Cisco Nexus 9000 Series ACI-Mode Switch FPGA/EPLD Upgrade Release Notes, Release 12.1(1x)
Available Languages
Cisco Nexus 9000 Series ACI-Mode Switch FPGA/EPLD Upgrade Release Notes, Release 12.1(1x)
This document lists the current and past versions of EPLD images and describes how to update them for use with the Cisco Nexus 9000 Series switches.
The following table lists the changes to this document.
| Date | Description |
| October 2, 2016 | Created the release notes for Release 12.1(1x). |
| November 2, 2016 | Added PIDs for Cisco Nexus 93108TC-EX and 93180YC-EX in table. |
| November 29, 2016 | Updated EPLD images for the N9K-X9732C-EX line card and Cisco Nexus 9372PX-E switch. |
Introduction
The Cisco Nexus 9000 Series ACI-mode switches contain several programmable logical devices (PLDs) that provide hardware functionalities in all modules. Cisco provides electronic programmable logic device (EPLD) image upgrades to enhance hardware functionality or to resolve known issues. PLDs include electronic programmable logic devices (EPLDs), field programmable gate arrays (FPGAs), and complex programmable logic devices (CPLDs), but they do not include ASICs. In this document, the term EPLD is used for FPGA and CPLDs.
The advantage of having EPLDs for some module functions is that when you need to upgrade those functions, you just upgrade their software images instead of replacing their hardware.
NOTE: EPLD image upgrades for an I/O module disrupt the traffic going through the module because the module must power down briefly during the upgrade. The system performs EPLD upgrades on one module at a time, so at any one time the upgrade disrupts only the traffic going through one module.
Cisco provides the latest EPLD images with each release. Typically, these images are the same as provided in earlier releases but occasionally some of these images are updated. These EPLD image updates are not mandatory unless otherwise specified.
When Cisco makes an EPLD image upgrade available, these release notes announce their availability, and you can download them from http://www.cisco.com.
Deciding When to Upgrade EPLDs
When new EPLD images are available, the upgrades are always recommended if your network environment allows for a maintenance period in which some level of traffic disruption is acceptable. If such a disruption is not acceptable at this time, then you might consider postponing the upgrade until a better time.
NOTE: The EPLD upgrade operation is a disruptive operation. You should execute this operation only at a programmed maintenance time.
Switch Requirements
The Cisco Nexus 9000 Series switch must be running the Cisco ACI operating system and include the following hardware:
· Supervisor modules (2)—each with at least 800 MB of available bootflash memory (Cisco Nexus 9504, 9508, and 9516 switches)
· System controller modules (2) (Cisco Nexus 9504, 9508, and 9516 switches)
· I/O modules (Cisco Nexus 9504, 9508, and 9516 switches)
o Cisco Nexus 9504 switch (1-4 modules)
o Cisco Nexus 9508 switch (1-8 modules)
o Cisco Nexus 9516 switch (1-10 modules)
· Fabric modules (Cisco Nexus 9504, 9508, and 9516 switches)
o Fabric modules for 40-Gigabit I/O modules on a Cisco Nexus 9504, 9508, or 9516 switch (3-6)
o Fabric modules for 100-Gigabit I/O modules on a Cisco Nexus 9504 or 9508 switch (4)
o Cisco Nexus 93120TX switch (2)
o Cisco Nexus 93128TX, 9396PX, and 9396TX switch (3)
o Cisco Nexus 93108TC-EX, 93180LC-EX, 93180YC-EX, 9332PQ, 9372PX, 9372PX-E, 9372TX, or 9372TX-E switch (4)
o Cisco Nexus 9504, 9508, or 9516 switch (3)
o 650-W AC power supplies (2) or 930-W DC power supplies (2) for the Cisco Nexus 93108TC-EX, 93180YC-EX, 9332PQ, 9372PX, 9372PX-E, 9372TX, 9372TX-E, 9396PX, and 9396TX switches
o 1200-W AC power supplies (2) or 930-W DC power supplies (2) for the Cisco Nexus 93120TX and 9336PQ switches
o 1200-W HVAC/HVDC power supplies (2) for the Cisco Nexus 93108TC-EX, 93120TX, 93128TX, and 93180YC-EX switches
o 3000-W power supplies (AC, Universal AC/DC, or DC) for Cisco Nexus 9500 switches
§ Cisco Nexus 9504 switch (up to 4)
§ Cisco Nexus 9508 switch (up to 8)
§ Cisco Nexus 9516 switch (up to 10)
· Uplink module (Cisco Nexus 93128TX, 9396PX, and 9396TX switches only)
You must have administrator privileges to work with the Cisco Nexus 9000 Series switch.
EPLD Upgrades Available for ACI Mode Releases 11.2(1i) to 12.1(1x)
Each EPLD image that you can download from http://www.cisco.com is a bundle of EPLD upgrades. To see the updated EPLD versions for the Cisco Nexus Cisco Nexus 93000 ACI-mode fixed switches, and the Cisco Nexus 9500 ACI-mode modular switches, see the following tables.
NOTE: All updates to an image are shown in boldface. If more than one release is shown for a column, the boldface applies to the first release listed for the column.
Available EPLD Images for the Cisco Nexus 92000 and 93000 Top-of-Rack Switches
| Component | EPLD | Releases 11.2(2g) | Release | Release | Release |
| Cisco Nexus 93108TC-EX (N9K-C93108TC-EX) | IOFPGA | N.A.1 | N.A.[1] | 0x3 (0.003) | 0x3 (0.003) |
| MIFPGA | N.A.1 | N.A.1 | 0x2 (0.002) | 0x2 (0.002) | |
| Cisco Nexus 93120TX (N9K-C93120TX) | IOFPGA | 0x8 (0.008) | 0x8 (0.008) | 0x8 (0.008) | 0x8 (0.008) |
| MIFPGA | 0x10 (0.016) | 0x10 (0.016) | 0x10 (0.016) | 0x10 (0.016) | |
| MIFPGA | 0x9 (0.009) | 0x9 (0.009) | 0x9 (0.009) | 0x9 (0.009) | |
| Cisco Nexus 93128TX (N9K-C93128TX) | IOFPGA | 0x10 (0.016) | 0x10 (0.016) | 0x10 (0.016) | 0x11 (0.017) |
| MIFPGA | 0x9 (0.009) | 0x9 (0.009) | 0x9 (0.009) | 0x9 (0.009) | |
| Cisco Nexus 93180YC-EX (N9K-C93180YC-EX) | IOFPGA | N.A.1 | 0x3 (0.003) | 0x3 (0.003) | 0x3 (0.003) |
| MIFPGA | N.A.1 | 0x4 (0.004) | 0x4 (0.004) | 0x4 (0.004) | |
| Cisco Nexus 9332PQ (N9K-C9332PQ) | IOFPGA | 0x11 (0.017) | 0x11 (0.017) | 0x11 (0.017) | 0x12 (0.018) |
| MIFPGA | 0x15 (0.021) | 0x16 (0.022) | 0x16 (0.022) | 0x17 (0.023) | |
| Cisco Nexus 9336PQ (N9K-C9336PQ) | IOFPGA | 0x9 (0.009) | 0x9 (0.009) | 0x9 (0.009) | 0x9 (0.009) |
| MIFPGA | 0x10 (0.016) | 0x10 (0.016) | 0x10 (0.016) | 0x10 (0.016) | |
| Cisco Nexus 9372PX (N9K-C9372PX) | IOFPGA | 0x7 (0.007) | 0x7 (0.007) | 0x7 (0.007) | 0x8 (0.008) |
| MIFPGA | 0x14 (0.020) | 0x14 (0.020) | 0x14 (0.020) | 0x15 (0.021) | |
| Cisco Nexus 9372PX-E (N9K-C9372PX-E) | IOFPGA | 0x7 (0.007) | 0x7 (0.007) | 0x7 (0.007) | 0x8 (0.008) |
| MIFPGA | 0x14 (0.020) | 0x14 (0.020) | 0x14 (0.020) | 0x15 (0.021) | |
| Cisco Nexus 9372TX (N9K-C9372TX) | IOFPGA | 0x5 (0.005) | 0x5 (0.005) | 0x5 (0.005) | 0x6 (0.006) |
| MIFPGA | 0x15 (0.021) | 0x15 (0.021) | 0x15 (0.021) | 0x15 (0.021) | |
| Cisco Nexus 9372TX-E (N9K-C9372TX-E) | IOFPGA | 0x5 (0.005) | 0x5 (0.005) | 0x5 (0.005) | 0x5 (0.005) |
| MIFPGA | 0x2 (0.002) | 0x3 (0.003) | 0x3 (0.003) | 0x3 (0.003) | |
| Cisco Nexus 9396PX (N9K-C9396PX) | IOFPGA | 0x15 (0.021) | 0x15 (0.021) | 0x15 (0.021) | 0x15 (0.021) |
| MIFPGA | 0x14 (0.020) | 0x14 (0.020) | 0x14 (0.020) | 0x14 (0.020) | |
| Cisco Nexus 9396TX (N9K-C9396TX) | IOFPGA | 0x8 (0.008) | 0x8 (0.008) | 0x8 (0.008) | 0x8 (0.008) |
| 6-port 40-Gigabit optical uplink module | MIFPGA | 0x10 (0.016) | 0x10 (0.016) | 0x10 (0.016) | 0x10 (0.016) |
| 12-port optical uplink module (N9K-M12PQ) | MIFPGA | 0x20 (0.032) | 0x20 (0.032) | 0x20 (0.032) | 0x20 (0.032) |
Available EPLD Images for the Cisco Nexus 9500 Modular Switches
| Component | EPLD | Releases 11.2(2g) | Release | Release | Release |
| Supervisor A (N9K-SUP-A) | IOFPGA | 0x27 (0.039) | 0x27 (0.039) | 0x27 (0.039) | 0x27 (0.039) |
| Supervisor B (N9K-SUP-B) | IOFPGA | 0x27 (0.039) | 0x27 (0.039) | 0x27 (0.039) | 0x27 (0.039) |
| System Controller (N9K-SC-A) | IOFPGA | 0x19 (0.025) | 0x20 (0.032) | 0x20 (0.032) | 0x20 (0.032) |
| 32-port 100-Gigabit QSFP28 I/O module | IOFPGA | N.A.2 | 0x7 (0.007) | 0x7 (0.007) | 0x7 (0.007) |
| MIFPGA | N.A.2 | 0x6 (0.006) | 0x6 (0.006) | 0x6 (0.006) | |
| 36-port 40-Gigabit QSFP+ I/O module | IOFPGA | 0x5 (0.005) | 0x5 (0.005) | 0x5 (0.005) | 0x5 (0.005) |
| MIFPGA | 0x5 (0.005) | 0x5 (0.005) | 0x5 (0.005) | 0x5 (0.005) | |
| Fabric module for 40-Gigabit I/O modules in Cisco Nexus 9504 chassis (N9K-C9504-FM) | IOFPGA | 0x18 (0.024) | 0x19 (0.025) | 0x19 (0.025) | 0x19 (0.025) |
| Fabric module for –E 100-Gigabit I/O modules in Cisco Nexus 9504 chassis (N9K-C9504-FM-E) | IOFPGA | N.A.[2] | 0x9 (0.009) | 0x9 (0.009) | 0x9 (0.009) |
| Fabric module for 40-Gigabit Cisco Nexus 9508 chassis (N9K-C9508-FM) | IOFPGA | 0x19 (0.025) | 0x19 (0.025) | 0x19 (0.025) | 0x19 (0.025) |
| Fabric module for –EX 100-Gigabit I/O modules in Cisco Nexus 9508 chassis (N9K-C9508-FM-E) | IOFPGA | N.A.2 | 0x5 (0.005) | 0x5 (0.005) | 0x5 (0.005) |
| Fabric module for 40-Gigabit I/O modules in Cisco Nexus 9516 chassis (N9K-C9516-FM) | IOFPGA | 0x13 (0.019) | 0x13 (0.019) | 0x13 (0.019) | 0x13 (0.019) |
Related Documentation
Cisco Application Centric Infrastructure (ACI) Documentation
The ACI documentation is available at the following URL: http://www.cisco.com/c/en/us/support/ cloud-systems-management/application-policy-infrastructure-controller-apic/ tsd-products-support-series-home.html.
Cisco Application Centric Infrastructure (ACI) Simulator Documentation
The Cisco ACI Simulator documentation is available at http://www.cisco.com/c/en/us/support/ cloud-systems-management/application-centric-infrastructure-simulator/tsd-products-support-series-home.html.
Cisco Nexus 9000 Series Switches Documentation
The Cisco Nexus 9000 Series Switches documentation is available at http://www.cisco.com/c/en/us/support/ switches/nexus-9000-series-switches/tsd-products-support-series-home.html.
Cisco Application Virtual Switch Documentation
The Cisco Application Virtual Switch (AVS) documentation is available at http://www.cisco.com/c/en/us/ support/switches/application-virtual-switch/tsd-products-support-series-home.html.
Cisco Application Centric Infrastructure (ACI) Integration with OpenStack Documentation
Cisco ACI integration with OpenStack documentation is available at http://www.cisco.com/c/en/us/support/ cloud-systems-management/application-policy-infrastructure-controller-apic/ tsd-products-support-series-home.html.
Release Notes
The release notes are available at the following URL:
http://www.cisco.com/en/US/products/ps13386/prod_release_notes_list.html
Documentation Feedback
To provide technical feedback on this document, or to report an error or omission, please send your comments to apic-docfeedback@cisco.com. We appreciate your feedback.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What's New in Cisco Product Documentation, at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.
Subscribe to What's New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.
The following information is for FCC compliance of Class B devices: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment causes interference to radio or television reception, which can be determined by turning the equipment off and on, users are encouraged to try to correct the interference by using one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Modifications to this product not authorized by Cisco could void the FCC approval and negate your authority to operate the product.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED "AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: http://www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
© 2016 Cisco Systems, Inc. All rights reserved.
FeedbackContact Cisco
- Open a Support Case
- (Requires a Cisco Service Contract)