of extended system ID 1 2
root port, defined 1
status, displaying 1
timers,described 1
STP path cost 1
STP port priorities 1
subnet mask 1
Subnetwork Access Protocol (SNAP) 1
suggested network environments 1
summer time 1
supported features 1
supported watts per port 1
SVIs
and router ACLs 1
Switch Access
displaying 1
switch stack considerations 1
switchport backup interface 1
system 1 2
system capabilities TLV 1
system clock
configuring
daylight saving time 1
manually 1
summer time 1
time zones 1
overview 1
system description TLV 1
system jumbo 1 2
system MTU 1
system name 1
manual configuration 1
system name TLV 1
system priority 1
system prompt, default setting 1
system routing 1 2T
TACACS+ 1 2
accounting, defined 1
authentication, defined 1
authorization, defined 1
configuring
accounting 1
authentication key 1
authorization 1
login authentication 1
default configuration 1
defined 1
displaying 1
identifying the server 1
key 1
limiting the services to the user 1
login 1
operation of 1
overview 1
tracking services accessed by user 1
tar files
creating 1
displaying the contents of 1
extracting 1
TCAM entries 1
Telnet 1
setting a password 1
templates
configuring 1
temporary self-signed certificate 1
Terminal Access Controller Access Control System Plus
See TACACS+<$nopage> 1
terminal lines, setting a password 1
time
See NTP and system clock 1
time ranges in ACLs 1 2
time zones 1
time-exceeded messages 1
time-range command 1
TLVs
defined 1
Token Rings 1
Topology Change Notification Processing 1
traceroute and 1
traceroute command
See also IP traceroute 1
traceroute, Layer 2
and ARP 1
and CDP 1
broadcast traffic 1
described 1
IP addresses and subnets 1
MAC addresses and VLANs 1
multicast traffic 1
multiple devices on a port 1
unicast traffic 1
usage guidelines 1
tracking services accessed by user 1 2
traffic
fragmented 1 2
traps
configuring MAC address notification 1 2 3
enabling 1 2 3
troubleshooting 1
auto-QoS 1
setting packet forwarding 1
SFP security and identification 1
show forward command 1
with debug commands 1
with ping 1
with traceroute 1
Troubleshooting Examples command 1
trunk 1
trunk failover 1
trunk interfaces 1
trunk port 1
trunking 1
trunking modes 1
trunks
allowed VLANs 1
trust states 1
trusted boundary for QoS 1
trusted port states
between QoS domains 1
classification options 1
ensuring port security for IP phones 1
within a QoS domain 1
trustpoints, CA 1
twisted-pair, detecting unidirectional links 1
types of connections 1U
UDLD
aggressive 1 2
aggressive mode
message time 1
default configuration 1
disabling
per interface 1
echoing detection mechanism 1 2
enabling
globally 1
per interface 1
fiber-optic links 1
neighbor database 1
neighbor database maintenance 1
normal 1
normal mode 1
overview 1
restrictions 1
twisted-pair links 1
unicast MAC address filtering
configuration 1
unicast traffic 1
usage guidelines 1
user authentication methods, supported 1
username-based authentication 1
using commands 1V
vendor-proprietary 1
vendor-specific 1
virtual switches and PAgP 1
VLAN
definition 1
VLAN filtering and SPAN 1
VLAN ID, discovering 1
VLAN load balancing on Flex Links
configuration guidelines 1
described 1
VLAN maps
displaying 1
VLAN membership
confirming 1
VLANs
aging dynamic addresses 1
limiting source traffic with RSPAN 1
limiting source traffic with SPAN 1
STP and IEEE 802.1Q trunks 1
VMPS 1
dynamic port membership
described 1
reconfirming 1
troubleshooting 1
entering server address 1
reconfirmation interval, changing 1
reconfirming membership 1
retry count, changing 1
VMPS client configuration
default 1
VMPS Configuration Example command 1
voice VLAN
configuration guidelines 1
configuring IP phones for data traffic
override CoS of incoming frame 1
voice VLANs 1
VRF 1
VTP 1
configuration requirements 1
version 1
VTP advertisements 1
VTP domain 1 2
VTP mode 1
VTP modes 1
VTP password 1
VTP primary 1
VTP pruning 1 2
VTP settings 1
VTP version 1
VTP version 2 1
VTP version 3 1
VTP versions 1W
web-based authentication
customizeable web pages 1
description 1
web-based authentication, interactions with other features 1
wired location service
configuring 1
location TLV 1
understanding 1
with debug commands 1
with dual-action detection 1
with ping 1
with RADIUS 1 2 3
with STP 1
with TACACS+ 1 2 3 4
with traceroute 1
with usernames 1
WTD
setting thresholds
egress queue-sets 1