Administering DCNM-LAN Server Log Settings
This chapter describes how to administer the DCNM-LAN Server Log Settings feature in Cisco Data Center Network Manager for LAN (DCNM-LAN).
The Cisco DCNM server maintains a log file of its operations. The log file contains information from Cisco DCNM features and server components.
Note The DCNM Server Log Settings feature does not affect logging levels of Cisco NX-OS devices. Cisco DCNM does not support the configuration of device logging levels.
This chapter includes the following sections:
Information About Administering DCNM-LAN Server Log Settings
The DCNM-LAN server maintains a log file of its operations. The log file contains information from DCNM-LAN features and server components.
Note The DCNM-LAN Server Log Settings feature does not affect logging levels of Cisco NX-OS devices. DCNM-LAN does not support the configuration of device logging levels.
This section includes the following topics:
Logging Levels
The DCNM-LAN server supports a hierarchy of logging levels, ordered by the severity of log messages. Each level includes messages for that level in addition to all log messages from levels of higher severity. The logging levels, in order from the highest to the lowest severity, are as follows:
-
Fatal Errors
-
Errors
-
Warnings
-
Information
-
Debugging
-
Verbose
Log File and Location
The DCNM-LAN server writes server log messages to the sys.pipe file at the following location:
By default, when you install the DCNM-LAN server on Microsoft Windows Server, INSTALL_DIR is C:\Program Files\Cisco Systems\dcnm.
Virtualization Support
DCNM-LAN server logs do not contain log messages from Cisco NX-OS devices; therefore, this feature has no effect on virtualization support.
Licensing Requirements for Administering DCNM-LAN Server Log Settings
The following table shows the licensing requirements for this feature:
|
|
Cisco DCNM-LAN
|
DCNM-LAN Server Log Settings requires no license. Any feature not included in a license package is bundled with the Cisco DCNM-LAN and is provided at no charge to you. For information about obtaining and installing a Cisco DCNM LAN Enterprise license, see the
Cisco DCNM Installation and Licensing Guide, Release 7.1.x
.
|
Prerequisites for Administering DCNM-LAN Server Log Settings
Administering DCNM-LAN server log settings has the following prerequisites:
-
You should be familiar with a DCNM-LAN feature before you configure server log settings for it.
Guidelines and Limitations for Administering DCNM-LAN Server Log Settings
The Administering DCNM-LAN server log settings feature has the following configuration guidelines and limitations:
-
Setting a logging level to a lower severity results in more messages in the log file.
-
We recommend using the default logging settings unless you are troubleshooting an issue.
-
When you are troubleshooting an issue, consider lowering the logging level severity of the affected feature or server component.
-
After you resolve an issue, consider restoring the logging level of the affected feature or server component to a higher severity.
Configuring DCNM-LAN Server Log Settings
This section includes the following topics:
Configuring the Default Logging Level
You can configure the default logging level for all DCNM-LAN features and server components.
BEFORE YOU BEGIN
Determine what the default logging level should be. For more information, see the “Logging Levels” section.
DETAILED STEPS
Step 1 From the Feature Selector pane, choose
DCNM Server Administration > DCNM Server Log Settings
.
The log settings appear in the Contents pane.
Step 2 From the Default Logging Level drop-down list, choose the logging level.
Step 3 From the menu bar, choose
File > Deploy
to apply your changes to the DCNM-LAN server.
Configuring a Unique Logging Level for a Feature or Server Component
You can configure a logging level of a feature or server component that is independent of the default logging level.
BEFORE YOU BEGIN
Determine what the logging level of the feature or service should be. For more information, see the “Logging Levels” section.
DETAILED STEPS
Step 1 From the Feature Selector pane, choose
DCNM Server Administration > DCNM Server Log Settings
.
The log settings appear in the Contents pane.
Step 2 Find the feature or server component that you want to configure with a unique logging level.
Step 3 Uncheck
Default
to the right of the feature or server component.
The logging level drop-down list for the feature or server component becomes available.
Step 4 From the logging level drop-down list, choose the logging level. For more information, see the “Logging Levels” section.
Step 5 From the menu bar, choose
File > Deploy
to apply your changes to the DCNM-LAN server.
Configuring a Feature or Server Component to Use the Default Logging Level
You can configure a feature or server component to use the default logging level.
BEFORE YOU BEGIN
Ensure that the default logging level is appropriate for the feature or service. For more information, see the “Logging Levels” section.
DETAILED STEPS
Step 1 From the Feature Selector pane, choose
DCNM Server Administration > DCNM Server Log Settings
.
The log settings appear in the Contents pane.
Step 2 Find the feature or server component that you want to use the default logging level.
Step 3 Check
Default
to the right of the feature or service.
The logging level drop-down list for the feature or server component becomes unavailable.
Step 4 From the menu bar, choose
File > Deploy
to apply your changes to the DCNM-LAN server.
Viewing DCNM-LAN Server Log Settings
To view DCNM-LAN server user accounts, from the Feature Selector pane, choose
DCNM Server Administration > DCNM Server Log Settings
.
The default logging level, feature logging settings, and server component logging settings appear in the Contents pane. For information about the fields that appear, see the “Field Descriptions for DCNM-LAN Server Log Settings” section.
Field Descriptions for DCNM-LAN Server Log Settings
This section includes the following field descriptions for DCNM-LAN server log settings:
DCNM-LAN Server Log Settings Contents Pane
Table 32-1 DCNM-LAN Server Log Settings Contents Pane
|
|
Default Logging Level
|
Logging level for the features or server components whose Default check box is checked. The default value for this list is Informational. For more information about logging levels, see the “Logging Levels” section.
|
|
Default
|
Whether logging for the corresponding feature uses the default logging level or the logging level specified for the feature. When a Default check box is checked, the logging level list for the corresponding feature is unavailable. By default, these check boxes are unchecked.
|
AAA
|
Logging level for the AAA feature.
|
ACL
|
Logging level for the access control list feature.
|
Dot1X
|
Logging level for the 802.1X feature.
|
GLBP
|
Logging level for the Gateway Load-Balancing Protocol feature.
|
Interfaces
|
Logging level for the Interfaces feature.
|
Key Chain
|
Logging level for the keychain management feature.
|
Layer 2 Security
|
Logging level for the layer 2 security feature, which are as follows:
-
Dynamic ARP inspection
-
Port security
-
DHCP snooping
-
IP Source Guard
-
Traffic storm control
|
Object Tracking
|
Logging level for the object tracking feature.
|
Port Channel
|
Logging level for the port security feature.
|
SPAN
|
Logging level for the SPAN feature.
|
Spanning Tree
|
Logging level for the STP feature.
|
Tunnel
|
Logging level for the tunnel interface management feature.
|
Virtual Devices
|
Logging level for the virtual device context feature.
|
VLAN
|
Logging level for the VLAN feature.
|
FabricExtender
|
Logging level for the Fabric Extender feature.
|
VPC
|
Logging level for the vPC feature.
|
HSRP
|
Logging level for the HSRP feature.
|
DEVICE GROUP
|
Logging level for the Device Groups feature.
|
DCNM-LAN Server Components
|
Default
|
Whether logging for the corresponding server component uses the default logging level or the logging level specified for the component. When a Default check box is checked, the logging level list for the corresponding component is unavailable. By default, these check boxes are unchecked.
|
Event
|
Logging level for the event component, which includes messages about how DCNM-LAN processes the system and accounting logs it retrieves from devices and also events generated by DCNM-LAN.
|
Statistics Collection
|
Logging level for the statistical data collection component.
|
Config Archive
|
Logging level for the configuration archive component, used by the Configuration Change Management feature.
|
Device Connections
|
Logging level for the component that connects the DCNM-LAN server to devices.
|
Device Discovery
|
Logging level for the component that performs device discovery.
|
Additional References
For additional information related to administering DCNM-LAN server log settings, see the following sections:
Standards
|
|
No new or modified standards are supported by this feature, and support for existing standards has not been modified by this feature.
|
—
|
Feature History for DCNM-LAN Server Log Settings
Table 32-2
lists the release history for this feature.
Table 32-2 Feature History for DCNM-LAN Server Log Settings
|
|
|
Device Groups logging
|
5.0(2)
|
Support was added for configuring the logging level for the Device Groups feature.
|