Configuration Limits

Available Languages

Download Options

  • PDF     (76.8 KB)
    View with Adobe Reader on a variety of devices
Updated:April 2, 2008

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuration Limits for Cisco NX-OS Layer 3 Unicast Features, Release 4.x

Table Of Contents

Configuration Limits for Cisco NX-OS Layer 3 Unicast Features, Release 4.x


Configuration Limits for Cisco NX-OS Layer 3 Unicast Features, Release 4.x

The features supported by Cisco NX-OS have maximum configuration limits. For some of the features, we have verified configurations that support limits less that the maximum. Table 2-1 lists the Cisco verified limits and maximum limits for switches running Cisco NX-OS Release 4.x.

Table 2-1 Cisco NX-OS Release 4.x Configuration Limits 

Feature
Verified Limit
Maximum Limit

Layer 3 subinterfaces

1000

 

BGP

 

300 peers

 

150,000 prefixes per peer

 

20 million paths total

GLBP

1000 GLBP groups per system, with default timers.

1024 GLBP groups.

 

200 GLBP groups per interface.

 

HSRP

2000 HSRP groups per system, with default timers.

2048 HSRP groups.

500 HSRP groups per physical interface or VLAN interface. 100 HSRP groups per port-channel interface.

 

Object tracking

500 objects.

 

OSPF

 

200 interfaces

 

1000 routers

 

300 adjacencies

 

200,000 LSAs

VRFs

200 per VDC

 

VRRP

255 groups

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco