The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
+812743 5-13
description 2-1
Changing 5-13
Cisco Nexus 7000 Series 32-port Gbps Ethernet modules
port group interface allocation 1-6, 4-4
Cisco NX-OS Licensing Guide 1-5
class-map limits A-1
VDC support 1-8
configuration limits A-1
description 1-10
control plane policing. See CoPP
VDC support 1-13
CPU shares 5-13
network-admin 1-9
network-operator 1-9
vdc-admin 1-10
vdc-operator 1-10
description 1-4
additional publications i-xii
related 2-5, 3-7
VDC management 5-30
Fabric Extender, VDC support 1-13
description (figure) 1-12
configuring 4-10
VDC support 1-14
description 1-13
creating VDCs 2-2, 4-6
VDC support 1-13
changing for VDCs 5-22
description 4-2
description 1-3
allocating 1-5, 4-2
allocating FCoE 5-2
allocating to storage VDCs 5-2
allocating to VDCs 5-9
allocation 5-2
VDC support 1-14
description 1-3
VDC resource templates 3-3
creating VDCs 2-2, 4-6
limit-resource module-type command 5-18
limits, configuration A-1
description 1-7
namespaces 1-7
per VDC 5-7
description 1-11
match criteria limit A-1
description 1-7
limitations 1-8
description 1-9
description 1-5
policy map limits A-1
port groups 1-6
allocation requirements 1-6, 4-4
creating VDCs 4-6
VDC support 1-14
creating VDCs 4-17
description 1-8
service policy limits A-1
configuring 4-10
superuser roles. See network-admin roles
modules 1-1, 2-1
storage VDCs 4-10
description 1-9
description 1-10
saving 5-24
verifying 5-30
example configurations 5-30
guidelines 5-8
HA policies 5-6
interface allocation 5-2
limitations 5-8
prerequisites 5-8
resource limits 5-6
saving to startup configuration 5-6
description 1-10
changing limits 5-13
description 1-5
configuring 3-4
applying 5-11
default limits 3-2
description 3-1
example configuration 3-7
guidelines 3-3
limitations 3-3
resources 3-1
verifying configuration 3-7
allocating interfaces 5-9
applying VDC resource templates 5-11
architecture 1-3
changing HA policies 5-22
changing resource limits 5-13
CLI prompt format 5-9
communication between 1-4
configuration files 1-8
creating 4-1 to 4-5, 4-8 to 4-12
creation process 4-7
default settings 4-7
default user roles 1-9
deleting 5-29
description 1-1
example setup dialog 4-13
fault isolation (figure) 1-12
FCoE 1-4
feature support 1-13
guidelines for creating 2-2, 4-6
infrastructure layer 1-3
initializing 4-5, 4-12
kernel 1-3
limitations for creating 2-2, 4-6
management 1-9 to 1-12
management connections 1-11
managing 5-8 to 5-30
namespaces 1-7
prerequisites for creating 4-6
reloading 5-7, 5-27
resource templates 1-8
restarting 5-6, 5-28
restarting from HA failures 5-7
resuming 5-26
shared interfaces 1-5
storage 1-4
suspending 5-6, 5-25
verifying configuration 4-13, 5-30
Index
+812743 5-13
description 2-1
Changing 5-13
Cisco Nexus 7000 Series 32-port Gbps Ethernet modules
port group interface allocation 1-6, 4-4
Cisco NX-OS Licensing Guide 1-5
class-map limits A-1
VDC support 1-8
configuration limits A-1
description 1-10
control plane policing. See CoPP
VDC support 1-13
CPU shares 5-13
network-admin 1-9
network-operator 1-9
vdc-admin 1-10
vdc-operator 1-10
description 1-4
additional publications i-xii
related 2-5, 3-7
VDC management 5-30
Fabric Extender, VDC support 1-13
description (figure) 1-12
configuring 4-10
VDC support 1-14
description 1-13
creating VDCs 2-2, 4-6
VDC support 1-13
changing for VDCs 5-22
description 4-2
description 1-3
allocating 1-5, 4-2
allocating FCoE 5-2
allocating to storage VDCs 5-2
allocating to VDCs 5-9
allocation 5-2
VDC support 1-14
description 1-3
VDC resource templates 3-3
creating VDCs 2-2, 4-6
limit-resource module-type command 5-18
limits, configuration A-1
description 1-7
namespaces 1-7
per VDC 5-7
description 1-11
match criteria limit A-1
description 1-7
limitations 1-8
description 1-9
description 1-5
policy map limits A-1
port groups 1-6
allocation requirements 1-6, 4-4
creating VDCs 4-6
VDC support 1-14
creating VDCs 4-17
description 1-8
service policy limits A-1
configuring 4-10
superuser roles. See network-admin roles
modules 1-1, 2-1
storage VDCs 4-10
description 1-9
description 1-10
saving 5-24
verifying 5-30
example configurations 5-30
guidelines 5-8
HA policies 5-6
interface allocation 5-2
limitations 5-8
prerequisites 5-8
resource limits 5-6
saving to startup configuration 5-6
description 1-10
changing limits 5-13
description 1-5
configuring 3-4
applying 5-11
default limits 3-2
description 3-1
example configuration 3-7
guidelines 3-3
limitations 3-3
resources 3-1
verifying configuration 3-7
allocating interfaces 5-9
applying VDC resource templates 5-11
architecture 1-3
changing HA policies 5-22
changing resource limits 5-13
CLI prompt format 5-9
communication between 1-4
configuration files 1-8
creating 4-1 to 4-5, 4-8 to 4-12
creation process 4-7
default settings 4-7
default user roles 1-9
deleting 5-29
description 1-1
example setup dialog 4-13
fault isolation (figure) 1-12
FCoE 1-4
feature support 1-13
guidelines for creating 2-2, 4-6
infrastructure layer 1-3
initializing 4-5, 4-12
kernel 1-3
limitations for creating 2-2, 4-6
management 1-9 to 1-12
management connections 1-11
managing 5-8 to 5-30
namespaces 1-7
prerequisites for creating 4-6
reloading 5-7, 5-27
resource templates 1-8
restarting 5-6, 5-28
restarting from HA failures 5-7
resuming 5-26
shared interfaces 1-5
storage 1-4
suspending 5-6, 5-25
verifying configuration 4-13, 5-30