Cisco VSG for VMware vSphere, Release 5.2(1)VSG2(1.4) and Cisco Prime NSC, Release 3.4.1d Installation and Upgrade Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco VSG for VMware vSphere, Release 5.2(1)VSG2(1.4) and Cisco Prime NSC, Release 3.4.1d Installation and Upgrade Guide

Chapter Title

Examples of Cisco Prime NSC OVA Template Deployment and Cisco Prime NSC ISO Installations

Results

Updated:
December 10, 2015

Chapter: Examples of Cisco Prime NSC OVA Template Deployment and Cisco Prime NSC ISO Installations

Examples of Cisco Prime NSC OVA Template Deployment and Cisco Prime NSC ISO Installations

This chapter contains the following sections:

OVA Installation Using vSphere 5.0 Installer

Before You Begin

  • Ensure that you have the Virtual Supervisor Module (VSM) IP address available

  • Ensure that you have all the proper networking information available, including the IP address you will use for your Cisco PNSC instance

  • Ensure that you have the Cisco Prime NSC ova image

Procedure
    Step 1   Open your vSphere client.
    Step 2   Click Hosts and Clusters and choose an ESXi host.
    Step 3   From the toolbar, choose File > Deploy OVF Template.
    Step 4   In the Deploy OVF Template dialog box, click Browse to choose an .ova file on your local machine, or choose a file from another location (URL).
    Step 5   From the Open dialog box, choose the appropriate .ova file and click Open.
    Step 6   Click Next.

    The OVF Template Details dialog box appears inside the Deploy OVF Template dialog box. The OVF Template Details dialog box is the first of ten pages in the Deploy OVF Template dialog box that you use to set parameters for the Cisco PNSC instance.

    Step 7   View your template details and click Next.
    Step 8   In the User License Agreement window, view the license and click Accept.
    Step 9   Click Next.
    Step 10   In the Name and Location window, do the following:
    1. In the Name field, enter a template name.
    2. In the Inventory Location area, choose the appropriate folder and click Next.
    Step 11   In the Deploy Configuration window, from the Configuration drop-down list, choose NSC Installer and click Next.
    Step 12   In the Resource Pool window, choose the appropriate location to deploy the Cisco PNSC and click Next.
    Step 13   In the Storage window, choose an appropriate location to store the virtual machine files and click Next.
    Step 14   In the Display Format window, keep default settings and click Next.
    Step 15   In the Network Mapping window, choose an appropriate configured management network VLAN for Cisco PNSC and click Next.
    Step 16   In the Properties window, in the IP Address area, do the following:
    1. Enter an IP address in the IPv4 IP Address field.
    2. Enter an IP netmask in the IPv4 IP Netmask field.
    3. Enter a gate address in the IPv4 Gateway field.
    Note   

    The netmask is defaulted to 255.255.255.0.

    Step 17   In the NSC DNS area, do the following:
    1. Enter the host name in the Host Name field.
    2. Enter an IP address in the NSC IP field.
    Step 18   In the NSC NTP area, enter the NTP server IP address in the NTP server field.
    Step 19   In the NSC Password area, enter a password in the NSC Password field or the NSC Secret field.
    Note   

    You enter the admin password in the Password field.

    Step 20   Click Next.
    Step 21   In the Ready to Complete window, verify the configuration details for Cisco PNSC and click Finish to deploy Cisco PNSC on the selected ESXi host.
    Note   

    Select Power on after deployment check box to start Cisco PNSC immediately after the deployment completes.

    The progress dialog box appears. Once the virtual machine is installed, the Deployment Completed Successfully dialog box opens.

    Step 22   Click Close.

    The Cisco PNSC instance is created.

    OVA Installation Using an ISO Image

    Procedure
      Step 1   Download a Cisco PNSC ISO to your client machine.
      Step 2   Open a vCenter client.
      Step 3   Create a virtual machine on the appropriate host as follows:
      1. Ensure your virtual machine size is 220 GB split into two disks (Disk1 having 20GB and Disk2 having 200GB).
      2. Ensure your virtual machine has 4 GB of RAM.
      3. Choose Red Hat Enterprise Linux 5 64-bit as your operating system.
      Step 4   Power on your virtual machine.
      Step 5   Mount the ISO to the virtual machine CD ROM drive as follows:
      1. Right-click the virtual machine and choose Open the VM Console.
      2. From the virtual machine console, click Connect/Disconnect CD/DVD Devices.
      3. Choose CD/DVD Drive1.
      4. Choose Connect to ISO Image on Local Disk.
      5. Choose the ISO image that you downloaded.
      Step 6   Reboot the VM using VM, Guest, and press Ctrl-Alt-Del.
      Step 7   In the ISO installer, enter the appropriate values in the ISO installer field.
      Step 8   Once installation is completed, click Reboot to create the Cisco PNSC instance.

      Was this Document Helpful?

      FeedbackFeedback

      Contact Cisco