The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Caveats describe unexpected behavior in a product. The Open Caveats section lists open caveats that apply to the current release and may apply to previous releases. A caveat that is open for a prior release and is still unresolved applies to all future releases until it is resolved.
To view the details of the software bugs pertaining to your product, perform the following task:
The corresponding Bug Search Tool window is displayed with details of the Caveat ID/Bug ID.
The Bug Search Tool (BST), which is the online successor to the Bug Toolkit, is designed to improve the effectiveness in network risk management and device troubleshooting. The BST allows partners and customers to search for software bugs based on product, release, and keyword, and aggregates key data, such as bug details, product, and version. The tool has a provision to filter bugs based on credentials to provide external and internal bug views for the search input.
To view the details of a caveat whose ID you do not have, perform the following procedure:
For more information about how to use the Cisco Bug Search Tool effectively, including how to set email alerts for bugs and to save bugs and searches, see Bug Search Tool Help & FAQ.
This chapter lists the Open and Resolved Caveats in Cisco DCNM, and contains the following section:
Cisco DCNM, Release 10.2(1)
The following table lists the Resolved bugs for Cisco DCNM, Release 10.2(1).
|
Caveat ID Number |
Description |
|---|---|
|
SAN reports missing from the View page on upgraded an setup. |
|
|
The select/clear all check box is not working properly under networks. |
|
|
UI grayed out after adding a network without any Org or Parts. |
|
|
NVT: RP Array in Nexus 9000 spine template is not reflecting the change. |
|
|
Spine hostname and interface tab info are missing in POAP definitions |
|
|
OVA upgrade: The "error: cannot contact server\" apperas on localtime for standby DCNM. |
|
|
Patch: After removal of patch, unable to log in to DCNM due to authentication failure. |
|
|
DCNM (10.0): OU_BASE missing on templates after upgrade |
|
|
Dashboard > Compute/Storage topology print/export function not working. |
|
|
Custom report generation using Visio topology throws an exception. |
|
|
DCNM 10.0(1): Import template does not set POAP and Publish options. |
|
|
DCNM-10.0: Deleting the template from GUI does not remove it from the file system. |
|
|
Boolean Mandatory values show red (mandatory) asterisk next to check box. |
|
|
DCNM DB lost during upgrade with non-default install location |
|
|
Upgrade from 7.2(3) to 10.x with postgres will fail on RHEL 6.4 |
|
|
Duplicated TFTP process in HA; service fails |
|
|
From the DCNM <Installdir>/dcm/dcnm/bin after running dcnm-log-capture script, the script is stopping at collecting database backup. |
|
|
VNX not masking Host in green field deployment |
|
|
Nexus 9000: 92160 - breakout port is "unknown" in DM, but up in webUI/CLI |
|
|
VSAN filter issue in Cisco Device Manager. |
|
|
DCNM Connect - Sometimes the newly masked entries are temporarily disappearing. |
|
| The DCNM WebUI login fails. The "Authentication Failure" message appears. | |
|
DCNM WebUI Login Fails; an "Authentication Failure" error occurs. |
|
|
Network profiles' DHCP IP range missing after upgrade from release 10.0.1 |
|
|
The VOAP of Nexus 7000 VDC fails to start, and an error message appears. |
|
|
Entering previously used BGP ASN creates conf file in DCNM server unnecessarily. |
|
|
Performance collection not showing correct data. |
The following table lists the Open bugs for Cisco DCNM, Release 10.2(1).
|
Caveat ID Number |
Description |
|---|---|
|
Cisco DCNM managing the a scale-setup (50+) with performance monitoring and EPL enabled, may become inactive. |
|
|
Unable to add/register DCNM with 10.1.1 / 10.1.2 / 10.0.1 CCO build in the Multi Site Manager page (Administration / DCNM Server / Multi Site Manager). |
|
|
The Endpoint Activities page becomes untidy after switching between the history and activities pages. |
|
| Memory error occurs while creating a network. | |
|
No support for FEX on breakout ports on Cisco Nexus 9000 switches; this needs to be updated in documentation. |
|
|
EPL: After rebooting vPC active, the port value changes to "vPC Peer-link" |
|
|
Performance data is not shown for HIF interfaces. |
|
|
Endpoint Locator: The end-hosts take a while to get learnt on the Endpoint Activity Page. |
|
|
Endpoint Locator: Visualize Response Timeout after 30000ms seen intermittently. |
|
|
Scale Setup:Real time jobs are not performed for devices. |
|
|
Users should be notified that DCNM is loading selected device for the backup job. |
|
|
The appmgr restore all command is not restoring the webUI Media Controller menus. |
|
|
SFTP IP reverted from eth0 back to eth1 IP after an upgrade. |
|
|
The voap.py script is getting replaced with the file that is there in backup file with upgrade. |
|
|
AMQP service is stopping even if started manually after running the appmgr restore all command. |
|
|
The template does not throw any validation error when "}" is not provided. |
|
|
During Cisco DCNM configuration with EPL, create swap space of about 1 Gig. |
|
|
The Endpoint Locator Activity shows error when you select any value from the drop down lis of EPL history. |
|
|
Endpoint Locator: The Download Raw feature failed to download endpoints when you use the Internet Explorer browser. |
|
| CSCvf46667 |
The Partitions drop-down options are not sorted in the Configure > LAN Fabric Auto-Configuration > Networks list screen. |
|
Unable to start the Endpoint Locator feature for fabric switch sending color characters |
Cisco DCNM POAP Template Package Release 10.2(1)ST(1)
The following table lists the Resolved bugs for Cisco DCNM POAP Template Package Release 10.2(1)ST(1).
|
Caveat ID Number |
Description |
|---|---|
|
Replacing tab name from Multicast to BUM Replication. |
|
|
POAP template changes for top down provisioning. |
|
|
Nexus 7000 POAP templates do not support the Secure LDAP option. |
|
|
POAP Deploy without admin user creates lock out scenario on Nexus. |
The following table lists the Open bugs for Cisco DCNM POAP Template Package Release 10.2(1)ST(1).
|
Caveat ID Number |
Description |
|---|---|
|
Default Host VLANs field set to allowed-vlan None for host interfaces in top-down fabric |
|
|
Configured values are wiped out during edit POAP in multi fabric POD. |
|
|
BUM Replication tab shows an Anycast RP Address from the General Settings for IR fabric. |
|
| Nexus 9500 with N9K-C9504-FM-E modules are powered off after POAP with IPFabric_N9K_Leaf template |
Feedback